.github/workflows/check.yml

@@ -17,7 +17,7 @@ jobs:
           SHELLCHECK_OPTS: -x --source-path=src -e SC2001 -e SC2034 -e SC2064 -e SC2317 -e SC2153 -e SC2028
       - 
         name: Lint Dockerfile
-        uses: hadolint/hadolint-action@v3.3.0
+        uses: hadolint/hadolint-action@v3.2.0
         with:
           dockerfile: Dockerfile
           ignore: DL3008,DL3003,DL3006,DL3013

.github/workflows/hub.yml

@@ -15,7 +15,7 @@ jobs:
     - uses: actions/checkout@v5
     - 
       name: Docker Hub Description
-      uses: peter-evans/dockerhub-description@v5
+      uses: peter-evans/dockerhub-description@v4
       with:
         username: ${{ secrets.DOCKERHUB_USERNAME }}
         password: ${{ secrets.DOCKERHUB_TOKEN }}

.github/workflows/test.yml

@@ -1,6 +1,11 @@
 on:
   workflow_dispatch:
   pull_request:
+    paths:
+      - '**/*.sh'
+      - 'Dockerfile'
+      - '.github/workflows/test.yml'
+      - '.github/workflows/check.yml'
 
 name: "Test"
 permissions: {}

Dockerfile

@@ -11,7 +11,6 @@ FROM qemux/qemu-host:2.05 AS builder
 
 FROM debian:trixie-slim
 
-ARG TARGETARCH
 ARG TARGETPLATFORM
 ARG VERSION_ARG="0.0"
 ARG DEBCONF_NOWARNINGS="yes"
@@ -29,7 +28,6 @@ RUN set -eu && \
         unzip \
         nginx \
         procps \
-        ethtool \
         python3 \
         python3-pip \
         python3-msgpack \
@@ -37,20 +35,16 @@ RUN set -eu && \
         xz-utils \
         iptables \
         iproute2 \
+        apt-utils \
         dnsmasq \
         fakeroot \
-        apt-utils \        
         net-tools \
         e2fsprogs \
         qemu-utils \
-        websocketd \
         iputils-ping \
-        inotify-tools \
         ca-certificates \
         netcat-openbsd \
         qemu-system-x86 && \
-    wget "https://github.com/qemus/passt/releases/download/v2025_09_19/passt_2025_09_19_${TARGETARCH}.deb" -O /tmp/passt.deb -q && \
-    dpkg -i /tmp/passt.deb && \
     apt-get clean && \
     pip3 install --no-cache-dir --break-system-packages --root-user-action=ignore dissect.cstruct && \
     mkdir -p /etc/qemu && \
@@ -63,7 +57,7 @@ RUN set -eu && \
 COPY --chmod=755 ./src /run/
 COPY --chmod=755 ./web /var/www/
 COPY --chmod=755 --from=builder /qemu-host.bin /run/host.bin
-COPY --chmod=744 ./web/conf/nginx.conf /etc/nginx/default.conf
+COPY --chmod=744 ./web/conf/nginx.conf /etc/nginx/sites-enabled/web.conf
 ADD --chmod=775 https://raw.githubusercontent.com/sud0woodo/patology/refs/heads/main/patology.py /run/extract.py
 
 VOLUME /storage
@@ -71,7 +65,7 @@ EXPOSE 22 139 445 5000
 
 ENV RAM_SIZE="2G"
 ENV CPU_CORES="2"
-ENV DISK_SIZE="256G"
+ENV DISK_SIZE="16G"
 
 HEALTHCHECK --interval=60s --start-period=45s --retries=2 CMD /run/check.sh
 

compose.yml

@@ -3,7 +3,7 @@ services:
     container_name: dsm
     image: vdsm/virtual-dsm
     environment:
-      DISK_SIZE: "256G"
+      DISK_SIZE: "16G"
     devices:
       - /dev/kvm
       - /dev/net/tun

kubernetes.yml

@@ -8,7 +8,7 @@ spec:
   - ReadWriteOnce
   resources:
     requests:
-      storage: 256Gi
+      storage: 16Gi
 ---
 apiVersion: apps/v1
 kind: Deployment
@@ -31,7 +31,7 @@ spec:
         image: vdsm/virtual-dsm
         env:
         - name: DISK_SIZE
-          value: "256G"
+          value: "16G"
         ports:
           - containerPort: 5000
             name: http

readme.md

@@ -30,7 +30,7 @@ services:
     container_name: dsm
     image: vdsm/virtual-dsm
     environment:
-      DISK_SIZE: "256G"
+      DISK_SIZE: "16G"
     devices:
       - /dev/kvm
       - /dev/net/tun
@@ -47,7 +47,7 @@ services:
 ##### Via Docker CLI:
 
 ```bash
-docker run -it --rm --name dsm -e "DISK_SIZE=256G" -p 5000:5000 --device=/dev/kvm --device=/dev/net/tun --cap-add NET_ADMIN -v "${PWD:-.}/dsm:/storage" --stop-timeout 120 vdsm/virtual-dsm
+docker run -it --rm --name dsm -p 5000:5000 --device=/dev/kvm --device=/dev/net/tun --cap-add NET_ADMIN -v "${PWD:-.}/dsm:/storage" --stop-timeout 120 vdsm/virtual-dsm
 ```
 
 ##### Via Kubernetes:
@@ -87,24 +87,35 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
  
 ### How do I change the size of the disk?
 
-  To expand the default size of 256 GB, locate the `DISK_SIZE` setting in your compose file and modify it to your preferred capacity:
+  To expand the default size of 16 GB, locate the `DISK_SIZE` setting in your compose file and modify it to your preferred capacity:
 
   ```yaml
   environment:
-    DISK_SIZE: "512G"
+    DISK_SIZE: "128G"
   ```
   
 > [!TIP]
 > This can also be used to resize the existing disk to a larger capacity without any data loss.
 
+### How do I create a growable disk?
+
+  By default, the entire capacity of the disk will be reserved in advance.
+
+  To create a growable disk that only allocates space that is actually used, add the following environment variable:
+
+  ```yaml
+  environment:
+    DISK_FMT: "qcow2"
+  ```
+
 ### How do I add multiple disks?
 
   To create additional disks, modify your compose file like this:
   
