fix: Port forwarding (#525)

* fix: Port forwarding

Dockerfile

@@ -44,12 +44,7 @@ COPY --from=builder /qemu-host.bin /run/host.bin
 RUN chmod +x /run/*.sh && chmod +x /run/*.bin
 
 VOLUME /storage
-
+EXPOSE 22 80 139 445 5000
-EXPOSE 22
-EXPOSE 80
-EXPOSE 139
-EXPOSE 445
-EXPOSE 5000
 
 ENV RAM_SIZE "1G"
 ENV DISK_SIZE "16G"

src/check.sh

@@ -1,12 +1,12 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
-: ${VM_NET_DEV:='eth0'}
+[ -f "/run/qemu.end" ] && echo "QEMU is shutting down.." && exit 1
-
+[ ! -f "/run/qemu.pid" ] && echo "QEMU is not running yet.." && exit 0
-[ -f "/run/qemu.count" ] && echo "QEMU is shutting down.." && exit 1
-[ ! -f "/run/qemu.pid" ] && echo "QEMU not running yet.." && exit 0
 
 file="/run/dsm.url"
+address="/run/qemu.ip"
+
 [ ! -f  "$file" ] && echo "DSM has not enabled networking yet.." && exit 1
 
 location=$(cat "$file")
@@ -19,7 +19,7 @@ if ! curl -m 20 -ILfSs "http://$location/" > /dev/null; then
     echo "Failed to reach DSM at port $port"
   else
     echo "Failed to reach DSM at http://$location"
-    ip=$(ip address show dev "$VM_NET_DEV" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/)
+    ip="$(cat "$address")"
   fi
 
   echo "You might need to whitelist IP $ip in the DSM firewall." && exit 1

src/config.sh

@@ -1,20 +1,15 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
-DEF_OPTS="-nographic -nodefaults -boot strict=on -display none"
+DEF_OPTS="-nodefaults -boot strict=on"
 RAM_OPTS=$(echo "-m $RAM_SIZE" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
 CPU_OPTS="-cpu $CPU_MODEL -smp $CPU_CORES,sockets=1,dies=1,cores=$CPU_CORES,threads=1"
 MAC_OPTS="-machine type=q35,usb=off,dump-guest-core=off,hpet=off${KVM_OPTS}"
-EXTRA_OPTS="-device virtio-balloon-pci,id=balloon0,bus=pcie.0,addr=0x4"
+DEV_OPTS="-device virtio-balloon-pci,id=balloon0,bus=pcie.0,addr=0x4"
-EXTRA_OPTS="$EXTRA_OPTS -object rng-random,id=objrng0,filename=/dev/urandom"
+DEV_OPTS="$DEV_OPTS -object rng-random,id=objrng0,filename=/dev/urandom"
-EXTRA_OPTS="$EXTRA_OPTS -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pcie.0,addr=0x1c"
+DEV_OPTS="$DEV_OPTS -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pcie.0,addr=0x1c"
 
-if [[ "$GPU" == [Yy1]* ]] && [[ "$ARCH" == "amd64" ]]; then
+ARGS="$DEF_OPTS $CPU_OPTS $RAM_OPTS $MAC_OPTS $DISPLAY_OPTS $MON_OPTS $SERIAL_OPTS $NET_OPTS $DISK_OPTS $DEV_OPTS $ARGUMENTS"
-  DEF_OPTS="-nodefaults -boot strict=on -display egl-headless,rendernode=/dev/dri/renderD128"
-  DEF_OPTS="$DEF_OPTS -device virtio-vga,id=video0,max_outputs=1,bus=pcie.0,addr=0x1"
-fi
-
-ARGS="$DEF_OPTS $CPU_OPTS $RAM_OPTS $MAC_OPTS $MON_OPTS $SERIAL_OPTS $NET_OPTS $DISK_OPTS $EXTRA_OPTS $ARGUMENTS"
 ARGS=$(echo "$ARGS" | sed 's/\t/ /g' | tr -s ' ')
 
 return 0

src/disk.sh

@@ -5,10 +5,10 @@ set -Eeuo pipefail
 
 : ${DISK_IO:='native'}          # I/O Mode, can be set to 'native', 'threads' or 'io_turing'
 : ${DISK_FMT:='raw'}            # Disk file format, 'raw' by default for best performance
+: ${DISK_FLAGS:=''}             # Specifies the options for use with the qcow2 disk format
 : ${DISK_CACHE:='none'}         # Caching mode, can be set to 'writeback' for better performance
 : ${DISK_DISCARD:='on'}         # Controls whether unmap (TRIM) commands are passed to the host.
 : ${DISK_ROTATION:='1'}         # Rotation rate, set to 1 for SSD storage and increase for HDD
-: ${DISK_FLAGS:=''}             # Specifies the options for use with the qcow2 disk format
 
