fix: Remove non-printable characters (#949)

readme.md

@@ -60,17 +60,6 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
 [`Click here to launch this container in the cloud!`](https://github.com/codespaces/new?skip_quickstart=true&machine=basicLinux32gb&repo=619260050&ref=master&devcontainer_path=.devcontainer.json)
 
-## Compatibility ⚙️
-
-| **Product**  | **Platform**   | |
-|---|---|---|
-| Docker Engine     | Linux      | ✅ |
-| Docker Desktop    | Linux      | ❌ |
-| Docker Desktop    | macOS      | ❌ |
-| Docker Desktop    | Windows 11 | ✅ |
-| Docker Desktop    | Windows 10 | ❌ |
-| Github Codespaces | Cloud      | ✅ |
-
 ## FAQ 💬
 
 ### How do I use it?
@@ -164,9 +153,16 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
 ### How do I verify if my system supports KVM?
 
-  Only Linux and Windows 11 support KVM virtualization, macOS and Windows 10 do not unfortunately.
+  First check if your software is compatible using this chart:
 
-  You can run the following commands in Linux to check your system:
+  | **Product**  | **Linux** | **Win11** | **Win10** | **macOS** |
+  |---|---|---|---|---|
+  | Docker CLI        | ✅   | ✅       | ❌        | ❌ |
+  | Docker Desktop    | ❌   | ✅       | ❌        | ❌ | 
+  | Podman CLI        | ✅   | ✅       | ❌        | ❌ | 
+  | Podman Desktop    | ✅   | ✅       | ❌        | ❌ | 
+
+  After that you can run the following commands in Linux to check your system:
 