   ```yaml
   environment:
-    DISK2_SIZE: "500G"
+    DISK2_SIZE: "32G"
-    DISK3_SIZE: "750G"
+    DISK3_SIZE: "64G"
   volumes:
     - ./example2:/storage2
     - ./example3:/storage3
@@ -252,6 +263,14 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
   There are only two minor differences: the Virtual Machine Manager package is not available, and Surveillance Station will not include any free licenses.
 
+### How do I run Windows in a container?
+
+  You can use [dockur/windows](https://github.com/dockur/windows) for that. It shares many of the same features, and even has completely automatic installation.
+
+### How do I run a Linux desktop in a container?
+
+  You can use [qemus/qemu](https://github.com/qemus/qemu) in that case.
+
 ### Is this project legal?
 
   Yes, this project contains only open-source code and does not distribute any copyrighted material. Neither does it try to circumvent any copyright protection measures. So under all applicable laws, this project will be considered legal. 

src/check.sh

@@ -1,7 +1,6 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
-: "${DHCP:="N"}"
 : "${NETWORK:="Y"}"
 
 [ -f "/run/shm/qemu.end" ] && echo "QEMU is shutting down.." && exit 1
@@ -10,7 +9,6 @@ set -Eeuo pipefail
 
 file="/run/shm/dsm.url"
 address="/run/shm/qemu.ip"
-gateway="/run/shm/qemu.gw"
 
 [ ! -s  "$file" ] && echo "DSM has not enabled networking yet.." && exit 1
 
@@ -18,13 +16,13 @@ location=$(<"$file")
 
 if ! curl -m 20 -ILfSs "http://$location/" > /dev/null; then
 
-  if [[ "$DHCP" == [Yy1]* ]]; then
+  if [[ "$location" == "20.20"* ]]; then
-    ip=$(<"$address")
+    ip="20.20.20.1"
-    echo "Failed to reach DSM at http://$location"
-  else
-    ip=$(<"$gateway")
     port="${location##*:}"
     echo "Failed to reach DSM at port $port"
+  else
+    echo "Failed to reach DSM at http://$location"
+    ip=$(<"$address")
   fi
 
   echo "You might need to whitelist IP $ip in the DSM firewall." && exit 1

src/config.sh

@@ -37,7 +37,7 @@ if [[ "$RAM_CHECK" != [Nn]* ]]; then
 fi
 
 if [[ "$DEBUG" == [Yy1]* ]]; then
-  printf "QEMU arguments:\n\n%s\n\n" "${ARGS// -/$'\n-'}"
+  printf "Arguments:\n\n%s\n\n" "${ARGS// -/$'\n-'}"
 fi
 
 return 0

src/disk.sh

@@ -82,7 +82,7 @@ isCow() {
 supportsDirect() {
   local FS=$1
 
-  if [[ "${FS,,}" == "ecryptfs" || "${FS,,}" == "tmpfs" ]]; then
+  if [[ "${FS,,}" == "ecryptfs" ]] || [[ "${FS,,}" == "tmpfs" ]]; then
     return 1
   fi
 
@@ -507,8 +507,12 @@ addDevice () {
   physical="${physical%% *}"
 
   if [ -n "$physical" ]; then
-    if [[ "$physical" != "512" ]]; then
+    if [[ "$physical" == "512" ]] || [[ "$physical" == "4096" ]]; then
-      sectors=",logical_block_size=$logical,physical_block_size=$physical"
+      if [[ "$physical" == "4096" ]]; then
+        sectors=",logical_block_size=$logical,physical_block_size=$physical"
+      fi
+    else
+      warn "Unknown physical sector size: $physical for $DISK_DEV"
     fi
   else
     warn "Failed to determine the sector size for $DISK_DEV"
@@ -519,9 +523,7 @@ addDevice () {
   return 0
 }
 
-msg="Initializing disks..."
+html "Initializing disks..."
-html "$msg"
-[[ "$DEBUG" == [Yy1]* ]] && echo "$msg"
 
 [ -z "${DISK_OPTS:-}" ] && DISK_OPTS=""
 [ -z "${DISK_TYPE:-}" ] && DISK_TYPE="scsi"
@@ -533,7 +535,11 @@ case "${DISK_TYPE,,}" in
 esac
 
 if [ -z "$ALLOCATE" ]; then
-  ALLOCATE="N"
+  if [[ "${DISK_FMT,,}" == "raw" ]]; then
+    ALLOCATE="Y"
+  else
+    ALLOCATE="N"
+  fi
 fi
 
 if [[ "$ALLOCATE" == [Nn]* ]]; then
@@ -548,7 +554,7 @@ DISK_OPTS+=$(createDevice "$BOOT" "$DISK_TYPE" "1" "0xa" "raw" "$DISK_IO" "$DISK
 DISK_OPTS+=$(createDevice "$SYSTEM" "$DISK_TYPE" "2" "0xb" "raw" "$DISK_IO" "$DISK_CACHE" "" "")
 
 DISK1_FILE="$STORAGE/${DISK_NAME}"
-if [ ! -f "$DISK1_FILE.img" ] && [ -f "$STORAGE/data${DISK_SIZE}.img" ]; then
+if [[ ! -f "$DISK1_FILE.img" ]] && [[ -f "$STORAGE/data${DISK_SIZE}.img" ]]; then
   # Fallback for legacy installs
   mv "$STORAGE/data${DISK_SIZE}.img" "$DISK1_FILE.img"
 fi
@@ -557,7 +563,7 @@ DISK2_FILE="/storage2/${DISK_NAME}2"
 if [ ! -f "$DISK2_FILE.img" ]; then
   # Fallback for legacy installs
   FALLBACK="/storage2/data.img"
-  if [[ -f "$DISK1_FILE.img" && -f "$FALLBACK" ]]; then
+  if [[ -f "$DISK1_FILE.img" ]] && [[ -f "$FALLBACK" ]]; then
     SIZE1=$(stat -c%s "$FALLBACK")
     SIZE2=$(stat -c%s "$DISK1_FILE.img")
     if [[ SIZE1 -ne SIZE2 ]]; then
@@ -570,7 +576,7 @@ DISK3_FILE="/storage3/${DISK_NAME}3"
 if [ ! -f "$DISK3_FILE.img" ]; then
   # Fallback for legacy installs
   FALLBACK="/storage3/data.img"
-  if [[ -f "$DISK1_FILE.img" && -f "$FALLBACK" ]]; then
+  if [[ -f "$DISK1_FILE.img" ]] && [[ -f "$FALLBACK" ]]; then
     SIZE1=$(stat -c%s "$FALLBACK")
     SIZE2=$(stat -c%s "$DISK1_FILE.img")
     if [[ SIZE1 -ne SIZE2 ]]; then

src/display.sh

@@ -10,7 +10,7 @@ set -Eeuo pipefail
 
 CPU_VENDOR=$(lscpu | awk '/Vendor ID/{print $3}')
 
-if [[ "$GPU" != [Yy1]* || "$CPU_VENDOR" != "GenuineIntel" || "$ARCH" != "amd64" ]]; then
+if [[ "$GPU" != [Yy1]* ]] || [[ "$CPU_VENDOR" != "GenuineIntel" ]] || [[ "$ARCH" != "amd64" ]]; then
 
   [[ "${DISPLAY,,}" == "none" ]] && VGA="none"
   DISPLAY_OPTS="-display $DISPLAY -vga $VGA"
@@ -18,10 +18,6 @@ if [[ "$GPU" != [Yy1]* || "$CPU_VENDOR" != "GenuineIntel" || "$ARCH" != "amd64"
 
 fi
 
-msg="Configuring display drivers..."
-html "$msg"
-[[ "$DEBUG" == [Yy1]* ]] && echo "$msg"
-
 DISPLAY_OPTS="-display egl-headless,rendernode=$RENDERNODE"
 DISPLAY_OPTS+=" -vga $VGA"
 

src/entry.sh

@@ -1,16 +1,13 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
-: "${PLATFORM:="x64"}"
 : "${APP:="Virtual DSM"}"
 : "${SUPPORT:="https://github.com/vdsm/virtual-dsm"}"
 
 cd /run
 
-. start.sh      # Startup hook
 . utils.sh      # Load functions
 . reset.sh      # Initialize system
-. server.sh     # Start webserver
 . install.sh    # Run installation
 . disk.sh       # Initialize disks
 . display.sh    # Initialize graphics
@@ -33,7 +30,7 @@ fi
 (( rc != 0 )) && error "$(<"$QEMU_LOG")" && exit 15
 
 terminal
-tail -fn +0 "$QEMU_LOG" --pid=$$ 2>/dev/null &
+tail -fn +0 "$QEMU_LOG" 2>/dev/null &
 cat "$QEMU_TERM" 2>/dev/null & wait $! || :
 
 sleep 1 & wait $!

src/install.sh

@@ -18,7 +18,7 @@ DIR=$(find / -maxdepth 1 -type d -iname "$FN" -print -quit)
 
 if [ -d "$DIR" ]; then
   BASE="DSM_VirtualDSM" && URL="file://$DIR" 
-  if [[ ! -s "$STORAGE/$BASE.boot.img" || ! -s "$STORAGE/$BASE.system.img" ]]; then
+  if [[ ! -s "$STORAGE/$BASE.boot.img" ]] || [[ ! -s "$STORAGE/$BASE.system.img" ]]; then
     error "The bind $DIR maps to a file that does not exist!" && exit 65
   fi
 fi
@@ -31,17 +31,16 @@ if [ -n "$URL" ] && [ ! -s "$FILE" ] && [ ! -d "$DIR" ]; then
   BASE=$(basename "$URL" .pat)
   if [ ! -s "$STORAGE/$BASE.system.img" ]; then
     BASE=$(basename "${URL%%\?*}" .pat)
-    BASE="${BASE//+/ }"
+    : "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
-    printf -v BASE '%b' "${BASE//%/\\x}"
+    BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
-    BASE="${BASE//[!A-Za-z0-9._-]/_}"
   fi
-  if [[ "${URL,,}" != "http"* && "${URL,,}" != "file:"* ]] ; then
+  if [[ "${URL,,}" != "http"* ]] && [[ "${URL,,}" != "file:"* ]] ; then
     [ ! -s "$STORAGE/$BASE.pat" ] && error "Invalid URL:  $URL" && exit 65
     URL="file://$STORAGE/$BASE.pat"
   fi
 fi
 
-if [[ -s "$STORAGE/$BASE.boot.img" && -s "$STORAGE/$BASE.system.img" ]]; then
+if [[ -s "$STORAGE/$BASE.boot.img" ]] && [[ -s "$STORAGE/$BASE.system.img" ]]; then
   return 0  # Previous installation found
 fi
 
@@ -66,9 +65,8 @@ fi
 
 if [ ! -s "$FILE" ]; then
   BASE=$(basename "${URL%%\?*}" .pat)
-  BASE="${BASE//+/ }"
+  : "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
-  printf -v BASE '%b' "${BASE//%/\\x}"
+  BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
-  BASE="${BASE//[!A-Za-z0-9._-]/_}"
 fi
 
 if [[ "$URL" != "file://$STORAGE/$BASE.pat" ]]; then
@@ -90,7 +88,7 @@ if [[ "${FS,,}" == "fuse"* ]]; then
   info "Warning: the filesystem of $STORAGE is FUSE, this extra layer will negatively affect performance!"
 fi
 
-if [[ "${FS,,}" == "ecryptfs" || "${FS,,}" == "tmpfs" ]]; then
+if [[ "${FS,,}" == "ecryptfs" ]] || [[ "${FS,,}" == "tmpfs" ]]; then