 BOOT="$STORAGE/$BASE.boot.img"
 SYSTEM="$STORAGE/$BASE.system.img"
@@ -17,11 +17,11 @@ SYSTEM="$STORAGE/$BASE.system.img"
 [ ! -f "$SYSTEM" ] && error "Virtual DSM system-image does not exist ($SYSTEM)" && exit 82
 
 DISK_OPTS="\
-    -object iothread,id=io1 -object iothread,id=io2 \
+    -object iothread,id=io2 \
-    -device virtio-scsi-pci,id=hw-synoboot,iothread=io1,bus=pcie.0,addr=0xa \
+    -device virtio-scsi-pci,id=hw-synoboot,iothread=io2,bus=pcie.0,addr=0xa \
     -drive file=$BOOT,if=none,id=drive-synoboot,format=raw,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on \
     -device scsi-hd,bus=hw-synoboot.0,channel=0,scsi-id=0,lun=0,drive=drive-synoboot,id=synoboot0,rotation_rate=$DISK_ROTATION,bootindex=1 \
-    -device virtio-scsi-pci,id=hw-synosys,iothread=io1,bus=pcie.0,addr=0xb \
+    -device virtio-scsi-pci,id=hw-synosys,iothread=io2,bus=pcie.0,addr=0xb \
     -drive file=$SYSTEM,if=none,id=drive-synosys,format=raw,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on \
     -device scsi-hd,bus=hw-synosys.0,channel=0,scsi-id=0,lun=0,drive=drive-synosys,id=synosys0,rotation_rate=$DISK_ROTATION,bootindex=2"
 

src/display.sh

@@ -1,10 +1,27 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
+# Docker environment variables
+
+: ${GPU:='N'}           # GPU passthrough
+: ${DISPLAY:='none'}  # Display type
+
+case "${DISPLAY,,}" in
+  vnc)
+    DISPLAY_OPTS="-display vnc=:0 -vga virtio"
+    ;;
+  *)
+    DISPLAY_OPTS="-display $DISPLAY -vga none"
+    ;;
+esac
+
 if [[ "$GPU" != [Yy1]* ]] || [[ "$ARCH" != "amd64" ]]; then
   return 0
 fi
 
+DISPLAY_OPTS="-display egl-headless,rendernode=/dev/dri/renderD128 -vga virtio"
+[[ "${DISPLAY,,}" == "vnc" ]] && DISPLAY_OPTS="$DISPLAY_OPTS -vnc :0"
+
 [ ! -d /dev/dri ] && mkdir -m 755 /dev/dri
 
 if [ ! -c /dev/dri/card0 ]; then

src/entry.sh

@@ -9,9 +9,9 @@ cd /run
 . reset.sh      # Initialize system
 . install.sh    # Run installation
 . disk.sh       # Initialize disks
+. display.sh    # Initialize graphics
 . network.sh    # Initialize network
-. gpu.sh        # Initialize graphics
+. proc.sh       # Initialize processor
-. cpu.sh        # Initialize processor
 . serial.sh     # Initialize serialport
 . power.sh      # Configure shutdown
 . config.sh     # Configure arguments
@@ -19,15 +19,14 @@ cd /run
 trap - ERR
 
 if [[ "$CONSOLE" == [Yy]* ]]; then
-  exec qemu-system-x86_64 -pidfile "$QEMU_PID" ${ARGS:+ $ARGS}
+  exec qemu-system-x86_64 ${ARGS:+ $ARGS}
-  exit $?
 fi
 
 [[ "$DEBUG" == [Yy1]* ]] && info "$VERS" && set -x
-qemu-system-x86_64 -daemonize -pidfile "$QEMU_PID" ${ARGS:+ $ARGS}
+msg=$(qemu-system-x86_64 ${ARGS:+ $ARGS})
 
-{ set +x; } 2>/dev/null
+{ set +x; } 2>/dev/null && terminal "$msg"
-cat /dev/pts/1 2>/dev/null & wait $! || true
+tail -fn +0 "$QEMU_LOG" 2>/dev/null &
+cat "$QEMU_TERM" 2>/dev/null & wait $! || true
 
