.devcontainer.json

@@ -1,6 +0,0 @@
-{
-  "name": "dsm",
-  "service": "dsm",
-  "forwardPorts": [5000],
-  "dockerComposeFile": "compose.yml"
-}

.github/ISSUE_TEMPLATE/1-issue.yml

@@ -21,7 +21,6 @@ body:
     attributes:
       label: Docker compose
       description: The compose file (or otherwise the `docker run` command used).
-      render: yaml
     validations:
       required: true
   - type: textarea
@@ -29,7 +28,6 @@ body:
     attributes:
       label: Docker log
       description: The logfile of the container (as shown by `docker logs dsm`).
-      render: shell
     validations:
       required: true
   - type: textarea

.github/ISSUE_TEMPLATE/3-bug.yml

@@ -23,7 +23,6 @@ body:
     attributes:
       label: Docker compose
       description: The compose file (or otherwise the `docker run` command used).
-      render: yaml
     validations:
       required: true
   - type: textarea
@@ -31,7 +30,6 @@ body:
     attributes:
       label: Docker log
       description: The logfile of the container (as shown by `docker logs dsm`).
-      render: shell
     validations:
       required: true
   - type: textarea

.github/workflows/check.yml

@@ -20,5 +20,5 @@ jobs:
         uses: hadolint/hadolint-action@v3.1.0
         with:
           dockerfile: Dockerfile
-          ignore: DL3008,DL3003,DL3006,DL3013
+          ignore: DL3008,DL3003,DL3006
           failure-threshold: warning

Dockerfile

@@ -15,21 +15,19 @@ ARG DEBCONF_NOWARNINGS="yes"
 ARG DEBIAN_FRONTEND="noninteractive"
 ARG DEBCONF_NONINTERACTIVE_SEEN="true"
 
-RUN set -eu && \
+RUN set -eu && extra="" && \
+    if [ "$TARGETPLATFORM" != "linux/amd64" ]; then extra="qemu-user"; fi && \
     apt-get update && \
     apt-get --no-install-recommends -y install \
         jq \
         tini \
         curl \
+        cpio \
         wget \
         fdisk \
         unzip \
         nginx \
         procps \
-        python3 \
-        python3-pip \
-        python3-msgpack \
-        python3-pysodium \
         xz-utils \
         iptables \
         iproute2 \
@@ -42,9 +40,9 @@ RUN set -eu && \
         iputils-ping \
         ca-certificates \
         netcat-openbsd \
-        qemu-system-x86 && \
+        qemu-system-x86 \
+        "$extra" && \
     apt-get clean && \
-    pip3 install --no-cache-dir --break-system-packages --root-user-action=ignore dissect.cstruct && \
     mkdir -p /etc/qemu && \
     echo "allow br0" > /etc/qemu/bridge.conf && \
     unlink /etc/nginx/sites-enabled/default && \
@@ -56,14 +54,13 @@ COPY --chmod=755 ./src /run/
 COPY --chmod=755 ./web /var/www/
 COPY --chmod=755 --from=builder /qemu-host.bin /run/host.bin
 COPY --chmod=744 ./web/conf/nginx.conf /etc/nginx/sites-enabled/web.conf
-ADD --chmod=775 https://raw.githubusercontent.com/sud0woodo/patology/refs/heads/main/patology.py /run/extract.py
 
 VOLUME /storage
 EXPOSE 22 139 445 5000
 
-ENV RAM_SIZE="2G"
+ENV RAM_SIZE="1G"
-ENV CPU_CORES="2"
 ENV DISK_SIZE="16G"
+ENV CPU_CORES="1"
 
 HEALTHCHECK --interval=60s --start-period=45s --retries=2 CMD /run/check.sh
 

readme.md

@@ -22,7 +22,7 @@ Virtual DSM in a Docker container.
  
 ## Usage  🐳
 
-##### Via Docker Compose:
+Via Docker Compose:
 
 ```yaml
 services:
@@ -44,21 +44,27 @@ services:
     stop_grace_period: 2m
 ```
 
-##### Via Docker CLI:
+Via Docker CLI:
 
 ```bash
-docker run -it --rm --name dsm -p 5000:5000 --device=/dev/kvm --device=/dev/net/tun --cap-add NET_ADMIN -v "${PWD:-.}/dsm:/storage" --stop-timeout 120 vdsm/virtual-dsm
+docker run -it --rm --name dsm -p 5000:5000 --device=/dev/kvm --device=/dev/net/tun --cap-add NET_ADMIN -v ${PWD:-.}/dsm:/storage --stop-timeout 120 vdsm/virtual-dsm
 ```
 
-##### Via Kubernetes:
+Via Kubernetes:
 
 ```shell
 kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/master/kubernetes.yml
 ```
 
-##### Via Github Codespaces:
+## Compatibility ⚙️
 
-[![Open in GitHub Codespaces](https://github.com/codespaces/badge.svg)](https://codespaces.new/vdsm/virtual-dsm)
+| **Product**  | **Platform**   | |
+|---|---|---|
+| Docker Engine | Linux| ✅ |
+| Docker Desktop | Linux | ❌ |
+| Docker Desktop | macOS | ❌ |
+| Docker Desktop | Windows 11 | ✅ |
+| Docker Desktop | Windows 10 | ❌ |
 
 ## FAQ 💬
 
@@ -123,19 +129,25 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
 ### How do I pass-through a disk?
 
-   It is possible to pass-through disk devices or partitions directly by adding them to your compose file in this way:
+   It is possible to pass-through a disk device directly, which can be useful when your host is a virtual machine, as it removes an extra layer and allows for easier management. For use with physical disks this method provides little advantage and is not recommended.
+   
+   You can add the virtual device to your compose file like this:
 
   ```yaml
   devices:
-    - /dev/sdb:/disk1
+    - /dev/disk/by-uuid/12345-12345-12345-12345-12345:/disk2
-    - /dev/sdc1:/disk2
   ```
 
-  Make sure it is totally empty (without any filesystem), otherwise DSM may not format it as a volume.
+  The device needs to be totally empty (without any partition table) otherwise DSM does not always format it into a volume.
+  
+  Make sure to bind the disk via its UUID (obtainable via `lsblk -o name,uuid`) instead of its name (`/dev/sdc`), to prevent ever binding the wrong disk when the drive letters happen to change. 
+ 
+> [!CAUTION]
+> Do NOT use this feature with the goal of sharing files from the host, they might all get lost without warning when DSM creates the volume.
 
 ### How do I change the amount of CPU or RAM?
 
-  By default, the container will be allowed to use a maximum of 2 CPU cores and 2 GB of RAM.
+  By default, the container will be allowed to use a maximum of 1 CPU core and 1 GB of RAM.
 