   info "Warning: the filesystem of $STORAGE is $FS, which does not support O_DIRECT mode, adjusting settings..."
 fi
 
@@ -301,4 +299,7 @@ fi
 mv -f "$BOOT" "$STORAGE/$BASE.boot.img"
 rm -rf "$TMP"
 
+html "Booting DSM instance..."
+sleep 1.2
+
 return 0

src/network.sh

@@ -7,25 +7,17 @@ set -Eeuo pipefail
 : "${MTU:=""}"
 : "${DHCP:="N"}"
 : "${NETWORK:="Y"}"
-: "${HOST_PORTS:=""}"
 : "${USER_PORTS:=""}"
+: "${HOST_PORTS:=""}"
 : "${ADAPTER:="virtio-net-pci"}"
 
-: "${VM_NET_IP:=""}"
 : "${VM_NET_DEV:=""}"
 : "${VM_NET_TAP:="dsm"}"
 : "${VM_NET_MAC:="$MAC"}"
-: "${VM_NET_BRIDGE:="docker"}"
+: "${VM_NET_IP:="20.20.20.21"}"
 : "${VM_NET_HOST:="VirtualDSM"}"
-: "${VM_NET_MASK:="255.255.255.0"}"
-
-: "${PASST:="passt"}"
-: "${PASST_MTU:=""}"
-: "${PASST_OPTS:=""}"
-: "${PASST_DEBUG:=""}"
 
 : "${DNSMASQ_OPTS:=""}"
-: "${DNSMASQ_DEBUG:=""}"
 : "${DNSMASQ:="/usr/sbin/dnsmasq"}"
 : "${DNSMASQ_CONF_DIR:="/etc/dnsmasq.d"}"
 
@@ -37,8 +29,6 @@ ADD_ERR="Please add the following setting to your container:"
 
 configureDHCP() {
 
-  [[ "$DEBUG" == [Yy1]* ]] && echo "Configuring MACVTAP networking..."
-
   # Create the necessary file structure for /dev/vhost-net
   if [ ! -c /dev/vhost-net ]; then
     if mknod /dev/vhost-net c 10 238; then
@@ -69,15 +59,14 @@ configureDHCP() {
       fi ;;
   esac
 
-  if [[ "$MTU" != "0" && "$MTU" != "1500" ]]; then
+  if [[ "$MTU" != "0" ]] && [[ "$MTU" != "1500" ]]; then
     if ! ip link set dev "$VM_NET_TAP" mtu "$MTU"; then
-      warn "Failed to set MTU size to $MTU."
+      warn "Failed to set MTU size.."
     fi
   fi
 
   while ! ip link set "$VM_NET_TAP" up; do
     info "Waiting for MAC address $VM_NET_MAC to become available..."
-    info "If you cloned this machine, please delete the 'dsm.mac' file to generate a different MAC address."
     sleep 2
   done
 
@@ -89,7 +78,7 @@ configureDHCP() {
   IFS=: read -r MAJOR MINOR < <(cat /sys/devices/virtual/net/"$VM_NET_TAP"/tap*/dev)
   (( MAJOR < 1)) && error "Cannot find: sys/devices/virtual/net/$VM_NET_TAP" && return 1
 
-  [[ ! -e "$TAP_PATH" && -e "/dev0/${TAP_PATH##*/}" ]] && ln -s "/dev0/${TAP_PATH##*/}" "$TAP_PATH"
+  [[ ! -e "$TAP_PATH" ]] && [[ -e "/dev0/${TAP_PATH##*/}" ]] && ln -s "/dev0/${TAP_PATH##*/}" "$TAP_PATH"
 
   if [[ ! -e "$TAP_PATH" ]]; then
     { mknod "$TAP_PATH" c "$MAJOR" "$MINOR" ; rc=$?; } || :
@@ -115,82 +104,37 @@ configureDHCP() {
 
 configureDNS() {
 
-  local if="$1"
+  # Create lease file for faster resolve
-  local ip="$2"
+  echo "0 $VM_NET_MAC $VM_NET_IP $VM_NET_HOST 01:$VM_NET_MAC" > /var/lib/misc/dnsmasq.leases
-  local mac="$3"
+  chmod 644 /var/lib/misc/dnsmasq.leases
-  local host="$4"
-  local mask="$5"
-  local gateway="$6"
 
-  echo "$gateway" > /run/shm/qemu.gw
+  # dnsmasq configuration:
+  DNSMASQ_OPTS+=" --dhcp-authoritative"
 
-  [[ "${DNSMASQ_DISABLE:-}" == [Yy1]* ]] && return 0
+  # Set DHCP range and host
-  [[ "$DEBUG" == [Yy1]* ]] && echo "Starting dnsmasq daemon..."
+  DNSMASQ_OPTS+=" --dhcp-range=$VM_NET_IP,$VM_NET_IP"
+  DNSMASQ_OPTS+=" --dhcp-host=$VM_NET_MAC,,$VM_NET_IP,$VM_NET_HOST,infinite"
 
-  local log="/var/log/dnsmasq.log"
+  # Set DNS server and gateway
-  rm -f "$log"
+  DNSMASQ_OPTS+=" --dhcp-option=option:netmask,255.255.255.0"
-
+  DNSMASQ_OPTS+=" --dhcp-option=option:router,${VM_NET_IP%.*}.1"
-  case "${NETWORK,,}" in
+  DNSMASQ_OPTS+=" --dhcp-option=option:dns-server,${VM_NET_IP%.*}.1"
-    "nat" | "tap" | "tun" | "tuntap" | "y" )
-
-      # Create lease file for faster resolve
-      echo "0 $mac $ip $host 01:$mac" > /var/lib/misc/dnsmasq.leases
-      chmod 644 /var/lib/misc/dnsmasq.leases
-
-      # dnsmasq configuration:
-      DNSMASQ_OPTS+=" --dhcp-authoritative"
-
-      # Set DHCP range and host
-      DNSMASQ_OPTS+=" --dhcp-range=$ip,$ip"
-      DNSMASQ_OPTS+=" --dhcp-host=$mac,,$ip,$host,infinite"
-
-      # Set DNS server and gateway
-      DNSMASQ_OPTS+=" --dhcp-option=option:netmask,$mask"
-      DNSMASQ_OPTS+=" --dhcp-option=option:router,$gateway"
-      DNSMASQ_OPTS+=" --dhcp-option=option:dns-server,$gateway"
-
-  esac
-
-  # Set interfaces
-  DNSMASQ_OPTS+=" --interface=$if"
-  DNSMASQ_OPTS+=" --bind-interfaces"
 
   # Add DNS entry for container
-  DNSMASQ_OPTS+=" --address=/host.lan/$gateway"
+  DNSMASQ_OPTS+=" --address=/host.lan/${VM_NET_IP%.*}.1"
-
-  # Set local dns resolver to dnsmasq when needed
-  [ -f /etc/resolv.dnsmasq ] && DNSMASQ_OPTS+=" --resolv-file=/etc/resolv.dnsmasq"
-
-  # Enable logging to file
-  DNSMASQ_OPTS+=" --log-facility=$log"
 
   DNSMASQ_OPTS=$(echo "$DNSMASQ_OPTS" | sed 's/\t/ /g' | tr -s ' ' | sed 's/^ *//')
-  [[ "$DEBUG" == [Yy1]* ]] && printf "Dnsmasq arguments:\n\n%s\n\n" "${DNSMASQ_OPTS// -/$'\n-'}"
+
+  if [[ "${DEBUG_DNS:-}" == [Yy1]* ]]; then
+   DNSMASQ_OPTS+=" -d"
+   $DNSMASQ ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS} &
+   return 0
+  fi
 
   if ! $DNSMASQ ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS}; then
-
+    error "Failed to start dnsmasq, reason: $?" && return 1
-    local msg="Failed to start Dnsmasq, reason: $?"
-    [ -f "$log" ] && cat "$log"
-    error "$msg"
-
-    return 1
   fi
 
-  if [[ "$DNSMASQ_DEBUG" == [Yy1]* ]]; then
-    tail -fn +0 "$log" --pid=$$ &
-  fi
-
-  return 0
-}
-
-getHostPorts() {
-
-  local list="$1"
-  list=$(echo "${list// /}" | sed 's/,*$//g')
-
-  [ -z "$list" ] && list="$MON_PORT" || list+=",$MON_PORT"
-
-  echo "$list"
   return 0
 }
 
@@ -198,160 +142,57 @@ getUserPorts() {
 
   local args=""
   local list=$1
-  list=$(echo "${list// /}" | sed 's/,*$//g')
-
   local ssh="22"
   local dsm="5000"
+
   [ -z "$list" ] && list="$ssh,$dsm" || list+=",$ssh,$dsm"
 
-  echo "$list"
-  return 0
-}
-
-getSlirp() {
-
-  local args=""
-  local list=""
-
-  list=$(getUserPorts)
   list="${list//,/ }"
   list="${list## }"
   list="${list%% }"
 
   for port in $list; do
-
+    args+="hostfwd=tcp::$port-$VM_NET_IP:$port,"
-    proto="tcp"
-    num="${port%/tcp}"
-
-    if [[ "$port" == *"/udp" ]]; then
-      proto="udp"
-      num="${port%/udp}"
-    elif [[ "$port" != *"/tcp" ]]; then
-      args+="hostfwd=$proto::$num-$VM_NET_IP:$num,"
-      proto="udp"
-      num="${port%/udp}"
-    fi
-
-    args+="hostfwd=$proto::$num-$VM_NET_IP:$num,"
   done
 
   echo "${args%?}"
   return 0
 }
 
-configureSlirp() {
+getHostPorts() {
 
-  [[ "$DEBUG" == [Yy1]* ]] && echo "Configuring slirp networking..."
+  local list=$1
 
-  local ip="$IP"
+  [ -z "$list" ] && echo "" && return 0
-  [ -n "$VM_NET_IP" ] && ip="$VM_NET_IP"
-  local base="${ip%.*}."
-  [ "${ip/$base/}" -lt "4" ] && ip="${ip%.*}.4"
-  local gateway="${ip%.*}.1"
 
-  local ipv6=""
+  if [[ "$list" != *","* ]]; then
-  [ -n "$IP6" ] && ipv6="ipv6=on,"
+    echo " ! --dport $list"
-
-  NET_OPTS="-netdev user,id=hostnet0,ipv4=on,host=$gateway,net=${gateway%.*}.0/24,dhcpstart=$ip,${ipv6}hostname=$VM_NET_HOST"
-
-  local forward=""
-  forward=$(getUserPorts "${USER_PORTS:-}")
-  [ -n "$forward" ] && NET_OPTS+=",$forward"
-
-  if [[ "${DNSMASQ_DISABLE:-}" == [Yy1]* ]]; then
-    echo "$gateway" > /run/shm/qemu.gw
   else
-    cp /etc/resolv.conf /etc/resolv.dnsmasq
+    echo " -m multiport ! --dports $list"
-    configureDNS "lo" "$ip" "$VM_NET_MAC" "$VM_NET_HOST" "$VM_NET_MASK" "$gateway" || return 1
-    echo -e "nameserver 127.0.0.1\nsearch .\noptions ndots:0" >/etc/resolv.conf
   fi
 
-  VM_NET_IP="$ip"
   return 0
 }
 
-configurePasst() {
+configureUser() {
 
-  [[ "$DEBUG" == [Yy1]* ]] && echo "Configuring user-mode networking..."
+  if [ -z "$IP6" ]; then
-
+    NET_OPTS="-netdev user,id=hostnet0,host=${VM_NET_IP%.*}.1,net=${VM_NET_IP%.*}.0/24,dhcpstart=$VM_NET_IP,hostname=$VM_NET_HOST"
-  local log="/var/log/passt.log"
-  rm -f "$log"
-
-  local pid="/var/run/dnsmasq.pid"
-  [ -s "$pid" ] && pKill "$(<"$pid")"
-
-  local ip="$IP"
-  [ -n "$VM_NET_IP" ] && ip="$VM_NET_IP"
-
-  local gateway=""
-  if [[ "$ip" != *".1" ]]; then
-    gateway="${ip%.*}.1"
   else
-    gateway="${ip%.*}.2"
+    NET_OPTS="-netdev user,id=hostnet0,ipv4=on,host=${VM_NET_IP%.*}.1,net=${VM_NET_IP%.*}.0/24,dhcpstart=$VM_NET_IP,ipv6=on,hostname=$VM_NET_HOST"
   fi
 
-  # passt configuration:
+  local forward
-  [ -z "$IP6" ] && PASST_OPTS+=" -4"
+  forward=$(getUserPorts "$USER_PORTS")
