Refactor codebase

run.sh

@@ -4,116 +4,46 @@ set -eu
 /run/server.sh 5000 > /dev/null &
 
 if /run/install.sh; then
-  echo "Starting DSM for Docker..."
+  echo "Starting Virtual DSM..."
 else
-  echo "Installation failed (code $?)" && exit 80
+  echo "Installation failed (code $?)" && exit 81
 fi
 
-IMG="/storage"
-BASE=$(basename "$URL" .pat)
+KVM_NET_OPTS=""
+KVM_MON_OPTS=""
+KVM_ACC_OPTS=""
+KVM_DISK_OPTS=""
+KVM_SERIAL_OPTS=""
 
-FILE="$IMG/$BASE.boot.img"
-[ ! -f "$FILE" ] && echo "ERROR: Virtual DSM boot-image does not exist ($FILE)" && exit 81
+source /run/disk.sh
 
-FILE="$IMG/$BASE.system.img"
-[ ! -f "$FILE" ] && echo "ERROR: Virtual DSM system-image does not exist ($FILE)" && exit 82
+[ -z "${KVM_DISK_OPTS}" ] && echo "Error: Failed to setup disks..." && exit 83
 
-FILE="$IMG/data$DISK_SIZE.img"
-if [ ! -f "$FILE" ]; then
-    truncate -s "$DISK_SIZE" "$FILE"
-    mkfs.btrfs -q -L data -d single -m single "$FILE" > /dev/null
-    #qemu-img convert -f raw -O qcow2 -o extended_l2=on,cluster_size=128k,compression_type=zstd,preallocation=metadata "$TMP" "$FILE"
-fi
+source /run/network.sh
 
-[ ! -f "$FILE" ] && echo "ERROR: Virtual DSM data-image does not exist ($FILE)" && exit 83
+[ -z "${KVM_NET_OPTS}" ] && echo "Error: Failed to setup network..." && exit 84
 
-if ! /run/network.sh; then
-  echo "Network setup failed (code $?)" && exit 84
-fi
+source /run/serial.sh
 
-# Start the Serial Emulator
+[ -z "${KVM_SERIAL_OPTS}" ] && echo "Error: Failed to setup serial..." && exit 85
 
-HOST_SERIAL=$(/run/serial.sh)
-GUEST_SERIAL=$(/run/serial.sh)
+source /run/power.sh
 
-./run/serial.bin -cpu=1 \
-		-buildnumber=42962 \
-		-vmmts="1679863686" \
-		-hostsn="$HOST_SERIAL" \
-		-guestsn="$GUEST_SERIAL" \
-		-vmmversion="2.6.1-12139" \
-		-cpu_arch="QEMU, Virtual CPU, X86_64" \
-		-guestuuid="ba13a19a-c0c1-4fef-9346-915ed3b98341" > /dev/null 2>&1 &
-
-# Stop the webserver
-pkill -f server.sh
+[ -z "${KVM_MON_OPTS}" ] && echo "Error: Failed to setup monitor..." && exit 87
 
 if [ -e /dev/kvm ] && sh -c 'echo -n > /dev/kvm' &> /dev/null; then
-  echo "Booting DSM image..."
-else
-  echo "Error: KVM not available..." && exit 86
+  if [[ $(grep -e vmx -e svm /proc/cpuinfo) ]]; then
+    KVM_ACC_OPTS="-enable-kvm -machine accel=kvm,usb=off -cpu host"
+  fi
 fi
 
-# Configure QEMU for graceful shutdown
+[ -z "${KVM_ACC_OPTS}" ] && echo "WARNING: KVM acceleration is disabled..."
 