   If you want to adjust this, you can specify the desired amount using the following environment variables:
 
@@ -147,16 +159,9 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
 ### How do I verify if my system supports KVM?
 
-  First check if your software is compatible using this chart:
+  Only Linux and Windows 11 support KVM virtualization, macOS and Windows 10 do not unfortunately.
   
-  | **Product**  | **Linux** | **Win11** | **Win10** | **macOS** |
+  You can run the following commands in Linux to check your system:
-  |---|---|---|---|---|
-  | Docker CLI        | ✅   | ✅       | ❌        | ❌ |
-  | Docker Desktop    | ❌   | ✅       | ❌        | ❌ | 
-  | Podman CLI        | ✅   | ✅       | ❌        | ❌ | 
-  | Podman Desktop    | ✅   | ✅       | ❌        | ❌ | 
-
-  After that you can run the following commands in Linux to check your system:
 
   ```bash
   sudo apt install cpu-checker
@@ -171,7 +176,11 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
   - you are not using a cloud provider, as most of them do not allow nested virtualization for their VPS's.
 
-  If you did not receive any error from `kvm-ok` but the container still complains about a missing KVM device, it could help to add `privileged: true` to your compose file (or `sudo` to your `docker` command) to rule out any permission issue.
+  If you do not receive any error from `kvm-ok` but the container still complains about KVM, please check whether:
+
+  - you are not using "Docker Desktop for Linux" as it does not support KVM, instead make use of Docker Engine directly.
+ 
+  - it could help to add `privileged: true` to your compose file (or `sudo` to your `docker run` command), to rule out any permission issue.
 
 ### How do I assign an individual IP address to the container?
 
@@ -250,14 +259,14 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
   With this method, it is even possible to switch back and forth between versions while keeping your file data intact.
 
-  Alternatively, you can also skip the download and use a local file instead, by binding it in your compose file in this way:
+  If you don't have internet access, it's also possible to skip the download by setting `URL` to:
 
   ```yaml
-  volumes:
+  environment:
-    - ./DSM_VirtualDSM_42218.pat:/boot.pat
+    URL: "DSM_VirtualDSM_42218.pat"
   ```
 
-  Replace the example path `./DSM_VirtualDSM_42218.pat` with the filename of your desired `.pat` file. The value of `URL` will be ignored in this case.
+  after placing a copy of [DSM_VirtualDSM_42218.pat](https://global.synologydownload.com/download/DSM/release/7.0.1/42218/DSM_VirtualDSM_42218.pat) in the root of your `/storage` folder.
 
 ### What are the differences compared to the standard DSM?
 

src/config.sh

@@ -37,7 +37,7 @@ if [[ "$RAM_CHECK" != [Nn]* ]]; then
 fi
 
 if [[ "$DEBUG" == [Yy1]* ]]; then
-  printf "Arguments:\n\n%s\n\n" "${ARGS// -/$'\n-'}"
+  printf "Arguments:\n\n%s" "${ARGS// -/$'\n-'}" && echo
 fi
 
 return 0

src/disk.sh

@@ -320,7 +320,7 @@ convertDisk() {
 
   msg="Conversion of $DISK_DESC"
   html "$msg completed..."
-  info "$msg to $DST_FMT completed successfully!"
+  info "$msg to $DST_FMT completed succesfully!"
 
   return 0
 }
@@ -368,8 +368,6 @@ createDevice () {
   local DISK_FMT=$5
   local DISK_IO=$6
   local DISK_CACHE=$7
-  local DISK_SERIAL=$8
-  local DISK_SECTORS=$9
   local DISK_ID="data$DISK_INDEX"
 
   local index=""
@@ -383,29 +381,29 @@ createDevice () {
       ;;
     "usb" )
       result+=",if=none \
-      -device usb-storage,drive=${DISK_ID}${index}${DISK_SERIAL}${DISK_SECTORS}"
+      -device usb-storage,drive=${DISK_ID}${index}"
       echo "$result"
       ;;
     "nvme" )
       result+=",if=none \
-      -device nvme,drive=${DISK_ID}${index},serial=deadbeaf${DISK_INDEX}${DISK_SERIAL}${DISK_SECTORS}"
+      -device nvme,drive=${DISK_ID}${index},serial=deadbeaf${DISK_INDEX}"
       echo "$result"
       ;;
     "ide" | "sata" )
       result+=",if=none \
       -device ich9-ahci,id=ahci${DISK_INDEX},addr=$DISK_ADDRESS \
-      -device ide-hd,drive=${DISK_ID},bus=ahci$DISK_INDEX.0,rotation_rate=$DISK_ROTATION${index}${DISK_SERIAL}${DISK_SECTORS}"
+      -device ide-hd,drive=${DISK_ID},bus=ahci$DISK_INDEX.0,rotation_rate=$DISK_ROTATION${index}"
       echo "$result"
       ;;
     "blk" | "virtio-blk" )
       result+=",if=none \
-      -device virtio-blk-pci,drive=${DISK_ID},bus=pcie.0,addr=$DISK_ADDRESS,iothread=io2${index}${DISK_SERIAL}${DISK_SECTORS}"
+      -device virtio-blk-pci,drive=${DISK_ID},bus=pcie.0,addr=$DISK_ADDRESS,iothread=io2${index}"
       echo "$result"
       ;;
     "scsi" | "virtio-scsi" )
       result+=",if=none \
       -device virtio-scsi-pci,id=${DISK_ID}b,bus=pcie.0,addr=$DISK_ADDRESS,iothread=io2 \