+  [ -n "$forward" ] && NET_OPTS+=",$forward"
 
-  PASST_OPTS+=" -a $ip"
-  PASST_OPTS+=" -g $gateway"
-  PASST_OPTS+=" -n $VM_NET_MASK"
-  [ -n "$PASST_MTU" ] && PASST_OPTS+=" -m $PASST_MTU"
-
-  local forward=""
-  forward=$(getUserPorts "${USER_PORTS:-}")
-  forward="${forward///tcp}"
-  forward="${forward///udp}"
-
-  if [ -n "$forward" ]; then
-    forward="%${VM_NET_DEV}/$forward"
-    PASST_OPTS+=" -t $forward"
-    PASST_OPTS+=" -u $forward"
-  fi
-
-  PASST_OPTS+=" -H $VM_NET_HOST"
-  PASST_OPTS+=" -M $GATEWAY_MAC"
-  PASST_OPTS+=" -P /var/run/passt.pid"
-  PASST_OPTS+=" -l $log"
-  PASST_OPTS+=" -q"
-
-  if [[ "${DNSMASQ_DISABLE:-}" != [Yy1]* ]]; then
-    cp /etc/resolv.conf /etc/resolv.dnsmasq
-    echo -e "nameserver 127.0.0.1\nsearch .\noptions ndots:0" >/etc/resolv.conf
-  fi
-
-  PASST_OPTS=$(echo "$PASST_OPTS" | sed 's/\t/ /g' | tr -s ' ' | sed 's/^ *//')
-  [[ "$DEBUG" == [Yy1]* ]] && printf "Passt arguments:\n\n%s\n\n" "${PASST_OPTS// -/$'\n-'}"
-
-  if ! $PASST ${PASST_OPTS:+ $PASST_OPTS} >/dev/null 2>&1; then
-    local msg="Failed to start passt, reason: $?"
-    [ -f "$log" ] && cat "$log"
-    error "$msg"
-    return 1
-  fi
-
-  if [[ "$PASST_DEBUG" == [Yy1]* ]]; then
-    tail -fn +0 "$log" --pid=$$ &
-  else
-    if [[ "$DEBUG" == [Yy1]* ]]; then
-      [ -f "$log" ] && cat "$log" && echo ""
-    fi
-  fi
-
-  NET_OPTS="-netdev stream,id=hostnet0,server=off,addr.type=unix,addr.path=/tmp/passt_1.socket"
-
-  configureDNS "lo" "$ip" "$VM_NET_MAC" "$VM_NET_HOST" "$VM_NET_MASK" "$gateway" || return 1
-
-  VM_NET_IP="$ip"
   return 0
 }
 
 configureNAT() {
 
   local tuntap="TUN device is missing. $ADD_ERR --device /dev/net/tun"
-  local tables="the 'ip_tables' kernel module is not loaded. Try this command: sudo modprobe ip_tables iptable_nat"
+  local tables="The 'ip_tables' kernel module is not loaded. Try this command: sudo modprobe ip_tables iptable_nat"
-
-  [[ "$DEBUG" == [Yy1]* ]] && echo "Configuring NAT networking..."
 
   # Create the necessary file structure for /dev/net/tun
   if [ ! -c /dev/net/tun ]; then
@@ -363,64 +204,50 @@ configureNAT() {
   fi
 
   if [ ! -c /dev/net/tun ]; then
-    warn "$tuntap" && return 1
+    error "$tuntap" && return 1
   fi
 
   # Check port forwarding flag
   if [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
     { sysctl -w net.ipv4.ip_forward=1 > /dev/null 2>&1; rc=$?; } || :
     if (( rc != 0 )) || [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
-      warn "IP forwarding is disabled. $ADD_ERR --sysctl net.ipv4.ip_forward=1"
+      [[ "$PODMAN" == [Yy1]* ]] && return 1
+      error "IP forwarding is disabled. $ADD_ERR --sysctl net.ipv4.ip_forward=1"
       return 1
     fi
   fi
 
-  local ip base
-  base=$(echo "$IP" | sed -r 's/([^.]*.){2}//')
-  if [[ "$IP" != "172.30."* ]]; then
-    ip="172.30.$base"
-  else
-    ip="172.31.$base"
-  fi
-
-  [ -n "$VM_NET_IP" ] && ip="$VM_NET_IP"
-
-  local gateway=""
-  if [[ "$ip" != *".1" ]]; then
-    gateway="${ip%.*}.1"
-  else
-    gateway="${ip%.*}.2"
-  fi
-
   # Create a bridge with a static IP for the VM guest
-  { ip link add dev "$VM_NET_BRIDGE" type bridge ; rc=$?; } || :
+  { ip link add dev dockerbridge type bridge ; rc=$?; } || :
 
   if (( rc != 0 )); then
-    warn "failed to create bridge. $ADD_ERR --cap-add NET_ADMIN" && return 1
+    error "Failed to create bridge. $ADD_ERR --cap-add NET_ADMIN" && return 1
   fi
 
-  if ! ip address add "$gateway/24" broadcast "${ip%.*}.255" dev "$VM_NET_BRIDGE"; then
+  if ! ip address add "${VM_NET_IP%.*}.1/24" broadcast "${VM_NET_IP%.*}.255" dev dockerbridge; then
-    warn "failed to add IP address pool!" && return 1
+    error "Failed to add IP address pool!" && return 1
   fi
 
-  while ! ip link set "$VM_NET_BRIDGE" up; do
+  while ! ip link set dockerbridge up; do
     info "Waiting for IP address to become available..."
     sleep 2
   done
 
   # QEMU Works with taps, set tap to the bridge created
   if ! ip tuntap add dev "$VM_NET_TAP" mode tap; then
-    warn "$tuntap" && return 1
+    error "$tuntap" && return 1
   fi
 
-  if [[ "$MTU" != "0" && "$MTU" != "1500" ]]; then
+  if [[ "$MTU" != "0" ]] && [[ "$MTU" != "1500" ]]; then
     if ! ip link set dev "$VM_NET_TAP" mtu "$MTU"; then
-      warn "failed to set MTU size to $MTU."
+      warn "Failed to set MTU size.."
     fi
   fi
 
+  GATEWAY_MAC=$(echo "$VM_NET_MAC" | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:\1:\2:\3:\4:\5/')
+
   if ! ip link set dev "$VM_NET_TAP" address "$GATEWAY_MAC"; then
-    warn "failed to set gateway MAC address.."
+    warn "Failed to set gateway MAC address.."
   fi
 
   while ! ip link set "$VM_NET_TAP" up promisc on; do
@@ -428,39 +255,27 @@ configureNAT() {
     sleep 2
   done
 
-  if ! ip link set dev "$VM_NET_TAP" master "$VM_NET_BRIDGE"; then
+  if ! ip link set dev "$VM_NET_TAP" master dockerbridge; then
-    warn "failed to set master bridge!" && return 1
+    error "Failed to set IP link!" && return 1
   fi
 
-  if grep -wq "nf_tables" /proc/modules; then
+  # Add internet connection to the VM
-    update-alternatives --set iptables /usr/sbin/iptables-nft > /dev/null
+  update-alternatives --set iptables /usr/sbin/iptables-legacy > /dev/null
-    update-alternatives --set ip6tables /usr/sbin/ip6tables-nft > /dev/null
+  update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy > /dev/null
-  else
-    update-alternatives --set iptables /usr/sbin/iptables-legacy > /dev/null
-    update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy > /dev/null
-  fi
 
   exclude=$(getHostPorts "$HOST_PORTS")
 
-  if [ -n "$exclude" ]; then
-    if [[ "$exclude" != *","* ]]; then
-      exclude=" ! --dport $exclude"
-    else
-      exclude=" -m multiport ! --dports $exclude"
-    fi
-  fi
-
   if ! iptables -t nat -A POSTROUTING -o "$VM_NET_DEV" -j MASQUERADE; then
-    warn "$tables" && return 1
+    error "$tables" && return 1
   fi
 
   # shellcheck disable=SC2086
-  if ! iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p tcp${exclude} -j DNAT --to "$ip"; then
+  if ! iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p tcp${exclude} -j DNAT --to "$VM_NET_IP"; then
-    warn "failed to configure IP tables!" && return 1
+    error "Failed to configure IP tables!" && return 1
   fi
 
-  if ! iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p udp -j DNAT --to "$ip"; then
+  if ! iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p udp -j DNAT --to "$VM_NET_IP"; then
-    warn "failed to configure IP tables!" && return 1
+    error "Failed to configure IP tables!" && return 1
   fi
 
   if (( KERNEL > 4 )); then
@@ -477,9 +292,8 @@ configureNAT() {
 
   NET_OPTS+=",script=no,downscript=no"
 
-  configureDNS "$VM_NET_BRIDGE" "$ip" "$VM_NET_MAC" "$VM_NET_HOST" "$VM_NET_MASK" "$gateway" || return 1
+  configureDNS || return 1
 
-  VM_NET_IP="$ip"
   return 0
 }
 
@@ -487,43 +301,26 @@ closeBridge() {
 
   local pid="/var/run/dnsmasq.pid"
   [ -s "$pid" ] && pKill "$(<"$pid")"
-  rm -f "$pid"
 
-  pid="/var/run/passt.pid"
+  [[ "${NETWORK,,}" == "user"* ]] && return 0
-  [ -s "$pid" ] && pKill "$(<"$pid")"
-  rm -f "$pid"
-
-  case "${NETWORK,,}" in
-    "user"* | "passt" | "slirp" ) return 0 ;;
-  esac
 
   ip link set "$VM_NET_TAP" down promisc off &> null || true
   ip link delete "$VM_NET_TAP" &> null || true
 
-  ip link set "$VM_NET_BRIDGE" down &> null || true
+  ip link set dockerbridge down &> null || true
-  ip link delete "$VM_NET_BRIDGE" &> null || true
+  ip link delete dockerbridge &> null || true
-
-  return 0
-}
-
-closeWeb() {
-
-  # Shutdown nginx
-  nginx -s stop 2> /dev/null
-  fWait "nginx"
-
-  # Shutdown websocket
-  local pid="/var/run/websocketd.pid"
-  [ -s "$pid" ] && pKill "$(<"$pid")"
-  rm -f "$pid"
 
   return 0
 }
 
 closeNetwork() {
 
-  if [[ "${WEB:-}" != [Nn]* && "$DHCP" == [Yy1]* ]]; then
+  if [[ "$DHCP" == [Yy1]* ]]; then
-    closeWeb
+
+    # Shutdown nginx
+    nginx -s stop 2> /dev/null
+    fWait "nginx"
+
   fi
 
   [[ "$NETWORK" == [Nn]* ]] && return 0
@@ -544,21 +341,6 @@ closeNetwork() {
   return 0
 }
 
-cleanUp() {
-
-  # Clean up old files
-  rm -f /etc/resolv.dnsmasq
-  rm -f /var/run/passt.pid
-  rm -f /var/run/dnsmasq.pid
-