   ```bash
   sudo apt install cpu-checker
@@ -181,11 +177,7 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
   - you are not using a cloud provider, as most of them do not allow nested virtualization for their VPS's.
 
-  If you do not receive any error from `kvm-ok` but the container still complains about KVM, please check whether:
+  If you did not receive any error from `kvm-ok` but the container still complains about a missing KVM device, it could help to add `privileged: true` to your compose file (or `sudo` to your `docker` command) to rule out any permission issue.
-
-  - you are not using "Docker Desktop for Linux" as it does not support KVM, instead make use of Docker Engine directly.
- 
-  - it could help to add `privileged: true` to your compose file (or `sudo` to your `docker run` command), to rule out any permission issue.
 
 ### How do I assign an individual IP address to the container?
 

src/config.sh

@@ -37,7 +37,7 @@ if [[ "$RAM_CHECK" != [Nn]* ]]; then
 fi
 
 if [[ "$DEBUG" == [Yy1]* ]]; then
-  printf "Arguments:\n\n%s" "${ARGS// -/$'\n-'}" && echo
+  printf "Arguments:\n\n%s\n\n" "${ARGS// -/$'\n-'}"
 fi
 
 return 0

src/install.sh

@@ -5,6 +5,7 @@ set -Eeuo pipefail
 
 if [ -f "$STORAGE/dsm.ver" ]; then
   BASE=$(<"$STORAGE/dsm.ver")
+  BASE="${BASE//[![:print:]]/}"
   [ -z "$BASE" ] && BASE="DSM_VirtualDSM_69057"
 else
   # Fallback for old installs

src/network.sh

@@ -104,15 +104,21 @@ configureDHCP() {
 
 configureDNS() {
 
-  # dnsmasq configuration:
-  DNSMASQ_OPTS+=" --dhcp-range=$VM_NET_IP,$VM_NET_IP --dhcp-host=$VM_NET_MAC,,$VM_NET_IP,$VM_NET_HOST,infinite --dhcp-option=option:netmask,255.255.255.0"
-
   # Create lease file for faster resolve
   echo "0 $VM_NET_MAC $VM_NET_IP $VM_NET_HOST 01:$VM_NET_MAC" > /var/lib/misc/dnsmasq.leases
   chmod 644 /var/lib/misc/dnsmasq.leases
 
+  # dnsmasq configuration:
+  DNSMASQ_OPTS+=" --dhcp-authoritative"
+
+  # Set DHCP range and host
+  DNSMASQ_OPTS+=" --dhcp-range=$VM_NET_IP,$VM_NET_IP"
+  DNSMASQ_OPTS+=" --dhcp-host=$VM_NET_MAC,,$VM_NET_IP,$VM_NET_HOST,infinite"
+
   # Set DNS server and gateway
-  DNSMASQ_OPTS+=" --dhcp-option=option:dns-server,${VM_NET_IP%.*}.1 --dhcp-option=option:router,${VM_NET_IP%.*}.1"
+  DNSMASQ_OPTS+=" --dhcp-option=option:netmask,255.255.255.0"
+  DNSMASQ_OPTS+=" --dhcp-option=option:router,${VM_NET_IP%.*}.1"
+  DNSMASQ_OPTS+=" --dhcp-option=option:dns-server,${VM_NET_IP%.*}.1"
 
   # Add DNS entry for container
   DNSMASQ_OPTS+=" --address=/host.lan/${VM_NET_IP%.*}.1"
@@ -193,14 +199,16 @@ configureNAT() {
   fi
 
   if [ ! -c /dev/net/tun ]; then
-    error "$tuntap" && return 1
+    [[ "$PODMAN" != [Yy1]* ]] && error "$tuntap"  
+    return 1
   fi
 
   # Check port forwarding flag
   if [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
     { sysctl -w net.ipv4.ip_forward=1 > /dev/null; rc=$?; } || :
     if (( rc != 0 )) || [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
-      error "IP forwarding is disabled. $ADD_ERR --sysctl net.ipv4.ip_forward=1" && return 1
+      [[ "$PODMAN" != [Yy1]* ]] && error "IP forwarding is disabled. $ADD_ERR --sysctl net.ipv4.ip_forward=1"
+      return 1
     fi
   fi
 
@@ -391,6 +399,7 @@ getInfo() {
   if [ -z "$VM_NET_MAC" ]; then
     local file="$STORAGE/dsm.mac"
     [ -s "$file" ] && VM_NET_MAC=$(<"$file")
+    VM_NET_MAC="${VM_NET_MAC//[![:print:]]/}"
     if [ -z "$VM_NET_MAC" ]; then
       # Generate MAC address based on Docker container ID in hostname
       VM_NET_MAC=$(echo "$HOST" | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:11:32:\3:\4:\5/')
@@ -420,6 +429,7 @@ getInfo() {
     [ -n "$IP6" ] && IP6=$(echo "$IP6" | sed -e's/^.*inet6 \([^ ]*\)\/.*$/\1/;t;d' | head -n 1)
   fi
 
+  [ -f "/run/.containerenv" ] && PODMAN="Y" || PODMAN="N"
   echo "$IP" > /run/shm/qemu.ip
 
   return 0
@@ -489,7 +499,14 @@ else
 
       closeBridge
       NETWORK="user"
-      warn "falling back to user-mode networking! Performance will be bad and port mapping will not work."
+      msg="falling back to user-mode networking!"
+      if [[ "$PODMAN" != [Yy1]* ]]; then
+        msg="an error occured, $msg"
+      else
+        msg="podman detected, $msg"
+      fi
+      warn "$msg"
+      [ -z "$USER_PORTS" ] && info "Notice: port mapping will not work without \"USER_PORTS\" now."
 
     fi
 

src/proc.sh

@@ -10,19 +10,20 @@ set -Eeuo pipefail
 : "${DEF_MODEL:="qemu64"}"
 
 CLOCKSOURCE="tsc"
-[[ "${ARCH,,}" == "arm64" ]] && CLOCKSOURCE="arch_sys_counter"
+[[ "${ARCH,,}" == "arm64" ]] && CLOCKSOURCE="arch_sys_counter"
 CLOCK="/sys/devices/system/clocksource/clocksource0/current_clocksource"
 
 if [ ! -f "$CLOCK" ]; then
   warn "file \"$CLOCK\" cannot not found?"
 else
   result=$(<"$CLOCK")
+  result="${result//[![:print:]]/}"
   case "${result,,}" in
     "${CLOCKSOURCE,,}" ) ;;
     "kvm-clock" ) info "Nested KVM virtualization detected.." ;;
     "hyperv_clocksource_tsc_page" ) info "Nested Hyper-V virtualization detected.." ;;
-    "hpet" ) warn "unsupported clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'" ;;
+    "hpet" ) warn "unsupported clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'." ;;
-    *) warn "unexpected clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'" ;;
+    *) warn "unexpected clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'." ;;
   esac
 fi