-      -device scsi-hd,drive=${DISK_ID},bus=${DISK_ID}b.0,channel=0,scsi-id=0,lun=0,rotation_rate=$DISK_ROTATION${index}${DISK_SERIAL}${DISK_SECTORS}"
+      -device scsi-hd,drive=${DISK_ID},bus=${DISK_ID}b.0,channel=0,scsi-id=0,lun=0,rotation_rate=$DISK_ROTATION${index}"
       echo "$result"
       ;;
   esac
@@ -484,7 +482,7 @@ addDisk () {
 
   fi
 
-  DISK_OPTS+=$(createDevice "$DISK_FILE" "$DISK_TYPE" "$DISK_INDEX" "$DISK_ADDRESS" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE" "" "")
+  DISK_OPTS+=$(createDevice "$DISK_FILE" "$DISK_TYPE" "$DISK_INDEX" "$DISK_ADDRESS" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE")
 
   return 0
 }
@@ -499,26 +497,7 @@ addDevice () {
   [ -z "$DISK_DEV" ] && return 0
   [ ! -b "$DISK_DEV" ] && error "Device $DISK_DEV cannot be found! Please add it to the 'devices' section of your compose file." && exit 55
 
-  local sectors=""
+  DISK_OPTS+=$(createDevice "$DISK_DEV" "$DISK_TYPE" "$DISK_INDEX" "$DISK_ADDRESS" "raw" "$DISK_IO" "$DISK_CACHE")
-  local result logical physical
-  result=$(fdisk -l "$DISK_DEV" | grep -m 1 -o "(logical/physical): .*" | cut -c 21-)
-  logical="${result%% *}"
-  physical=$(echo "$result" | grep -m 1 -o "/ .*" | cut -c 3-)
-  physical="${physical%% *}"
-
-  if [ -n "$physical" ]; then
-    if [[ "$physical" == "512" ]] || [[ "$physical" == "4096" ]]; then
-      if [[ "$physical" == "4096" ]]; then
-        sectors=",logical_block_size=$logical,physical_block_size=$physical"
-      fi
-    else
-      warn "Unknown physical sector size: $physical for $DISK_DEV"
-    fi
-  else
-    warn "Failed to determine the sector size for $DISK_DEV"
-  fi
-
-  DISK_OPTS+=$(createDevice "$DISK_DEV" "$DISK_TYPE" "$DISK_INDEX" "$DISK_ADDRESS" "raw" "$DISK_IO" "$DISK_CACHE" "" "$sectors")
 
   return 0
 }
@@ -550,8 +529,8 @@ else
   DISK_ALLOC="preallocation=falloc"
 fi
 
-DISK_OPTS+=$(createDevice "$BOOT" "$DISK_TYPE" "1" "0xa" "raw" "$DISK_IO" "$DISK_CACHE" "" "")
+DISK_OPTS+=$(createDevice "$BOOT" "$DISK_TYPE" "1" "0xa" "raw" "$DISK_IO" "$DISK_CACHE")
-DISK_OPTS+=$(createDevice "$SYSTEM" "$DISK_TYPE" "2" "0xb" "raw" "$DISK_IO" "$DISK_CACHE" "" "")
+DISK_OPTS+=$(createDevice "$SYSTEM" "$DISK_TYPE" "2" "0xb" "raw" "$DISK_IO" "$DISK_CACHE")
 
 DISK1_FILE="$STORAGE/${DISK_NAME}"
 if [[ ! -f "$DISK1_FILE.img" ]] && [[ -f "$STORAGE/data${DISK_SIZE}.img" ]]; then

src/display.sh

@@ -8,9 +8,7 @@ set -Eeuo pipefail
 : "${DISPLAY:="none"}"  # Display type
 : "${RENDERNODE:="/dev/dri/renderD128"}"  # Render node
 
-CPU_VENDOR=$(lscpu | awk '/Vendor ID/{print $3}')
+if [[ "$GPU" != [Yy1]* ]] || [[ "$ARCH" != "amd64" ]]; then
-
-if [[ "$GPU" != [Yy1]* ]] || [[ "$CPU_VENDOR" != "GenuineIntel" ]] || [[ "$ARCH" != "amd64" ]]; then
 
   [[ "${DISPLAY,,}" == "none" ]] && VGA="none"
   DISPLAY_OPTS="-display $DISPLAY -vga $VGA"

src/entry.sh

@@ -6,7 +6,6 @@ set -Eeuo pipefail
 
 cd /run
 
-. utils.sh      # Load functions
 . reset.sh      # Initialize system
 . install.sh    # Run installation
 . disk.sh       # Initialize disks

src/install.sh

@@ -5,38 +5,25 @@ set -Eeuo pipefail
 
 if [ -f "$STORAGE/dsm.ver" ]; then
   BASE=$(<"$STORAGE/dsm.ver")
-  BASE="${BASE//[![:print:]]/}"
   [ -z "$BASE" ] && BASE="DSM_VirtualDSM_69057"
 else
   # Fallback for old installs
   BASE="DSM_VirtualDSM_42962"
 fi
 
-FN="boot.pat"
+if [ -n "$URL" ]; then
-DIR=$(find / -maxdepth 1 -type d -iname "$FN" -print -quit)
-[ ! -d "$DIR" ] && DIR=$(find "$STORAGE" -maxdepth 1 -type d -iname "$FN" -print -quit)
-
-if [ -d "$DIR" ]; then
-  BASE="DSM_VirtualDSM" && URL="file://$DIR" 
-  if [[ ! -s "$STORAGE/$BASE.boot.img" ]] || [[ ! -s "$STORAGE/$BASE.system.img" ]]; then
-    error "The bind $DIR maps to a file that does not exist!" && exit 65
-  fi
-fi
-
-FILE=$(find / -maxdepth 1 -type f -iname "$FN" -print -quit)
-[ ! -s "$FILE" ] && FILE=$(find "$STORAGE" -maxdepth 1 -type f -iname "$FN" -print -quit)
-[ -s "$FILE" ] && BASE="DSM_VirtualDSM" && URL="file://$FILE" 
-
-if [ -n "$URL" ] && [ ! -s "$FILE" ] && [ ! -d "$DIR" ]; then
   BASE=$(basename "$URL" .pat)
   if [ ! -s "$STORAGE/$BASE.system.img" ]; then
     BASE=$(basename "${URL%%\?*}" .pat)
     : "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
     BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
   fi
-  if [[ "${URL,,}" != "http"* ]] && [[ "${URL,,}" != "file:"* ]] ; then
+  if [[ "${URL,,}" != "http"* ]]; then
-    [ ! -s "$STORAGE/$BASE.pat" ] && error "Invalid URL:  $URL" && exit 65
+    if [ -s "$STORAGE/$BASE.pat" ]; then
       URL="file://$STORAGE/$BASE.pat"
+    else
+      error "File $STORAGE/$BASE.pat does not exist!" && exit 65
+    fi
   fi
 fi
 
@@ -59,15 +46,11 @@ if [ -z "$DL" ]; then