-  if [[ -d "/sys/class/net/$VM_NET_TAP" ]]; then
-    info "Lingering interface will be removed..."
-    ip link delete "$VM_NET_TAP" || true
-  fi
-
-  return 0
-}
-
 checkOS() {
 
   local kernel
@@ -566,8 +348,8 @@ checkOS() {
   local if="macvlan"
   kernel=$(uname -a)
 
-  [[ "${kernel,,}" == *"darwin"* ]] && os="$ENGINE Desktop for macOS"
+  [[ "${kernel,,}" == *"darwin"* ]] && os="Docker Desktop for macOS"
-  [[ "${kernel,,}" == *"microsoft"* ]] && os="$ENGINE Desktop for Windows"
+  [[ "${kernel,,}" == *"microsoft"* ]] && os="Docker Desktop for Windows"
 
   if [[ "$DHCP" == [Yy1]* ]]; then
     if="macvtap"
@@ -599,66 +381,22 @@ getInfo() {
     error "$ADD_ERR -e \"VM_NET_DEV=NAME\" to specify another interface name." && exit 26
   fi
 
-  GATEWAY=$(ip route list dev "$VM_NET_DEV" | awk ' /^default/ {print $3}' | head -n 1)
+  BASE_IP="${VM_NET_IP%.*}."
-  { IP=$(ip address show dev "$VM_NET_DEV" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/ | head -n 1); rc=$?; } 2>/dev/null || :
 
-  if (( rc != 0 )); then
+  if [ "${VM_NET_IP/$BASE_IP/}" -lt "3" ]; then
-    error "Could not determine container IP address!" && exit 26
+    error "Invalid VM_NET_IP, must end in a higher number than .3" && exit 27
   fi
   
-  IP6=""
+  if [ -z "$MTU" ]; then
-  # shellcheck disable=SC2143
+    MTU=$(cat "/sys/class/net/$VM_NET_DEV/mtu")
-  if [ -f /proc/net/if_inet6 ] && [ -n "$(ifconfig -a | grep inet6)" ]; then
-    { IP6=$(ip -6 addr show dev "$VM_NET_DEV" scope global up); rc=$?; } 2>/dev/null || :
-    (( rc != 0 )) && IP6=""
-    [ -n "$IP6" ] && IP6=$(echo "$IP6" | sed -e's/^.*inet6 \([^ ]*\)\/.*$/\1/;t;d' | head -n 1)
   fi
 
-  local result nic bus
+  if [ "$MTU" -gt "1500" ]; then
-  result=$(ethtool -i "$VM_NET_DEV")
+    info "MTU size is too large: $MTU, ignoring..." && MTU="0"
-  nic=$(grep -m 1 -i 'driver:' <<< "$result" | awk '{print $(2)}')
-  bus=$(grep -m 1 -i 'bus-info:' <<< "$result" | awk '{print $(2)}')
-
-  if [[ "${bus,,}" != "" && "${bus,,}" != "n/a" && "${bus,,}" != "tap" ]]; then
-    [[ "$DEBUG" == [Yy1]* ]] && info "Detected BUS: $bus"
-    error "This container does not support host mode networking!"
-    exit 29
   fi
 
-  if [[ "$DHCP" == [Yy1]* ]]; then
-
-    checkOS
-
-    if [[ "${nic,,}" == "ipvlan" ]]; then
-      error "This container does not support IPVLAN networking when DHCP=Y."
-      exit 29
-    fi
-
-    if [[ "${nic,,}" != "macvlan" ]]; then
-      [[ "$DEBUG" == [Yy1]* ]] && info "Detected NIC: $nic"
-      error "The container needs to be in a MACVLAN network when DHCP=Y."
-      exit 29
-    fi
-
-  else
-
-    if [[ "$IP" != "172."* && "$IP" != "10.8"* && "$IP" != "10.9"* ]]; then
-      checkOS
-    fi
-
-  fi
-
-  local mtu=""
-
-  if [ -f "/sys/class/net/$VM_NET_DEV/mtu" ]; then
-    mtu=$(< "/sys/class/net/$VM_NET_DEV/mtu")
-  fi
-
-  [ -z "$MTU" ] && MTU="$mtu"
-  [ -z "$MTU" ] && MTU="0"
-
   if [[ "${ADAPTER,,}" != "virtio-net-pci" ]]; then
-    if [[ "$MTU" != "0" && "$MTU" != "1500" ]]; then
+    if [[ "$MTU" != "0" ]] && [[ "$MTU" != "1500" ]]; then
       warn "MTU size is $MTU, but cannot be set for $ADAPTER adapters!" && MTU="0"
     fi
   fi
@@ -686,28 +424,18 @@ getInfo() {
     error "Invalid MAC address: '$VM_NET_MAC', should be 12 or 17 digits long!" && exit 28
   fi
 
-  GATEWAY_MAC=$(echo "$VM_NET_MAC" | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:\1:\2:\3:\4:\5/')
+  GATEWAY=$(ip route list dev "$VM_NET_DEV" | awk ' /^default/ {print $3}' | head -n 1)
+  IP=$(ip address show dev "$VM_NET_DEV" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/ | head -n 1)
 
-  if [[ "$PODMAN" == [Yy1]* && "$DHCP" != [Yy1]* ]]; then
+  IP6=""
-    if [ -z "$NETWORK" ] || [[ "${NETWORK^^}" == "Y" ]]; then
+  # shellcheck disable=SC2143
-      # By default Podman has no permissions for NAT networking
+  if [ -f /proc/net/if_inet6 ] && [ -n "$(ifconfig -a | grep inet6)" ]; then
-      NETWORK="user"
+    IP6=$(ip -6 addr show dev "$VM_NET_DEV" scope global up)
-    fi
+    [ -n "$IP6" ] && IP6=$(echo "$IP6" | sed -e's/^.*inet6 \([^ ]*\)\/.*$/\1/;t;d' | head -n 1)
-  fi
-
-  if [[ "$DEBUG" == [Yy1]* ]]; then
-    line="Host: $HOST  IP: $IP  Gateway: $GATEWAY  Interface: $VM_NET_DEV  MAC: $VM_NET_MAC  MTU: $mtu"
-    [[ "$MTU" != "0" && "$MTU" != "$mtu" ]] && line+=" ($MTU)"
-    info "$line"
-    if [ -f /etc/resolv.conf ]; then
-      nameservers=$(grep '^nameserver*' /etc/resolv.conf | head -c -1 | sed 's/nameserver //g;' | sed -z 's/\n/, /g')
-      [ -n "$nameservers" ] && info "Nameservers: $nameservers"
-    fi
-    echo
   fi
 
+  [ -f "/run/.containerenv" ] && PODMAN="Y" || PODMAN="N"
   echo "$IP" > /run/shm/qemu.ip
-  echo "$nic" > /run/shm/qemu.nic
 
   return 0
 }
@@ -721,84 +449,84 @@ if [[ "$NETWORK" == [Nn]* ]]; then
   return 0
 fi
 
-msg="Initializing network..."
-html "$msg"
-[[ "$DEBUG" == [Yy1]* ]] && echo "$msg"
-
 getInfo
-cleanUp
+html "Initializing network..."
+
+if [[ "$DEBUG" == [Yy1]* ]]; then
+  mtu=$(cat "/sys/class/net/$VM_NET_DEV/mtu")
+  line="Host: $HOST  IP: $IP  Gateway: $GATEWAY  Interface: $VM_NET_DEV  MAC: $VM_NET_MAC  MTU: $mtu"
+  [[ "$MTU" != "0" ]] && [[ "$MTU" != "$mtu" ]] && line+=" ($MTU)"
+  info "$line"
+  if [ -f /etc/resolv.conf ]; then
+    nameservers=$(grep '^nameserver*' /etc/resolv.conf | head -c -1 | sed 's/nameserver //g;' | sed -z 's/\n/, /g')
+    [ -n "$nameservers" ] && info "Nameservers: $nameservers"
+  fi
+  echo
+fi
 
 if [[ "$IP" == "172.17."* ]]; then
   warn "your container IP starts with 172.17.* which will cause conflicts when you install the Container Manager package inside DSM!"
 fi
 
-MSG="Booting DSM instance..."
+if [[ -d "/sys/class/net/$VM_NET_TAP" ]]; then
-html "$MSG"
+  info "Lingering interface will be removed..."
+  ip link delete "$VM_NET_TAP" || true
+fi
 
 if [[ "$DHCP" == [Yy1]* ]]; then
 
+  checkOS
+
+  if [[ "$IP" == "172."* ]]; then
+    warn "container IP starts with 172.* which is often a sign that you are not on a macvlan network (required for DHCP)!"
+  fi
+
   # Configure for macvtap interface
   configureDHCP || exit 20
 
+  MSG="Booting DSM instance..."
+  html "$MSG"
+
 else
 
-  if [[ "${WEB:-}" != [Nn]* ]]; then
+  if [[ "$IP" != "172."* ]] && [[ "$IP" != "10.8"* ]] && [[ "$IP" != "10.9"* ]]; then
-    sleep 1.2
+    checkOS
-    closeWeb
   fi
 
-  case "${NETWORK,,}" in
+  # Shutdown nginx
-    "user"* | "passt" | "slirp" ) ;;
+  nginx -s stop 2> /dev/null
-    "nat" | "tap" | "tun" | "tuntap" | "y" )
+  fWait "nginx"
 
-      # Configure tap interface
+  if [[ "${NETWORK,,}" != "user"* ]]; then
-      if ! configureNAT; then
 
-        closeBridge
+    # Configure for tap interface
-        NETWORK="user"
+    if ! configureNAT; then
-        msg="falling back to user-mode networking!"
-        msg="failed to setup NAT networking, $msg"
 
-      fi ;;
+      closeBridge
+      NETWORK="user"
+      msg="falling back to user-mode networking!"
+      if [[ "$PODMAN" != [Yy1]* ]]; then
+        msg="an error occured, $msg"
+      else
+        msg="podman detected, $msg"
+      fi
+      warn "$msg"
+      [ -z "$USER_PORTS" ] && info "Notice: port mapping will not work without \"USER_PORTS\" now."
 
-  esac
+    fi
 
-  [[ "${NETWORK,,}" == "user"* ]] && NETWORK="passt"
+  fi
 
-  case "${NETWORK,,}" in
+  if [[ "${NETWORK,,}" == "user"* ]]; then
-    "nat" | "tap" | "tun" | "tuntap" | "y" ) ;;
-    "passt" )
 
-      # Configure for user-mode networking (passt)
+    # Configure for user-mode networking (slirp)
-      if ! configurePasst; then
+    configureUser || exit 24
-        error "Failed to configure user-mode networking!"
-        exit 24
-      fi ;;
 
-    "slirp" )
+  fi
-
-      # Configure for user-mode networking (slirp)
-      if ! configureSlirp; then
-        error "Failed to configure user-mode networking!"
-        exit 24
-      fi ;;
-
-    *)
-      error "Unrecognized NETWORK value: \"$NETWORK\"" && exit 24 ;;
-  esac
-
-  case "${NETWORK,,}" in
-    "passt" | "slirp" )
-
-      if [ -z "$USER_PORTS" ]; then
-        info "Notice: because user-mode networking is active, if you need to expose ports, add them to the \"USER_PORTS\" variable."
-      fi ;;
-
-  esac
 
 fi
 