-QEMU_MONPORT=7100
-QEMU_POWERDOWN_TIMEOUT=30
-QEMU_IFUP='/run/qemu-ifup'
-QEMU_IFDOWN='/run/qemu-ifdown'
+pkill -f server.sh
 
-_graceful_shutdown() {
+KVM_EXTRA_OPTS="-nographic -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4"
+ARGS="-m ${RAM_SIZE} ${KVM_ACC_OPTS} ${KVM_EXTRA_OPTS} ${KVM_MON_OPTS} ${KVM_SERIAL_OPTS} ${KVM_NET_OPTS} ${KVM_DISK_OPTS}"
 
-  local COUNT=0
-  local QEMU_MONPORT="${QEMU_MONPORT:-7100}"
-  local QEMU_POWERDOWN_TIMEOUT="${QEMU_POWERDOWN_TIMEOUT:-120}"
-
-  set +e
-  echo "Trying to shutdown gracefully.."
-
-  # Send a NMI interrupt which will be detected by the agent
-  echo 'nmi' | nc -q 1 localhost "${QEMU_MONPORT}">/dev/null 2>&1
-  echo 'system_powerdown' | nc -q 1 localhost "${QEMU_MONPORT}">/dev/null 2>&1
-  echo ""
-
-  while echo 'info version'|nc -q 1 localhost "${QEMU_MONPORT:-7100}">/dev/null 2>&1 && [ "${COUNT}" -lt "${QEMU_POWERDOWN_TIMEOUT}" ]; do
-    (( COUNT++ )) || true
-    echo "Shutting down, waiting... (${COUNT}/${QEMU_POWERDOWN_TIMEOUT})"
-    sleep 1
-  done
-
-  if echo 'info version'|nc -q 1 localhost "${QEMU_MONPORT:-7100}">/dev/null 2>&1; then
-    echo "Killing the VM.."
-    echo 'quit' | nc -q 1 localhost "${QEMU_MONPORT}">/dev/null 2>&1 || true
-  fi
-
-  echo "Exiting..."
-}
-
-trap _graceful_shutdown SIGINT SIGTERM SIGHUP
-
-# And run the VM! A brief explaination of the options here:
-# -accel=kvm: use KVM for this VM (much faster for our case).
-# -nographic: disable SDL graphics.
-# -serial mon:stdio: use "monitored stdio" as our serial output.
-
-exec qemu-system-x86_64 -name Synology -m "$RAM_SIZE" -enable-kvm -machine accel=kvm,usb=off -cpu host -nographic \
-    -serial mon:stdio \
-    -monitor telnet:localhost:"${QEMU_MONPORT:-7100}",server,nowait,nodelay \
-    -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 \
-    -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x3 \
-    -chardev pty,id=charserial0 \
-    -device isa-serial,chardev=charserial0,id=serial0 \
-    -chardev socket,id=charchannel0,host=127.0.0.1,port=12345,reconnect=10 \
-    -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=vchannel \
-    -device virtio-net,netdev=tap0 -netdev tap,id=tap0,ifname=Tap,script="$QEMU_IFUP",downscript="$QEMU_IFDOWN" \
-    -device virtio-scsi-pci,id=hw-synoboot,bus=pci.0,addr=0xa \
-    -drive file="$IMG"/"$BASE".boot.img,if=none,id=drive-synoboot,format=raw,cache=none,aio=native,detect-zeroes=on \
-    -device scsi-hd,bus=hw-synoboot.0,channel=0,scsi-id=0,lun=0,drive=drive-synoboot,id=synoboot0,bootindex=1 \
-    -device virtio-scsi-pci,id=hw-synosys,bus=pci.0,addr=0xb \
-    -drive file="$IMG"/"$BASE".system.img,if=none,id=drive-synosys,format=raw,cache=none,aio=native,detect-zeroes=on \
-    -device scsi-hd,bus=hw-synosys.0,channel=0,scsi-id=0,lun=0,drive=drive-synosys,id=synosys0,bootindex=2 \
-    -device virtio-scsi-pci,id=hw-userdata,bus=pci.0,addr=0xc \
-    -drive file="$IMG"/data"$DISK_SIZE".img,if=none,id=drive-userdata,format=raw,cache=none,aio=native,detect-zeroes=on \
-    -device scsi-hd,bus=hw-userdata.0,channel=0,scsi-id=0,lun=0,drive=drive-userdata,id=userdata0,bootindex=3 &
+eval "qemu-system-x86_64 ${ARGS}" &
 
 wait $!