   [[ "${COUNTRY^^}" == "CN" ]] && DL="$DL_CHINA" || DL="$DL_GLOBAL"
 fi
 
-if [ -z "$URL" ]; then
+[ -z "$URL" ] && URL="$DL/release/7.2.2/72806/DSM_VirtualDSM_72806.pat"
-  URL="$DL/release/7.2.2/72806/DSM_VirtualDSM_72806.pat"
-fi
 
-if [ ! -s "$FILE" ]; then
+BASE=$(basename "${URL%%\?*}" .pat)
-  BASE=$(basename "${URL%%\?*}" .pat)
+: "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
-  : "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
+BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
-  BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
-fi
 
 if [[ "$URL" != "file://$STORAGE/$BASE.pat" ]]; then
   rm -f "$STORAGE/$BASE.pat"
@@ -128,16 +111,128 @@ else
   PROGRESS="--progress=dot:giga"
 fi
 
-if [[ "$URL" == "file://"* ]]; then
+# Download the required files from the Synology website
-  MSG="Copying DSM"
+
-  ERR="Failed to copy ${URL:7}"
+ROOT="Y"
-  info "Install: Copying installation image..."
+RD="$TMP/rd.gz"
-else
+RDC="$STORAGE/dsm.rd"
-  MSG="Downloading DSM"
+
-  ERR="Failed to download $URL"
+if [ ! -s "$RDC" ] && [[ "$URL" == "file://"* ]] && [[ "${URL,,}" == *"_42218.pat" ]]; then
-  info "Install: Downloading $BASE.pat..."
+
+  rm -f "$RD"
+  rm -f "$RDC"
+
+  tar --extract --file="${URL:7}" --directory="$(dirname "$RD")"/. "$(basename "$RD")"
+  cp "$RD" "$RDC"
+
 fi
 
+if [ ! -s "$RDC" ]; then
+
+  rm -f "$RD"
+  rm -f "$RDC"
+
+  MSG="Downloading installer"
+  info "Install: $MSG..." && html "$MSG..."
+
+  SIZE=5394188
+  POS="65627648-71021835"
+  VERIFY="b4215a4b213ff5154db0488f92c87864"
+  LOC="$DL/release/7.0.1/42218/DSM_VirtualDSM_42218.pat"
+  [[ "${URL,,}" == *"_42218.pat" ]] && LOC="$URL"
+
+  /run/progress.sh "$RD" "$SIZE" "$MSG ([P])..." &
+  { curl -r "$POS" -sfk --connect-timeout 10 -S -o "$RD" "$LOC"; rc=$?; } || :
+
+  fKill "progress.sh"
+
+  ERR="Failed to download $LOC"
+  (( rc == 3 )) && error "$ERR , cannot write file (disk full?)" && exit 60
+  (( rc == 4 )) && error "$ERR , network failure!" && exit 60
+  (( rc == 8 )) && error "$ERR , server issued an error response!" && exit 60
+
+  if (( rc != 0 )); then
+    if (( rc != 22 )) && (( rc != 56 )); then
+      error "$ERR , reason: $rc" && exit 60
+    fi
+    SUM="skip"
+  else
+    SUM=$(md5sum "$RD" | cut -f 1 -d " ")
+  fi
+
+  if [ "$SUM" != "$VERIFY" ]; then
+
+    PAT="/install.pat"
+    SIZE=379637760
+
+    rm -f "$RD"
+    rm -f "$PAT"
+
+    html "$MSG..."
+    /run/progress.sh "$PAT" "$SIZE" "$MSG ([P])..." &
+    { wget "$LOC" -O "$PAT" -q --no-check-certificate --timeout=10 --no-http-keep-alive --show-progress "$PROGRESS"; rc=$?; } || :
+
+    fKill "progress.sh"
+
+    ERR="Failed to download $LOC"
+    (( rc == 3 )) && error "$ERR , cannot write file (disk full?)" && exit 60
+    (( rc == 4 )) && error "$ERR , network failure!" && exit 60
+    (( rc == 8 )) && error "$ERR , server issued an error response!" && exit 60
+    (( rc != 0 )) && error "$ERR , reason: $rc" && exit 60
+
+    tar --extract --file="$PAT" --directory="$(dirname "$RD")"/. "$(basename "$RD")"
+    rm "$PAT"
+
+  fi
+
+  cp "$RD" "$RDC"
+
+fi
+
+if [ -f "$RDC" ]; then
+
+  { xz -dc <"$RDC" >"$TMP/rd" 2>/dev/null; rc=$?; } || :
+  (( rc != 1 )) && error "Failed to unxz $RDC on $FS, reason $rc" && exit 91
+
+  { (cd "$TMP" && cpio -idm <"$TMP/rd" 2>/dev/null); rc=$?; } || :
+
+  if (( rc != 0 )); then
+    ROOT="N"
+    { (cd "$TMP" && fakeroot cpio -idmu <"$TMP/rd" 2>/dev/null); rc=$?; } || :
+    (( rc != 0 )) && error "Failed to extract $RDC on $FS, reason $rc" && exit 92
+  fi
+
+  rm -rf /run/extract && mkdir -p /run/extract
+  for file in $TMP/usr/lib/libcurl.so.4 \
+              $TMP/usr/lib/libmbedcrypto.so.5 \
+              $TMP/usr/lib/libmbedtls.so.13 \
+              $TMP/usr/lib/libmbedx509.so.1 \
+              $TMP/usr/lib/libmsgpackc.so.2 \
+              $TMP/usr/lib/libsodium.so \
+              $TMP/usr/lib/libsynocodesign-ng-virtual-junior-wins.so.7 \
+              $TMP/usr/syno/bin/scemd; do
+    cp "$file" /run/extract/
+  done
+
+  if [ "$ARCH" != "amd64" ]; then
+    mkdir -p /lib64/
+    cp "$TMP/usr/lib/libc.so.6" /lib64/
+    cp "$TMP/usr/lib/libpthread.so.0" /lib64/
+    cp "$TMP/usr/lib/ld-linux-x86-64.so.2" /lib64/
+  fi
+
+  mv /run/extract/scemd /run/extract/syno_extract_system_patch
+  chmod +x /run/extract/syno_extract_system_patch
+
+fi
+
+rm -rf "$TMP" && mkdir -p "$TMP"
+
+info "Install: Downloading $BASE.pat..."
+
+MSG="Downloading DSM"
+ERR="Failed to download $URL"
+
 html "$MSG..."
 
 PAT="/$BASE.pat"
@@ -145,10 +240,6 @@ rm -f "$PAT"
 
 if [[ "$URL" == "file://"* ]]; then
 
-  if [ ! -f "${URL:7}" ]; then
-    error "File '${URL:7}' does not exist!" && exit 65
-  fi
-
   cp "${URL:7}" "$PAT"
 
 else
@@ -179,7 +270,7 @@ if ((SIZE<250000000)); then