 NET_OPTS+=" -device $ADAPTER,id=net0,netdev=hostnet0,romfile=,mac=$VM_NET_MAC"
-[[ "$MTU" != "0" && "$MTU" != "1500" ]] && NET_OPTS+=",host_mtu=$MTU"
+[[ "$MTU" != "0" ]] && [[ "$MTU" != "1500" ]] && NET_OPTS+=",host_mtu=$MTU"
 
 return 0

src/power.sh

@@ -1,15 +1,15 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
-: "${API_TIMEOUT:="50"}"   # API Call timeout
-: "${QEMU_TIMEOUT:="50"}"  # QEMU Termination timeout
-
 # Configure QEMU for graceful shutdown
 
 API_CMD=6
-API_HOST="127.0.0.1:$COM_PORT"
+API_HOST="127.0.0.1:2210"
+: "${API_TIMEOUT:="50"}" # API Call timeout
 
 QEMU_TERM=""
+QEMU_PORT=7100
+: "${QEMU_TIMEOUT:="50"}" # QEMU Termination timeout
 QEMU_DIR="/run/shm"
 QEMU_PID="$QEMU_DIR/qemu.pid"
 QEMU_LOG="$QEMU_DIR/qemu.log"
@@ -83,7 +83,7 @@ terminal() {
   fi
 
   if [ ! -c "$dev" ]; then
-    dev=$(echo 'info chardev' | nc -q 1 -w 1 localhost "$MON_PORT" | tr -d '\000')
+    dev=$(echo 'info chardev' | nc -q 1 -w 1 localhost "$QEMU_PORT" | tr -d '\000')
     dev="${dev#*serial0}"
     dev="${dev#*pty:}"
     dev="${dev%%$'\n'*}"
@@ -127,7 +127,7 @@ _graceful_shutdown() {
   fi
 
   # Don't send the powerdown signal because vDSM ignores ACPI signals
-  # echo 'system_powerdown' | nc -q 1 -w 1 localhost "$MON_PORT" > /dev/null
+  # echo 'system_powerdown' | nc -q 1 -w 1 localhost "${QEMU_PORT}" > /dev/null
 
   # Send shutdown command to guest agent via serial port
   url="http://$API_HOST/read?command=$API_CMD&timeout=$API_TIMEOUT"
@@ -172,7 +172,7 @@ _graceful_shutdown() {
 MON_OPTS="\
         -pidfile $QEMU_PID \
         -name $PROCESS,process=$PROCESS,debug-threads=on \
-        -monitor telnet:localhost:$MON_PORT,server,nowait,nodelay"
+        -monitor telnet:localhost:$QEMU_PORT,server,nowait,nodelay"
 
 if [[ "$CONSOLE" != [Yy]* ]]; then
 

src/print.sh

@@ -11,7 +11,6 @@ error () { printf "%b%s%b" "\E[1;31m❯ " "ERROR: $1" "\E[0m\n" >&2; }
 
 file="/run/shm/dsm.url"
 info="/run/shm/msg.html"
-driver="/run/shm/qemu.nic"
 page="/run/shm/index.html"
 address="/run/shm/qemu.ip"
 shutdown="/run/shm/qemu.end"
@@ -57,7 +56,11 @@ do
   (( rc != 0 )) && error "$jq_err $rc ( $json )" && continue
   [[ "$ip" == "null" ]] && error "$resp_err $json" && continue
 
-  [ -z "$ip" ] && continue
+  if [ -z "$ip" ]; then
+    [[ "$DHCP" == [Yy1]* ]] && continue
+    ip="20.20.20.21"
+  fi
+
   echo "$ip:$port" > $file
 
 done
@@ -66,7 +69,7 @@ done
 
 location=$(<"$file")
 
-if [[ "$DHCP" == [Yy1]* ]]; then
+if [[ "$location" != "20.20"* ]]; then
 
   msg="http://$location"
   title="<title>Virtual DSM</title>"
@@ -85,11 +88,10 @@ if [[ "$DHCP" == [Yy1]* ]]; then
 
 else
 
-  nic=$(<"$driver")
   ip=$(<"$address")
   port="${location##*:}"
 
-  if [[ "${nic,,}" != "macvlan" ]]; then
+  if [[ "$ip" == "172."* ]]; then
     msg="port $port"
   else
     msg="http://$ip:$port"

src/proc.sh

@@ -3,9 +3,11 @@ set -Eeuo pipefail
 
 # Docker environment variables
 
+: "${KVM:="Y"}"
 : "${HOST_CPU:=""}"
 : "${CPU_FLAGS:=""}"
 : "${CPU_MODEL:=""}"
+: "${DEF_MODEL:="qemu64"}"
 
 CLOCKSOURCE="tsc"
 [[ "${ARCH,,}" == "arm64" ]] && CLOCKSOURCE="arch_sys_counter"
@@ -25,7 +27,48 @@ else
   esac
 fi
 
-flags=$(sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo)
+if [[ "${ARCH,,}" != "amd64" ]]; then
+  KVM="N"
+  warn "your CPU architecture is ${ARCH^^} and cannot provide KVM acceleration for x64 instructions, this will cause a major loss of performance."
+fi
+
+if [[ "$KVM" != [Nn]* ]]; then
+
+  KVM_ERR=""
+
+  if [ ! -e /dev/kvm ]; then
+    KVM_ERR="(/dev/kvm is missing)"
+  else
+    if ! sh -c 'echo -n > /dev/kvm' &> /dev/null; then
+      KVM_ERR="(/dev/kvm is unwriteable)"
+    else
+      flags=$(sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo)
+      if ! grep -qw "vmx\|svm" <<< "$flags"; then
+        KVM_ERR="(not enabled in BIOS)"
+      fi
+    fi
+  fi
+
+  if [ -n "$KVM_ERR" ]; then
+    KVM="N"
+    if [[ "$OSTYPE" =~ ^darwin ]]; then
+      warn "you are using macOS which has no KVM support, this will cause a major loss of performance."
+    else      
+      kernel=$(uname -a)
+      case "${kernel,,}" in
+        *"microsoft"* )
+          error "Please bind '/dev/kvm' as a volume in the optional container settings when using Docker Desktop." ;;
+        *"synology"* )
+          error "Please make sure that Synology VMM (Virtual Machine Manager) is installed and that '/dev/kvm' is binded to this container." ;;
+        *)
+          error "KVM acceleration is not available $KVM_ERR, this will cause a major loss of performance."
+          error "See the FAQ for possible causes, or continue without it by adding KVM: \"N\" (not recommended)." ;;
+      esac
+      [[ "$DEBUG" != [Yy1]* ]] && exit 88
+    fi
+  fi
+
+fi
 
 if [[ "$KVM" != [Nn]* ]]; then
 
@@ -34,7 +77,7 @@ if [[ "$KVM" != [Nn]* ]]; then
 
   if ! grep -qw "sse4_2" <<< "$flags"; then
     info "Your CPU does not have the SSE4 instruction set that Virtual DSM requires, it will be emulated..."
-    [ -z "$CPU_MODEL" ] && CPU_MODEL="qemu64"
+    [ -z "$CPU_MODEL" ] && CPU_MODEL="$DEF_MODEL"
     CPU_FEATURES+=",+ssse3,+sse4.1,+sse4.2"
   fi
 
@@ -77,7 +120,7 @@ else
       CPU_MODEL="max"
       CPU_FEATURES+=",migratable=no"
     else
-      CPU_MODEL="qemu64"
+      CPU_MODEL="$DEF_MODEL"
     fi
   fi
 

src/progress.sh

@@ -25,7 +25,7 @@ do
   if [ -s "$file" ]; then
     bytes=$(du -sb "$file" | cut -f1)
     if (( bytes > 1000 )); then
-      if [ -z "$total" ] || [[ "$total" == "0" ]] || [ "$bytes" -gt "$total" ]; then
+      if [ -z "$total" ] || [[ "$total" == "0" ]]; then
         size=$(numfmt --to=iec --suffix=B "$bytes" | sed -r 's/([A-Z])/ \1/')
       else
         size="$(echo "$bytes" "$total" | awk '{printf "%.1f", $1 * 100 / $2}')"

src/reset.sh

@@ -2,15 +2,16 @@
 set -Eeuo pipefail
 
 trap 'error "Status $? while: $BASH_COMMAND (line $LINENO/$BASH_LINENO)"' ERR
-[[ "${TRACE:-}" == [Yy1]* ]] && set -o functrace && trap 'echo "# $BASH_COMMAND" >&2' DEBUG
 
-[ ! -f "/run/entry.sh" ] && error "Script must be run inside the container!" && exit 11
+[ ! -f "/run/entry.sh" ] && error "Script must run inside Docker container!" && exit 11
 [ "$(id -u)" -ne "0" ] && error "Script must be executed with root privileges." && exit 12
 
+echo "❯ Starting $APP for Docker v$(</run/version)..."
+echo "❯ For support visit $SUPPORT"
+
 # Docker environment variables
 
-: "${TZ:=""}"              # System timezone
+: "${TZ:=""}"              # System local timezone
-: "${KVM:="Y"}"            # KVM acceleration
 : "${DEBUG:="N"}"          # Disable debugging mode
 : "${COUNTRY:=""}"         # Country code for mirror
 : "${CONSOLE:="N"}"        # Disable console mode
@@ -24,23 +25,13 @@ trap 'error "Status $? while: $BASH_COMMAND (line $LINENO/$BASH_LINENO)"' ERR
 
 # Helper variables
 
-PODMAN="N"
-ENGINE="Docker"
 PROCESS="${APP,,}"
 PROCESS="${PROCESS// /-}"
 
-if [ -f "/run/.containerenv" ]; then
-  PODMAN="Y"
-  ENGINE="Podman"
-fi
-
-echo "❯ Starting $APP for $ENGINE v$(</run/version)..."
-echo "❯ For support visit $SUPPORT"
-
 INFO="/run/shm/msg.html"
 PAGE="/run/shm/index.html"
 TEMPLATE="/var/www/index.html"
-FOOTER1="$APP for $ENGINE v$(</run/version)"
+FOOTER1="$APP for Docker v$(</run/version)"
 FOOTER2="<a href='$SUPPORT'>$SUPPORT</a>"
 
 CPU=$(cpu)
@@ -57,15 +48,8 @@ else
   SOCKETS=$(lscpu | grep -m 1 -i 'socket(s)' | awk '{print $(2)}')
 fi
 
-CPU_CORES="${CPU_CORES// /}"
-[[ "${CPU_CORES,,}" == "max" ]] && CPU_CORES="$CORES"
 [ -n "${CPU_CORES//[0-9 ]}" ] && error "Invalid amount of CPU_CORES: $CPU_CORES" && exit 15
 
-if [ "$CPU_CORES" -gt "$CORES" ]; then
-  warn "The amount for CPU_CORES (${CPU_CORES}) exceeds the amount of physical cores, so will be limited to ${CORES}."
-  CPU_CORES="$CORES"
-fi
-
 # Check system
 
 if [ ! -d "/dev/shm" ]; then
@@ -92,7 +76,7 @@ fi
 # Check filesystem
 FS=$(stat -f -c %T "$STORAGE")
 
-if [[ "${FS,,}" == "ecryptfs" || "${FS,,}" == "tmpfs" ]]; then
+if [[ "${FS,,}" == "ecryptfs" ]] || [[ "${FS,,}" == "tmpfs" ]]; then
   DISK_IO="threads"
   DISK_CACHE="writeback"
 fi
@@ -105,12 +89,6 @@ RAM_TOTAL=$(free -b | grep -m 1 Mem: | awk '{print $2}')
 RAM_SIZE="${RAM_SIZE// /}"
 [ -z "$RAM_SIZE" ] && error "RAM_SIZE not specified!" && exit 16
 