-sleep 1
+sleep 1 && finish 0
-finish 0

src/network.sh

@@ -4,10 +4,11 @@ set -Eeuo pipefail
 # Docker environment variables
 
 : ${DHCP:='N'}
+: ${HOST_PORTS:=''}
 : ${MAC:='02:11:32:AA:BB:CC'}
 
+: ${VM_NET_DEV:=''}
 : ${VM_NET_TAP:='dsm'}
-: ${VM_NET_DEV:='eth0'}
 : ${VM_NET_MAC:="$MAC"}
 : ${VM_NET_HOST:='VirtualDSM'}
 
@@ -69,7 +70,7 @@ configureDHCP() {
   return 0
 }
 
-configureDNS () {
+configureDNS() {
 
   # dnsmasq configuration:
   DNSMASQ_OPTS="$DNSMASQ_OPTS --dhcp-range=$VM_NET_IP,$VM_NET_IP --dhcp-host=$VM_NET_MAC,,$VM_NET_IP,$VM_NET_HOST,infinite --dhcp-option=option:netmask,255.255.255.0"
@@ -90,7 +91,61 @@ configureDNS () {
   return 0
 }
 
-configureNAT () {
+getPorts() {
+
+  local list=$1
+  local args=""
+  local vnc="5900"
+
+  list="${list//,/ }"
+  list="${list## }"
+  list="${list%% }"
+
+  if [[ "${DISPLAY,,}" == "vnc" ]] && [[ "$list" != *"$vnc"* ]]; then
+    if [ -z "$list" ]; then
+      list="$vnc"
+    else
+      list="$list $vnc"
+    fi
+  fi
+
+  if [ -n "$list" ]; then
+    if [[ "$list" != *" "* ]]; then
+      args=" ! --dport $list"
+    else
+      args=" -m multiport ! --dports "
+      for port in $list; do
+        args="${args}${port},"
+      done
+      args="${args%?}"
+    fi
+  fi
+
+  echo "$args"
+  return 0
+}
+
+configureNAT() {
+
+  # Create the necessary file structure for /dev/net/tun
+  if [ ! -c /dev/net/tun ]; then
+    [ ! -d /dev/net ] && mkdir -m 755 /dev/net
+    if mknod /dev/net/tun c 10 200; then
+      chmod 666 /dev/net/tun
+    fi
+  fi
+
+  if [ ! -c /dev/net/tun ]; then
+    error "TUN device missing. $ADD_ERR --cap-add NET_ADMIN" && exit 25
+  fi
+
+  # Check port forwarding flag
+  if [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
+    { sysctl -w net.ipv4.ip_forward=1 ; rc=$?; } || :
+    if (( rc != 0 )); then
+      error "IP forwarding is disabled. $ADD_ERR --sysctl net.ipv4.ip_forward=1" && exit 24
+    fi
+  fi
 
   # Create a bridge with a static IP for the VM guest
 
@@ -121,8 +176,14 @@ configureNAT () {
   ip link set dev "$VM_NET_TAP" master dockerbridge
 
   # Add internet connection to the VM
+  update-alternatives --set iptables /usr/sbin/iptables-legacy > /dev/null
+  update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy > /dev/null
+
+  exclude="$(getPorts "$HOST_PORTS")"
+
   iptables -t nat -A POSTROUTING -o "$VM_NET_DEV" -j MASQUERADE
-  iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p tcp  -j DNAT --to "$VM_NET_IP"
+  # shellcheck disable=SC2086
+  iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p tcp${exclude} -j DNAT --to "$VM_NET_IP"
   iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p udp  -j DNAT --to "$VM_NET_IP"
 
   if (( KERNEL > 4 )); then
@@ -133,14 +194,6 @@ configureNAT () {
   { set +x; } 2>/dev/null
   [[ "$DEBUG" == [Yy1]* ]] && echo
 
-  # Check port forwarding flag
-  if [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
-    { sysctl -w net.ipv4.ip_forward=1 ; rc=$?; } || :
-    if (( rc != 0 )); then
-      error "IP forwarding is disabled. $ADD_ERR --sysctl net.ipv4.ip_forward=1" && exit 24
-    fi
-  fi
-
   NET_OPTS="-netdev tap,ifname=$VM_NET_TAP,script=no,downscript=no,id=hostnet0"
 