   error "The specified PAT file is probably an update pack as it's too small." && exit 62
 fi
 
-MSG="Extracting installation image..."
+MSG="Extracting downloaded image..."
 info "Install: $MSG" && html "$MSG"
 
 if { tar tf "$PAT"; } >/dev/null 2>&1; then
@@ -188,15 +279,22 @@ if { tar tf "$PAT"; } >/dev/null 2>&1; then
 
 else
 
-  { (cd "$TMP" && python3 /run/extract.py -i "$PAT" -d 2>/run/extract.log); rc=$?; } || :
+  export LD_LIBRARY_PATH="/run/extract"
 
-  if (( rc != 0 )); then
+  if [ "$ARCH" == "amd64" ]; then
-    cat /run/extract.log
+    { /run/extract/syno_extract_system_patch "$PAT" "$TMP/."; rc=$?; } || :
-    error "Failed to extract PAT file, reason $rc" && exit 63
+  else
+    { qemu-x86_64 /run/extract/syno_extract_system_patch "$PAT" "$TMP/."; rc=$?; } || :
   fi
 
+  export LD_LIBRARY_PATH=""
+
+  (( rc != 0 )) && error "Failed to extract PAT file, reason $rc" && exit 63
+
 fi
 
+rm -rf /run/extract
+
 MSG="Preparing system partition..."
 info "Install: $MSG" && html "$MSG"
 
@@ -270,9 +368,12 @@ mv "$HDA.tgz" "$HDA.txz"
 [ -d "$PKG" ] && mv "$PKG/" "$MOUNT/.SynoUpgradePackages/"
 rm -f "$MOUNT/.SynoUpgradePackages/ActiveInsight-"*
 
+[ -s "$HDP.txz" ] && tar xpfJ "$HDP.txz" --absolute-names -C "$MOUNT/"
+
 if [ -s "$IDB.txz" ]; then
-  INDEX_DB="$MOUNT/usr/syno/synoman/indexdb"
+  INDEX_DB="$MOUNT/usr/syno/synoman/indexdb/"
   mkdir -p "$INDEX_DB"
+  tar xpfJ "$IDB.txz" --absolute-names -C "$INDEX_DB"
 fi
 
 LABEL="1.44.1-42218"
@@ -280,13 +381,23 @@ OFFSET="1048576"    # 2048 * 512
 NUMBLOCKS="2097152" # (16777216 * 512) / 4096
 MSG="Installing system partition..."
 
-fakeroot -- bash -c "set -Eeu;\
+if [[ "$ROOT" != [Nn]* ]]; then
-  [ -s $HDP.txz ] && tar xpfJ $HDP.txz --absolute-names -C $MOUNT/;\
+
-  [ -s $IDB.txz ] && tar xpfJ $IDB.txz --absolute-names -C $INDEX_DB/;\
+  tar xpfJ "$HDA.txz" --absolute-names --skip-old-files -C "$MOUNT/"
+
+  info "Install: $MSG" && html "$MSG"
+
+  mke2fs -q -t ext4 -b 4096 -d "$MOUNT/" -L "$LABEL" -F -E "offset=$OFFSET" "$SYSTEM" "$NUMBLOCKS"
+
+else
+
+  fakeroot -- bash -c "set -Eeu;\
         tar xpfJ $HDA.txz --absolute-names --skip-old-files -C $MOUNT/;\
         printf '%b%s%b' '\E[1;34m❯ \E[1;36m' 'Install: $MSG' '\E[0m\n';\
         mke2fs -q -t ext4 -b 4096 -d $MOUNT/ -L $LABEL -F -E offset=$OFFSET $SYSTEM $NUMBLOCKS"
 
+fi
+
 rm -rf "$MOUNT"
 echo "$BASE" > "$STORAGE/dsm.ver"
 

src/network.sh

@@ -104,21 +104,15 @@ configureDHCP() {
 
 configureDNS() {
 
+  # dnsmasq configuration:
+  DNSMASQ_OPTS+=" --dhcp-range=$VM_NET_IP,$VM_NET_IP --dhcp-host=$VM_NET_MAC,,$VM_NET_IP,$VM_NET_HOST,infinite --dhcp-option=option:netmask,255.255.255.0"
+
   # Create lease file for faster resolve
   echo "0 $VM_NET_MAC $VM_NET_IP $VM_NET_HOST 01:$VM_NET_MAC" > /var/lib/misc/dnsmasq.leases
   chmod 644 /var/lib/misc/dnsmasq.leases
 
-  # dnsmasq configuration:
-  DNSMASQ_OPTS+=" --dhcp-authoritative"
-
-  # Set DHCP range and host
-  DNSMASQ_OPTS+=" --dhcp-range=$VM_NET_IP,$VM_NET_IP"
-  DNSMASQ_OPTS+=" --dhcp-host=$VM_NET_MAC,,$VM_NET_IP,$VM_NET_HOST,infinite"
-
   # Set DNS server and gateway
-  DNSMASQ_OPTS+=" --dhcp-option=option:netmask,255.255.255.0"
+  DNSMASQ_OPTS+=" --dhcp-option=option:dns-server,${VM_NET_IP%.*}.1 --dhcp-option=option:router,${VM_NET_IP%.*}.1"
-  DNSMASQ_OPTS+=" --dhcp-option=option:router,${VM_NET_IP%.*}.1"
-  DNSMASQ_OPTS+=" --dhcp-option=option:dns-server,${VM_NET_IP%.*}.1"
 
   # Add DNS entry for container
   DNSMASQ_OPTS+=" --address=/host.lan/${VM_NET_IP%.*}.1"
@@ -176,11 +170,7 @@ getHostPorts() {
 
 configureUser() {
 
-  if [ -z "$IP6" ]; then
   NET_OPTS="-netdev user,id=hostnet0,host=${VM_NET_IP%.*}.1,net=${VM_NET_IP%.*}.0/24,dhcpstart=$VM_NET_IP,hostname=$VM_NET_HOST"
-  else
-    NET_OPTS="-netdev user,id=hostnet0,ipv4=on,host=${VM_NET_IP%.*}.1,net=${VM_NET_IP%.*}.0/24,dhcpstart=$VM_NET_IP,ipv6=on,hostname=$VM_NET_HOST"
-  fi
 
   local forward
   forward=$(getUserPorts "$USER_PORTS")
@@ -196,7 +186,6 @@ configureNAT() {
 
   # Create the necessary file structure for /dev/net/tun
   if [ ! -c /dev/net/tun ]; then
-    [[ "$PODMAN" == [Yy1]* ]] && return 1
     [ ! -d /dev/net ] && mkdir -m 755 /dev/net
     if mknod /dev/net/tun c 10 200; then
       chmod 666 /dev/net/tun
@@ -209,11 +198,9 @@ configureNAT() {
 
   # Check port forwarding flag
   if [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
-    { sysctl -w net.ipv4.ip_forward=1 > /dev/null 2>&1; rc=$?; } || :
+    { sysctl -w net.ipv4.ip_forward=1 > /dev/null; rc=$?; } || :
     if (( rc != 0 )) || [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
-      [[ "$PODMAN" == [Yy1]* ]] && return 1
+      error "IP forwarding is disabled. $ADD_ERR --sysctl net.ipv4.ip_forward=1" && return 1