-if [[ "${RAM_SIZE,,}" == "max" ]]; then
-  RAM_WANTED=$(( RAM_AVAIL - RAM_SPARE - RAM_SPARE ))
-  RAM_WANTED=$(( RAM_WANTED / 1073741825 ))
-  RAM_SIZE="${RAM_WANTED}G"
-fi
-
 if [ -z "${RAM_SIZE//[0-9. ]}" ]; then
   [ "${RAM_SIZE%%.*}" -lt "130" ] && RAM_SIZE="${RAM_SIZE}G" || RAM_SIZE="${RAM_SIZE}M"
 fi
@@ -142,63 +120,6 @@ if [[ "$RAM_CHECK" != [Nn]* ]] && (( (RAM_WANTED + RAM_SPARE) > RAM_AVAIL )); th
   info "$msg"
 fi
 
-# Check KVM support
-
-if [[ "${PLATFORM,,}" == "x64" ]]; then
-  TARGET="amd64"
-else
-  TARGET="arm64"
-fi
-
-if [[ "$KVM" == [Nn]* ]]; then
-  warn "KVM acceleration is disabled, this will cause the machine to run about 10 times slower!"
-else
-  if [[ "${ARCH,,}" != "$TARGET" ]]; then
-    KVM="N"
-    warn "your CPU architecture is ${ARCH^^} and cannot provide KVM acceleration for ${PLATFORM^^} instructions, so the machine will run about 10 times slower."
-  fi
-fi
-
-if [[ "$KVM" != [Nn]* ]]; then
-
-  KVM_ERR=""
-
-  if [ ! -e /dev/kvm ]; then
-    KVM_ERR="(/dev/kvm is missing)"
-  else
-    if ! sh -c 'echo -n > /dev/kvm' &> /dev/null; then
-      KVM_ERR="(/dev/kvm is unwriteable)"
-    else
-      if [[ "${PLATFORM,,}" == "x64" ]]; then
-        flags=$(sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo)
-        if ! grep -qw "vmx\|svm" <<< "$flags"; then
-          KVM_ERR="(not enabled in BIOS)"
-        fi
-      fi
-    fi
-  fi
-
-  if [ -n "$KVM_ERR" ]; then
-    KVM="N"
-    if [[ "$OSTYPE" =~ ^darwin ]]; then
-      warn "you are using macOS which has no KVM support, so the machine will run about 10 times slower."
-    else
-      kernel=$(uname -a)
-      case "${kernel,,}" in
-        *"microsoft"* )
-          error "Please bind '/dev/kvm' as a volume in the optional container settings when using Docker Desktop." ;;
-        *"synology"* )
-          error "Please make sure that Synology VMM (Virtual Machine Manager) is installed and that '/dev/kvm' is binded to this container." ;;
-        *)
-          error "KVM acceleration is not available $KVM_ERR, this will cause the machine to run about 10 times slower."
-          error "See the FAQ for possible causes, or disable acceleration by adding the \"KVM=N\" variable (not recommended)." ;;
-      esac
-      [[ "$DEBUG" != [Yy1]* ]] && exit 88
-    fi
-  fi
-
-fi
-
 # Cleanup files
 rm -f /run/shm/qemu.*
 rm -f /run/shm/dsm.url
@@ -207,4 +128,81 @@ rm -f /run/shm/dsm.url
 rm -rf /tmp/dsm
 rm -rf "$STORAGE/tmp"
 
+getCountry() {
+  local url=$1
+  local query=$2
+  local rc json result
+
+  { json=$(curl -m 5 -H "Accept: application/json" -sfk "$url"); rc=$?; } || :
+  (( rc != 0 )) && return 0
+
+  { result=$(echo "$json" | jq -r "$query" 2> /dev/null); rc=$?; } || :
+  (( rc != 0 )) && return 0
+
+  [[ ${#result} -ne 2 ]] && return 0
+  [[ "${result^^}" == "XX" ]] && return 0
+
+  COUNTRY="${result^^}"
+
+  return 0
+}
+
+setCountry() {
+
+  [[ "${TZ,,}" == "asia/harbin" ]] && COUNTRY="CN"
+  [[ "${TZ,,}" == "asia/beijing" ]] && COUNTRY="CN"
+  [[ "${TZ,,}" == "asia/urumqi" ]] && COUNTRY="CN"
+  [[ "${TZ,,}" == "asia/kashgar" ]] && COUNTRY="CN"
+  [[ "${TZ,,}" == "asia/shanghai" ]] && COUNTRY="CN"
+  [[ "${TZ,,}" == "asia/chongqing" ]] && COUNTRY="CN"
+
+  [ -z "$COUNTRY" ] && getCountry "https://api.ipapi.is" ".location.country_code"
+  [ -z "$COUNTRY" ] && getCountry "https://ifconfig.co/json" ".country_iso"
+  [ -z "$COUNTRY" ] && getCountry "https://api.ip2location.io" ".country_code"
+  [ -z "$COUNTRY" ] && getCountry "https://ipinfo.io/json" ".country"
+  [ -z "$COUNTRY" ] && getCountry "https://api.ipquery.io/?format=json" ".location.country_code" 
+  [ -z "$COUNTRY" ] && getCountry "https://api.myip.com" ".cc"
+
+  return 0
+}
+
+addPackage() {
+  local pkg=$1
+  local desc=$2
+
+  if apt-mark showinstall | grep -qx "$pkg"; then
+    return 0
+  fi
+
+  MSG="Installing $desc..."
+  info "$MSG" && html "$MSG"
+
+  [ -z "$COUNTRY" ] && setCountry
+
+  if [[ "${COUNTRY^^}" == "CN" ]]; then
+    sed -i 's/deb.debian.org/mirrors.ustc.edu.cn/g' /etc/apt/sources.list.d/debian.sources
+  fi
+
+  DEBIAN_FRONTEND=noninteractive apt-get -qq update
+  DEBIAN_FRONTEND=noninteractive apt-get -qq --no-install-recommends -y install "$pkg" > /dev/null
+
+  return 0
+}
+
+# shellcheck disable=SC2143
+if [ -f /proc/net/if_inet6 ] && [ -n "$(ifconfig -a | grep inet6)" ]; then
+
+  sed -i "s/listen 5000 default_server;/listen [::]:5000 default_server ipv6only=off;/g" /etc/nginx/sites-enabled/web.conf
+
+else
+
+  sed -i "s/listen [::]:5000 default_server ipv6only=off;/listen 5000 default_server;/g" /etc/nginx/sites-enabled/web.conf
+
+fi
+
+# Start webserver
+cp -r /var/www/* /run/shm
+html "Starting $APP for Docker..."
+nginx -e stderr
+
 return 0

src/serial.sh

@@ -45,7 +45,7 @@ fi
 cnt=0
 sleep 0.2
 
-while ! nc -z -w2 127.0.0.1 "$COM_PORT" > /dev/null 2>&1; do
+while ! nc -z -w2 127.0.0.1 2210 > /dev/null 2>&1; do
   sleep 0.1
   cnt=$((cnt + 1))
   (( cnt > 50 )) && error "Failed to connect to qemu-host.." && exit 58
@@ -53,7 +53,7 @@ done
 
 cnt=0
 
-while ! nc -z -w2 127.0.0.1 "$CHR_PORT" > /dev/null 2>&1; do
+while ! nc -z -w2 127.0.0.1 12345 > /dev/null 2>&1; do
   sleep 0.1
   cnt=$((cnt + 1))
   (( cnt > 50 )) && error "Failed to connect to qemu-host.." && exit 59
@@ -69,7 +69,7 @@ fi
 
 SERIAL_OPTS+=" \
         -device virtio-serial-pci,id=virtio-serial0,bus=pcie.0,addr=0x3 \
-        -chardev socket,id=charchannel0,host=127.0.0.1,port=$CHR_PORT,reconnect=10 \
+        -chardev socket,id=charchannel0,host=127.0.0.1,port=12345,reconnect=10 \
         -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=vchannel"
 
 return 0

src/server.sh

@@ -1,39 +0,0 @@
-#!/usr/bin/env bash
-set -Eeuo pipefail
-
-: "${COM_PORT:="2210"}"    # Comm port
-: "${MON_PORT:="7100"}"    # Monitor port
-: "${WEB_PORT:="5000"}"    # Webserver port
-: "${CHR_PORT:="12345"}"   # Character port
-: "${WSD_PORT:="8004"}"    # Websockets port
-
-cp -r /var/www/* /run/shm
-rm -f /var/run/websocketd.pid
-
-html "Starting $APP for $ENGINE..."
-
-if [[ "${WEB:-}" != [Nn]* ]]; then
-
-  mkdir -p /etc/nginx/sites-enabled
-  cp /etc/nginx/default.conf /etc/nginx/sites-enabled/web.conf
-
-  sed -i "s/listen 5000 default_server;/listen $WEB_PORT default_server;/g" /etc/nginx/sites-enabled/web.conf
-  sed -i "s/proxy_pass http:\/\/127.0.0.1:8004\/;/proxy_pass http:\/\/127.0.0.1:$WSD_PORT\/;/g" /etc/nginx/sites-enabled/web.conf
-
-  # shellcheck disable=SC2143
-  if [ -f /proc/net/if_inet6 ] && [ -n "$(ifconfig -a | grep inet6)" ]; then
-
-    sed -i "s/listen $WEB_PORT default_server;/listen [::]:$WEB_PORT default_server ipv6only=off;/g" /etc/nginx/sites-enabled/web.conf
-
-  fi
-
-  # Start webserver
-  nginx -e stderr
-
-  # Start websocket server
-  websocketd --address 127.0.0.1 --port="$WSD_PORT" /run/socket.sh >/var/log/websocketd.log &
-  echo "$!" > /var/run/websocketd.pid
-
-fi
-
-return 0

src/socket.sh

@@ -1,16 +0,0 @@
-#!/usr/bin/env bash
-set -Eeuo pipefail
-
-path="/run/shm/msg.html"
-
-if [ -f "$path" ] && [ -s "$path" ]; then
-  echo -n "s: " && cat "$path"
-fi
-
-inotifywait -m "$path" |
-  while read -r fp event fn; do
-    case "${event,,}" in
-      "modify"* ) echo -n "s: " && cat "$path" ;;
-      "delete_self" ) echo "c: vnc" ;;
-    esac    
-  done

src/start.sh

@@ -1,6 +0,0 @@
-#!/usr/bin/env bash
-set -Eeuo pipefail
-
-# You can override this hook to execute a script before startup!
-
-return 0

src/utils.sh

@@ -123,21 +123,34 @@ cpu() {
   fi
 
   cpu="${cpu// CPU/}"
-  cpu="${cpu// [0-9] Core}"
+  cpu="${cpu// 4 Core/}"
-  cpu="${cpu// [0-9][0-9] Core}"
+  cpu="${cpu// 6 Core/}"
-  cpu="${cpu// [0-9][0-9][0-9] Core}"
+  cpu="${cpu// 8 Core/}"
-  cpu="${cpu//[0-9]th Gen }"
+  cpu="${cpu// 10 Core/}"
-  cpu="${cpu//[0-9][0-9]th Gen }"
+  cpu="${cpu// 12 Core/}"
+  cpu="${cpu// 16 Core/}"
+  cpu="${cpu// 32 Core/}"
+  cpu="${cpu// 48 Core/}"
+  cpu="${cpu// 64 Core/}"
+  cpu="${cpu// 96 Core/}"
+  cpu="${cpu// 128 Core/}"
+  cpu="${cpu//7th Gen /}"
+  cpu="${cpu//8th Gen /}"
+  cpu="${cpu//9th Gen /}"
+  cpu="${cpu//10th Gen /}"
+  cpu="${cpu//11th Gen /}"
+  cpu="${cpu//12th Gen /}"
+  cpu="${cpu//13th Gen /}"
+  cpu="${cpu//14th Gen /}"
+  cpu="${cpu//15th Gen /}"
   cpu="${cpu// Processor/}"