   { exec 40>>/dev/vhost-net; rc=$?; } 2>/dev/null || :
@@ -151,7 +204,7 @@ configureNAT () {
   return 0
 }
 
-closeNetwork () {
+closeNetwork() {
 
   exec 30<&- || true
   exec 40<&- || true
@@ -174,6 +227,38 @@ closeNetwork () {
     ip link delete dockerbridge || true
 
   fi
+
+  return 0
+}
+
+getInfo() {
+
+  if [ -z "$VM_NET_DEV" ]; then
+    # Automaticly detect the default network interface
+    VM_NET_DEV=$(awk '$2 == 00000000 { print $1 }' /proc/net/route)
+    [ -z "$VM_NET_DEV" ] && VM_NET_DEV="eth0"
+  fi
+
+  if [ ! -d "/sys/class/net/$VM_NET_DEV" ]; then
+    error "Network interface '$VM_NET_DEV' does not exist inside the container!"
+    error "$ADD_ERR -e \"VM_NET_DEV=NAME\" to specify another interface name." && exit 27
+  fi
+
+  VM_NET_MAC="${VM_NET_MAC//-/:}"
+  if [[ ${#VM_NET_MAC} == 12 ]]; then
+    m="$VM_NET_MAC"
+    VM_NET_MAC="${m:0:2}:${m:2:2}:${m:4:2}:${m:6:2}:${m:8:2}:${m:10:2}"
+  fi
+
+  if [[ ${#VM_NET_MAC} != 17 ]]; then
+    error "Invalid mac address: '$VM_NET_MAC', should be 12 or 17 digits long!" && exit 28
+  fi
+
+  GATEWAY=$(ip r | grep default | awk '{print $3}')
+  IP=$(ip address show dev "$VM_NET_DEV" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/)
+  echo "$IP" > /run/qemu.ip
+
+  return 0
 }
 
 # ######################################
@@ -182,34 +267,16 @@ closeNetwork () {
 
 fKill "server.sh"
 
-# Create the necessary file structure for /dev/net/tun
-if [ ! -c /dev/net/tun ]; then
-  [ ! -d /dev/net ] && mkdir -m 755 /dev/net
-  if mknod /dev/net/tun c 10 200; then
-    chmod 666 /dev/net/tun
-  fi
-fi
-
-if [ ! -c /dev/net/tun ]; then
-  error "TUN device missing. $ADD_ERR --cap-add NET_ADMIN" && exit 25
-fi
-
-# Create the necessary file structure for /dev/vhost-net
 if [ ! -c /dev/vhost-net ]; then
   if mknod /dev/vhost-net c 10 238; then
     chmod 660 /dev/vhost-net
   fi
 fi
 
-update-alternatives --set iptables /usr/sbin/iptables-legacy > /dev/null
+getInfo
-update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy > /dev/null
-
-VM_NET_MAC="${VM_NET_MAC//-/:}"
-GATEWAY=$(ip r | grep default | awk '{print $3}')
-IP=$(ip address show dev "$VM_NET_DEV" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/)
 
 if [[ "$DEBUG" == [Yy1]* ]]; then
-  info "Container IP is $IP with gateway $GATEWAY" && echo
+  info "Container IP is $IP with gateway $GATEWAY on interface $VM_NET_DEV" && echo
 fi
 
 if [[ "$DHCP" == [Yy1]* ]]; then

src/power.sh

@@ -7,10 +7,12 @@ API_CMD=6
 API_TIMEOUT=50
 API_HOST="127.0.0.1:2210"
 
+QEMU_TERM=""
 QEMU_PORT=7100
 QEMU_TIMEOUT=50
 QEMU_PID="/run/qemu.pid"
-QEMU_COUNT="/run/qemu.count"
+QEMU_LOG="/run/qemu.log"
+QEMU_END="/run/qemu.end"
 
 if [[ "$KVM" == [Nn]* ]]; then
   API_TIMEOUT=$(( API_TIMEOUT*2 ))
@@ -18,7 +20,9 @@ if [[ "$KVM" == [Nn]* ]]; then
 fi
 
 rm -f "$QEMU_PID"
-rm -f "$QEMU_COUNT"
+rm -f "$QEMU_LOG"
+rm -f "$QEMU_END"
+touch "$QEMU_LOG"
 