-      error "IP forwarding is disabled. $ADD_ERR --sysctl net.ipv4.ip_forward=1"
-      return 1
     fi
   fi
 
@@ -343,17 +330,17 @@ closeNetwork() {
 
 checkOS() {
 
-  local kernel
+  local name
   local os=""
   local if="macvlan"
-  kernel=$(uname -a)
+  name=$(uname -a)
 
-  [[ "${kernel,,}" == *"darwin"* ]] && os="Docker Desktop for macOS"
+  [[ "${name,,}" == *"darwin"* ]] && os="Docker Desktop for macOS"
-  [[ "${kernel,,}" == *"microsoft"* ]] && os="Docker Desktop for Windows"
+  [[ "${name,,}" == *"microsoft"* ]] && os="Docker Desktop for Windows"
 
   if [[ "$DHCP" == [Yy1]* ]]; then
     if="macvtap"
-    [[ "${kernel,,}" == *"synology"* ]] && os="Synology Container Manager"
+    [[ "${name,,}" == *"synology"* ]] && os="Synology Container Manager"
   fi
 
   if [ -n "$os" ]; then
@@ -378,13 +365,7 @@ getInfo() {
 
   if [ ! -d "/sys/class/net/$VM_NET_DEV" ]; then
     error "Network interface '$VM_NET_DEV' does not exist inside the container!"
-    error "$ADD_ERR -e \"VM_NET_DEV=NAME\" to specify another interface name." && exit 26
+    error "$ADD_ERR -e \"VM_NET_DEV=NAME\" to specify another interface name." && exit 27
-  fi
-
-  BASE_IP="${VM_NET_IP%.*}."
-
-  if [ "${VM_NET_IP/$BASE_IP/}" -lt "3" ]; then
-    error "Invalid VM_NET_IP, must end in a higher number than .3" && exit 27
   fi
 
   if [ -z "$MTU" ]; then
@@ -404,7 +385,6 @@ getInfo() {
   if [ -z "$VM_NET_MAC" ]; then
     local file="$STORAGE/dsm.mac"
     [ -s "$file" ] && VM_NET_MAC=$(<"$file")
-    VM_NET_MAC="${VM_NET_MAC//[![:print:]]/}"
     if [ -z "$VM_NET_MAC" ]; then
       # Generate MAC address based on Docker container ID in hostname
       VM_NET_MAC=$(echo "$HOST" | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:11:32:\3:\4:\5/')
@@ -434,7 +414,6 @@ getInfo() {
     [ -n "$IP6" ] && IP6=$(echo "$IP6" | sed -e's/^.*inet6 \([^ ]*\)\/.*$/\1/;t;d' | head -n 1)
   fi
 
-  [ -f "/run/.containerenv" ] && PODMAN="Y" || PODMAN="N"
   echo "$IP" > /run/shm/qemu.ip
 
   return 0
@@ -457,10 +436,7 @@ if [[ "$DEBUG" == [Yy1]* ]]; then
   line="Host: $HOST  IP: $IP  Gateway: $GATEWAY  Interface: $VM_NET_DEV  MAC: $VM_NET_MAC  MTU: $mtu"
   [[ "$MTU" != "0" ]] && [[ "$MTU" != "$mtu" ]] && line+=" ($MTU)"
   info "$line"
-  if [ -f /etc/resolv.conf ]; then
+  [ -f /etc/resolv.conf ] && grep '^nameserver*' /etc/resolv.conf
-    nameservers=$(grep '^nameserver*' /etc/resolv.conf | head -c -1 | sed 's/nameserver //g;' | sed -z 's/\n/, /g')
-    [ -n "$nameservers" ] && info "Nameservers: $nameservers"
-  fi
   echo
 fi
 
@@ -504,14 +480,7 @@ else
 
       closeBridge
       NETWORK="user"
-      msg="falling back to user-mode networking!"
+      warn "falling back to user-mode networking! Performance will be bad and port mapping will not work."
-      if [[ "$PODMAN" != [Yy1]* ]]; then
-        msg="an error occured, $msg"
-      else
-        msg="podman detected, $msg"
-      fi
-      warn "$msg"
-      [ -z "$USER_PORTS" ] && info "Notice: port mapping will not work without \"USER_PORTS\" now."
 
     fi
 

src/proc.sh

@@ -10,20 +10,19 @@ set -Eeuo pipefail
 : "${DEF_MODEL:="qemu64"}"
 
 CLOCKSOURCE="tsc"
-[[ "${ARCH,,}" == "arm64" ]] && CLOCKSOURCE="arch_sys_counter"
+[[ "${ARCH,,}" == "arm64" ]] && CLOCKSOURCE="arch_sys_counter"
 CLOCK="/sys/devices/system/clocksource/clocksource0/current_clocksource"
 
 if [ ! -f "$CLOCK" ]; then
   warn "file \"$CLOCK\" cannot not found?"
 else
   result=$(<"$CLOCK")
-  result="${result//[![:print:]]/}"
   case "${result,,}" in
     "${CLOCKSOURCE,,}" ) ;;
     "kvm-clock" ) info "Nested KVM virtualization detected.." ;;
     "hyperv_clocksource_tsc_page" ) info "Nested Hyper-V virtualization detected.." ;;
-    "hpet" ) warn "unsupported clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'." ;;
+    "hpet" ) warn "unsupported clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'" ;;
-    *) warn "unexpected clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'." ;;
+    *) warn "unexpected clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'" ;;
   esac
 fi
 
@@ -37,14 +36,14 @@ if [[ "$KVM" != [Nn]* ]]; then
   KVM_ERR=""
 
   if [ ! -e /dev/kvm ]; then
-    KVM_ERR="(/dev/kvm is missing)"
+    KVM_ERR="(device file missing)"
   else
     if ! sh -c 'echo -n > /dev/kvm' &> /dev/null; then
-      KVM_ERR="(/dev/kvm is unwriteable)"
+      KVM_ERR="(no write access)"
     else
       flags=$(sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo)
       if ! grep -qw "vmx\|svm" <<< "$flags"; then
-        KVM_ERR="(not enabled in BIOS)"
+        KVM_ERR="(vmx/svm disabled)"
       fi
     fi
   fi
@@ -54,16 +53,8 @@ if [[ "$KVM" != [Nn]* ]]; then
     if [[ "$OSTYPE" =~ ^darwin ]]; then