   cpu="${cpu// Quad core/}"
   cpu="${cpu// Dual core/}"
   cpu="${cpu// Octa core/}"
-  cpu="${cpu// Hexa core/}"
   cpu="${cpu// Core TM/ Core}"
   cpu="${cpu// with Radeon Graphics/}"
   cpu="${cpu// with Radeon Vega Graphics/}"
   cpu="${cpu// with Radeon Vega Mobile Gfx/}"
-  cpu="${cpu// w Radeon [0-9][0-9][0-9]M Graphics/}"
 
   [ -z "${cpu// /}" ] && cpu="Unknown"
 
@@ -159,65 +172,4 @@ hasDisk() {
   return 1
 }
 
-getCountry() {
-  local url=$1
-  local query=$2
-  local rc json result
-
-  { json=$(curl -m 5 -H "Accept: application/json" -sfk "$url"); rc=$?; } || :
-  (( rc != 0 )) && return 0
-
-  { result=$(echo "$json" | jq -r "$query" 2> /dev/null); rc=$?; } || :
-  (( rc != 0 )) && return 0
-
-  [[ ${#result} -ne 2 ]] && return 0
-  [[ "${result^^}" == "XX" ]] && return 0
-
-  COUNTRY="${result^^}"
-
-  return 0
-}
-
-setCountry() {
-
-  [[ "${TZ,,}" == "asia/harbin" ]] && COUNTRY="CN"
-  [[ "${TZ,,}" == "asia/beijing" ]] && COUNTRY="CN"
-  [[ "${TZ,,}" == "asia/urumqi" ]] && COUNTRY="CN"
-  [[ "${TZ,,}" == "asia/kashgar" ]] && COUNTRY="CN"
-  [[ "${TZ,,}" == "asia/shanghai" ]] && COUNTRY="CN"
-  [[ "${TZ,,}" == "asia/chongqing" ]] && COUNTRY="CN"
-
-  [ -z "$COUNTRY" ] && getCountry "https://api.ipapi.is" ".location.country_code"
-  [ -z "$COUNTRY" ] && getCountry "https://ifconfig.co/json" ".country_iso"
-  [ -z "$COUNTRY" ] && getCountry "https://api.ip2location.io" ".country_code"
-  [ -z "$COUNTRY" ] && getCountry "https://ipinfo.io/json" ".country"
-  [ -z "$COUNTRY" ] && getCountry "https://api.ipquery.io/?format=json" ".location.country_code" 
-  [ -z "$COUNTRY" ] && getCountry "https://api.myip.com" ".cc"
-
-  return 0
-}
-
-addPackage() {
-  local pkg=$1
-  local desc=$2
-
-  if apt-mark showinstall | grep -qx "$pkg"; then
-    return 0
-  fi
-
-  MSG="Installing $desc..."
-  info "$MSG" && html "$MSG"
-
-  [ -z "$COUNTRY" ] && setCountry
-
-  if [[ "${COUNTRY^^}" == "CN" ]]; then
-    sed -i 's/deb.debian.org/mirrors.ustc.edu.cn/g' /etc/apt/sources.list.d/debian.sources
-  fi
-
-  DEBIAN_FRONTEND=noninteractive apt-get -qq update
-  DEBIAN_FRONTEND=noninteractive apt-get -qq --no-install-recommends -y install "$pkg" > /dev/null
-
-  return 0
-}
-
 return 0

web/conf/nginx.conf

@@ -27,18 +27,4 @@ server {
       index index.html;
 
     }
-
-    location /status {
-
-      proxy_http_version 1.1;
-
-      proxy_set_header Connection 'upgrade';
-      proxy_set_header Upgrade $http_upgrade;
-
-      proxy_buffering off;
-      proxy_read_timeout 3600s;
-      proxy_send_timeout 3600s;
-
-      proxy_pass http://127.0.0.1:8004/;
-    }    
 }

web/js/script.js

@@ -1,5 +1,4 @@
 var request;
-var booting = false;
 var interval = 1000;
 
 function getInfo() {
@@ -7,6 +6,7 @@ function getInfo() {
     var url = "msg.html";
 
     try {
+
         if (window.XMLHttpRequest) {
             request = new XMLHttpRequest();
         } else {
@@ -18,49 +18,22 @@ function getInfo() {
         request.send();
 
     } catch (e) {
-        setError("Error: " + e.message);
+        var err = "Error: " + e.message;
+        console.log(err);
+        setError(err);
     }
 }
 
-function getURL() {
-
-    var protocol = window.location.protocol === "https:" ? "wss:" : "ws:";
-    var path = window.location.pathname.replace(/[^/]*$/, '').replace(/\/$/, '');
-
-    return protocol + "//" + window.location.host + path;
-}
-
-function processMsg(msg) {
-
-    if (msg.toLowerCase().indexOf("href=") !== -1) {
-        var div = document.createElement("div");
-        div.innerHTML = msg;
-        var url = div.querySelector("a").href;
-        setTimeout(() => {
-            window.location.assign(url);
-        }, 3000);
-    }
-
-    setInfo(msg);
-    return true;
-}
-
 function processInfo() {
     try {
-
         if (request.readyState != 4) {
             return true;
         }
 
         var msg = request.responseText;
         if (msg == null || msg.length == 0) {
-
+            setInfo("Booting DSM instance", true);
-            if (booting) {
+            schedule();
-                schedule();
-                return true;
-            }
-
-            window.location.reload();
             return false;
         }
 
@@ -70,11 +43,20 @@ function processInfo() {
             if (msg.toLowerCase().indexOf("<html>") !== -1) {
                 notFound = true;
             } else {
-                processMsg(msg);
+                if (msg.toLowerCase().indexOf("href=") !== -1) {
-                if (msg.toLowerCase().indexOf("href=") == -1) {
+                    var div = document.createElement("div");
+                    div.innerHTML = msg;
+                    var url = div.querySelector("a").href;
+                    setTimeout(() => {
+                        window.location.assign(url);
+                    }, 3000);
+                    setInfo(msg);
+                    return true;
+                } else {
+                    setInfo(msg);
                     schedule();
+                    return true;
                 }
-                return true;
             }
         }
 
@@ -85,60 +67,44 @@ function processInfo() {
         }
 
         setError("Error: Received statuscode " + request.status);
+        schedule();
         return false;
 
     } catch (e) {
-        setError("Error: " + e.message);
+        var err = "Error: " + e.message;
+        console.log(err);
+        setError(err);
         return false;
     }
 }
 
-function extractContent(s) {
-    var span = document.createElement('span');
-    span.innerHTML = s;
-    return span.textContent || span.innerText;
-};
-
 function setInfo(msg, loading, error) {
-    try {
 
+    try {
         if (msg == null || msg.length == 0) {
             return false;
         }
 
-        if (msg.includes("Booting ")) {
+        var el = document.getElementById("spinner");
-            booting = true;
-        }
-
-        var el = document.getElementById("info");
-
-        if (el.innerText == msg || el.innerHTML == msg) {
-            return true;
-        }
-
-        var spin = document.getElementById("spinner");
 
         error = !!error;
         if (!error) {
-            spin.style.visibility = 'visible';
+            el.style.visibility = 'visible';
         } else {
-            spin.style.visibility = 'hidden';
+            el.style.visibility = 'hidden';
         }
 
-        var p = "<p class=\"loading\">";
         loading = !!loading;
         if (loading) {
-            msg = p + msg + "</p>";
+            msg = "<p class=\"loading\">" + msg + "</p>";
         }
 
-        if (msg.includes(p)) {
+        el = document.getElementById("info");
-            if (el.innerHTML.includes(p)) {
+
-                el.getElementsByClassName('loading')[0].textContent = extractContent(msg);
+        if (el.innerHTML != msg) {
-                return true;
+            el.innerHTML = msg;
-            }
         }
 
-        el.innerHTML = msg;
         return true;
 
     } catch (e) {
@@ -148,7 +114,6 @@ function setInfo(msg, loading, error) {
 }
 
 function setError(text) {
-    console.warn(text);
     return setInfo(text, false, true);
 }
 
@@ -158,47 +123,8 @@ function schedule() {
 
 function reload() {
     setTimeout(() => {
-        window.location.reload();
+        document.location.reload();
     }, 3000);
 }
 
-function connect() {
-
-    var wsUrl = getURL() + "/status";
-    var ws = new WebSocket(wsUrl);
-
-    ws.onmessage = function(e) {
-
-        var pos = e.data.indexOf(":");
-        var cmd = e.data.substring(0, pos);
-        var msg = e.data.substring(pos + 2);
-
-        switch (cmd) {
-            case "s":
-                processMsg(msg);
-                break;
-            case "e":
-                setError(msg);
-                break;
-            default:
-                console.warn("Unknown event: " + cmd);
-                break;
-        }
-    };
-
-    ws.onclose = function(e) {
-        setTimeout(function() {
-            connect();
-        }, interval);
-    };
-
-    ws.onerror = function(e) {
-        ws.close();
-        if (!booting) {
-            window.location.reload();
-        }
-    };
-}
-
 schedule();
-connect();