       warn "you are using macOS which has no KVM support, this will cause a major loss of performance."
     else
-      kernel=$(uname -a)
+      error "KVM acceleration not available $KVM_ERR, this will cause a major loss of performance."
-      case "${kernel,,}" in
+      error "See the FAQ on how to diagnose the cause, or continue without KVM by setting KVM=N (not recommended)."
-        *"microsoft"* )
-          error "Please bind '/dev/kvm' as a volume in the optional container settings when using Docker Desktop." ;;
-        *"synology"* )
-          error "Please make sure that Synology VMM (Virtual Machine Manager) is installed and that '/dev/kvm' is binded to this container." ;;
-        *)
-          error "KVM acceleration is not available $KVM_ERR, this will cause a major loss of performance."
-          error "See the FAQ for possible causes, or continue without it by adding KVM: \"N\" (not recommended)." ;;
-      esac
       [[ "$DEBUG" != [Yy1]* ]] && exit 88
     fi
   fi

src/reset.sh

@@ -1,6 +1,10 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
+info () { printf "%b%s%b" "\E[1;34m❯ \E[1;36m" "${1:-}" "\E[0m\n"; }
+error () { printf "%b%s%b" "\E[1;31m❯ " "ERROR: ${1:-}" "\E[0m\n" >&2; }
+warn () { printf "%b%s%b" "\E[1;31m❯ " "Warning: ${1:-}" "\E[0m\n" >&2; }
+
 trap 'error "Status $? while: $BASH_COMMAND (line $LINENO/$BASH_LINENO)"' ERR
 
 [ ! -f "/run/entry.sh" ] && error "Script must run inside Docker container!" && exit 11
@@ -17,8 +21,8 @@ echo "❯ For support visit $SUPPORT"
 : "${CONSOLE:="N"}"        # Disable console mode
 : "${ALLOCATE:=""}"        # Preallocate diskspace
 : "${ARGUMENTS:=""}"       # Extra QEMU parameters
-: "${CPU_CORES:="2"}"      # Amount of CPU cores
+: "${CPU_CORES:="1"}"      # Amount of CPU cores
-: "${RAM_SIZE:="2G"}"      # Maximum RAM amount
+: "${RAM_SIZE:="1G"}"      # Maximum RAM amount
 : "${RAM_CHECK:="Y"}"      # Check available RAM
 : "${DISK_SIZE:="16G"}"    # Initial data disk size
 : "${STORAGE:="/storage"}" # Storage folder location
@@ -34,7 +38,7 @@ TEMPLATE="/var/www/index.html"
 FOOTER1="$APP for Docker v$(</run/version)"
 FOOTER2="<a href='$SUPPORT'>$SUPPORT</a>"
 
-CPU=$(cpu)
+CPI=$(lscpu)
 SYS=$(uname -r)
 HOST=$(hostname -s)
 KERNEL=$(echo "$SYS" | cut -b 1)
@@ -42,12 +46,41 @@ MINOR=$(echo "$SYS" | cut -d '.' -f2)
 ARCH=$(dpkg --print-architecture)
 CORES=$(grep -c '^processor' /proc/cpuinfo)
 
-if ! grep -qi "socket(s)" <<< "$(lscpu)"; then
+if ! grep -qi "socket(s)" <<< "$CPI"; then
   SOCKETS=1
 else
-  SOCKETS=$(lscpu | grep -m 1 -i 'socket(s)' | awk '{print $(2)}')
+  SOCKETS=$(echo "$CPI" | grep -m 1 -i 'socket(s)' | awk '{print $(2)}')
 fi
 
+if ! grep -qi "model name" <<< "$CPI"; then
+  CPU=""
+else
+  CPU=$(echo "$CPI" | grep -m 1 -i 'model name' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
+fi
+
+if [ -z "${CPU// /}" ] && grep -qi "model:" <<< "$CPI"; then
+  CPU=$(echo "$CPI" | grep -m 1 -i 'model:' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
+fi
+
+CPU="${CPU// CPU/}"
+CPU="${CPU// 6 Core/}"
+CPU="${CPU// 8 Core/}"
+CPU="${CPU// 16 Core/}"
+CPU="${CPU// 32 Core/}"
+CPU="${CPU// 64 Core/}"
+CPU="${CPU//10th Gen /}"
+CPU="${CPU//11th Gen /}"
+CPU="${CPU//12th Gen /}"
+CPU="${CPU//13th Gen /}"
+CPU="${CPU//14th Gen /}"
+CPU="${CPU//15th Gen /}"
+CPU="${CPU// Processor/}"
+CPU="${CPU// Quad core/}"
+CPU="${CPU// Core TM/ Core}"
+CPU="${CPU// with Radeon Graphics/}"
+CPU="${CPU// with Radeon Vega Graphics/}"
+
+[ -z "${CPU// /}" ] && CPU="Unknown"
 [ -n "${CPU_CORES//[0-9 ]}" ] && error "Invalid amount of CPU_CORES: $CPU_CORES" && exit 15
 
 # Check system
@@ -77,6 +110,30 @@ if [[ "${FS,,}" == "ecryptfs" ]] || [[ "${FS,,}" == "tmpfs" ]]; then
   DISK_CACHE="writeback"
 fi
 
+formatBytes() {
+  local result
+  result=$(numfmt --to=iec "$1")
+  local unit="${result//[0-9. ]}"
+  if [ -z "$unit" ]; then
+    unit="bytes"
+  else
+    unit=$(echo "${unit^^}" | sed 's/K/KB/g;s/M/MB/g;s/G/GB/g;s/T/TB/g')
+  fi
+  result="${result//[a-zA-Z ]/}"
+  if [[ "${2:-}" == "up" ]]; then
+    if [[ "$result" == *"."* ]]; then
+      result="${result%%.*}"
+      result=$((result+1))
+    fi
+  else
+    if [[ "${2:-}" == "down" ]]; then
+      result="${result%%.*}"
+    fi
+  fi
+  echo "$result $unit"
+  return 0
+}
+
 # Read memory
 RAM_SPARE=500000000
 RAM_AVAIL=$(free -b | grep -m 1 Mem: | awk '{print $7}')
@@ -124,6 +181,91 @@ rm -f /run/shm/dsm.url
 rm -rf /tmp/dsm
 rm -rf "$STORAGE/tmp"
 
+# Helper functions
+
+isAlive() {
+  local pid="$1"
+
+  if kill -0 "$pid" 2>/dev/null; then
+    return 0
+  fi
+
+  return 1
+}
+
+pKill() {
+  local pid="$1"
+
+  { kill -15 "$pid" || true; } 2>/dev/null
+
+  while isAlive "$pid"; do
+    sleep 0.2
+  done
+
+  return 0
+}
+
+fWait() {
+  local name="$1"
+
+  while pgrep -f -l "$name" >/dev/null; do
+    sleep 0.2
+  done
+
+  return 0
+}
+
+fKill() {
+  local name="$1"
+
+  { pkill -f "$name" || true; } 2>/dev/null
+  fWait "$name"
+
+  return 0
+}
+
+escape () {
+    local s
+    s=${1//&/\&amp;}
+    s=${s//</\&lt;}
+    s=${s//>/\&gt;}
+    s=${s//'"'/\&quot;}
+    printf -- %s "$s"
+    return 0
+}
+
+html()
+{
+    local title
+    local body
+    local script
+    local footer
+
+    title=$(escape "$APP")
+    title="<title>$title</title>"
+    footer=$(escape "$FOOTER1")
+
+    body=$(escape "$1")
+    if [[ "$body" == *"..." ]]; then
+      body="<p class=\"loading\">${body/.../}</p>"
+    fi
+
+    [ -n "${2:-}" ] && script="$2" || script=""
+
+    local HTML
+    HTML=$(<"$TEMPLATE")
+    HTML="${HTML/\[1\]/$title}"
+    HTML="${HTML/\[2\]/$script}"
+    HTML="${HTML/\[3\]/$body}"
+    HTML="${HTML/\[4\]/$footer}"
+    HTML="${HTML/\[5\]/$FOOTER2}"
+
+    echo "$HTML" > "$PAGE"
+    echo "$body" > "$INFO"
+
+    return 0
+}
+
 getCountry() {
   local url=$1
   local query=$2

src/utils.sh

@@ -1,175 +0,0 @@
-#!/usr/bin/env bash
-set -Eeuo pipefail
-
-# Helper functions
-
-info () { printf "%b%s%b" "\E[1;34m❯ \E[1;36m" "${1:-}" "\E[0m\n"; }
-error () { printf "%b%s%b" "\E[1;31m❯ " "ERROR: ${1:-}" "\E[0m\n" >&2; }
-warn () { printf "%b%s%b" "\E[1;31m❯ " "Warning: ${1:-}" "\E[0m\n" >&2; }
-
-formatBytes() {
-  local result
-  result=$(numfmt --to=iec --suffix=B "$1" | sed -r 's/([A-Z])/ \1/' | sed 's/ B/ bytes/g;')
-  local unit="${result//[0-9. ]}"
-  result="${result//[a-zA-Z ]/}"
-  if [[ "${2:-}" == "up" ]]; then
-    if [[ "$result" == *"."* ]]; then
-      result="${result%%.*}"
-      result=$((result+1))
-    fi
-  else
-    if [[ "${2:-}" == "down" ]]; then
-      result="${result%%.*}"
-    fi
-  fi
-  echo "$result $unit"
-  return 0
-}
-
-isAlive() {
-  local pid="$1"
-
-  if kill -0 "$pid" 2>/dev/null; then
-    return 0
-  fi
-
-  return 1
-}
-
-pKill() {
-  local pid="$1"
-
-  { kill -15 "$pid" || true; } 2>/dev/null
-
-  while isAlive "$pid"; do
-    sleep 0.2
-  done
-
-  return 0
-}
-
-fWait() {
-  local name="$1"
-
-  while pgrep -f -l "$name" >/dev/null; do
-    sleep 0.2
-  done
-
-  return 0
-}
-
-fKill() {
-  local name="$1"
-
-  { pkill -f "$name" || true; } 2>/dev/null
-  fWait "$name"
-
-  return 0
-}
-
-escape () {
-  local s
-  s=${1//&/\&}
-  s=${s//</\&lt;}
-  s=${s//>/\&gt;}
-  s=${s//'"'/\&quot;}
-  printf -- %s "$s"
-  return 0
-}
-
-html() {
-  local title
-  local body
-  local script
-  local footer
-
-  title=$(escape "$APP")
-  title="<title>$title</title>"
-  footer=$(escape "$FOOTER1")
-
-  body=$(escape "$1")
-  if [[ "$body" == *"..." ]]; then
-    body="<p class=\"loading\">${body/.../}</p>"
-  fi
-
-  [ -n "${2:-}" ] && script="$2" || script=""
-
-  local HTML
-  HTML=$(<"$TEMPLATE")
-  HTML="${HTML/\[1\]/$title}"
-  HTML="${HTML/\[2\]/$script}"
-  HTML="${HTML/\[3\]/$body}"
-  HTML="${HTML/\[4\]/$footer}"
-  HTML="${HTML/\[5\]/$FOOTER2}"
-
-  echo "$HTML" > "$PAGE"
-  echo "$body" > "$INFO"
-
-  return 0
-}
-
-cpu() {
-  local ret
-  local cpu=""
-
-  ret=$(lscpu)
-
-  if grep -qi "model name" <<< "$ret"; then
-    cpu=$(echo "$ret" | grep -m 1 -i 'model name' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
-  fi
-
-  if [ -z "${cpu// /}" ] && grep -qi "model:" <<< "$ret"; then
-    cpu=$(echo "$ret" | grep -m 1 -i 'model:' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
-  fi
-
-  cpu="${cpu// CPU/}"
-  cpu="${cpu// 4 Core/}"
-  cpu="${cpu// 6 Core/}"
-  cpu="${cpu// 8 Core/}"
-  cpu="${cpu// 10 Core/}"
-  cpu="${cpu// 12 Core/}"
-  cpu="${cpu// 16 Core/}"
-  cpu="${cpu// 32 Core/}"
-  cpu="${cpu// 48 Core/}"
-  cpu="${cpu// 64 Core/}"
-  cpu="${cpu// 96 Core/}"
-  cpu="${cpu// 128 Core/}"
-  cpu="${cpu//7th Gen /}"
-  cpu="${cpu//8th Gen /}"
-  cpu="${cpu//9th Gen /}"
-  cpu="${cpu//10th Gen /}"
-  cpu="${cpu//11th Gen /}"
-  cpu="${cpu//12th Gen /}"
-  cpu="${cpu//13th Gen /}"
-  cpu="${cpu//14th Gen /}"
-  cpu="${cpu//15th Gen /}"
-  cpu="${cpu// Processor/}"
-  cpu="${cpu// Quad core/}"
-  cpu="${cpu// Dual core/}"
-  cpu="${cpu// Octa core/}"
-  cpu="${cpu// Core TM/ Core}"
-  cpu="${cpu// with Radeon Graphics/}"
-  cpu="${cpu// with Radeon Vega Graphics/}"
-  cpu="${cpu// with Radeon Vega Mobile Gfx/}"
-
-  [ -z "${cpu// /}" ] && cpu="Unknown"
-
-  echo "$cpu"
-  return 0
-}
-
-hasDisk() {
-
-  [ -b "/disk" ] && return 0
-  [ -b "/disk1" ] && return 0
-  [ -b "/dev/disk1" ] && return 0
-  [ -b "${DEVICE:-}" ] && return 0
-
-  [ -z "${DISK_NAME:-}" ] && DISK_NAME="data"
-  [ -s "$STORAGE/$DISK_NAME.img" ]  && return 0
-  [ -s "$STORAGE/$DISK_NAME.qcow2" ] && return 0
-
-  return 1
-}
-
-return 0