 _trap() {
   func="$1" ; shift
@@ -35,7 +39,7 @@ finish() {
   if [ -f "$QEMU_PID" ]; then
 
     pid="$(cat "$QEMU_PID")"
-    echo && error "Forcefully quitting QEMU process, reason: $reason..."
+    echo && error "Forcefully terminating QEMU process, reason: $reason..."
     { kill -15 "$pid" || true; } 2>/dev/null
 
     while isAlive "$pid"; do
@@ -51,20 +55,53 @@ finish() {
   closeNetwork
 
   sleep 1
-  echo && info "Shutdown completed!"
+  echo && echo "❯ Shutdown completed!"
 
   exit "$reason"
 }
 
+terminal() {
+
+  local msg=$1
+
+  if [[ "${msg,,}" != "char"* ||  "$msg" != *"serial0)" ]]; then
+    echo "$msg"
+  fi
+
+  local dev="${msg#*/dev/p}"
+  dev="/dev/p${dev%% *}"
+
+  if [ ! -c "$dev" ]; then
+    dev=$(echo 'info chardev' | nc -q 1 -w 1 localhost "$QEMU_PORT" | tr -d '\000')
+    dev="${dev#*serial0}"
+    dev="${dev#*pty:}"
+    dev="${dev%%$'\n'*}"
+    dev="${dev%%$'\r'*}"
+  fi
+
+  if [ ! -c "$dev" ]; then
+    error "Device '$dev' not found!"
+    finish 34 && return 34
+  fi
+
+  QEMU_TERM="$dev"
+  return 0
+}
+
 _graceful_shutdown() {
 
+  local cnt=0
   local code=$?
-  local pid cnt response
+  local pid url response
-
-  [ -f "$QEMU_COUNT" ] && return
-  echo 0 > "$QEMU_COUNT"
 
   set +e
+
+  if [ -f "$QEMU_END" ]; then
+    echo && info "Received $1 signal while already shutting down..."
+    return
+  fi
+
+  touch "$QEMU_END"
   echo && info "Received $1 signal, sending shutdown command..."
 
   if [ ! -f "$QEMU_PID" ]; then
@@ -94,20 +131,17 @@ _graceful_shutdown() {
 
     response="${response#*message\"\: \"}"
     [ -z "$response" ] && response="second signal"
-    echo && error "Forcefully quitting because of: ${response%%\"*}"
+    echo && error "Forcefully terminating because of: ${response%%\"*}"
     { kill -15 "$pid" || true; } 2>/dev/null
 
   fi
 
-  while [ "$(cat $QEMU_COUNT)" -lt "$QEMU_TIMEOUT" ]; do
+  while [ "$cnt" -lt "$QEMU_TIMEOUT" ]; do
 
     ! isAlive "$pid" && break
 
     sleep 1
-
+    cnt=$((cnt+1))
-    # Increase the counter
-    cnt=$(($(cat $QEMU_COUNT)+1))
-    echo $cnt > "$QEMU_COUNT"
 
     [[ "$DEBUG" == [Yy1]* ]] && info "Shutting down, waiting... ($cnt/$QEMU_TIMEOUT)"
 
@@ -116,13 +150,23 @@ _graceful_shutdown() {
 
   done
 
-  if [ "$(cat $QEMU_COUNT)" -ge "$QEMU_TIMEOUT" ]; then
+  if [ "$cnt" -ge "$QEMU_TIMEOUT" ]; then
-    echo && error "Shutdown timeout reached!"
+    echo && error "Shutdown timeout reached, aborting..."
   fi
 
   finish "$code" && return "$code"
 }
 
-_trap _graceful_shutdown SIGTERM SIGHUP SIGINT SIGABRT SIGQUIT
+MON_OPTS="\
+        -pidfile $QEMU_PID \
+        -monitor telnet:localhost:$QEMU_PORT,server,nowait,nodelay"
 
-MON_OPTS="-monitor telnet:localhost:$QEMU_PORT,server,nowait,nodelay"
+if [[ "$CONSOLE" != [Yy]* ]]; then
+
+  MON_OPTS="$MON_OPTS -daemonize -D $QEMU_LOG"
+
+  _trap _graceful_shutdown SIGTERM SIGHUP SIGINT SIGABRT SIGQUIT
+
+fi
+
+return 0

src/print.sh

@@ -2,16 +2,17 @@
 set -Eeuo pipefail
 
 : ${DHCP:='N'}
-: ${VM_NET_DEV:='eth0'}
 
 info () { printf "%b%s%b" "\E[1;34m❯ \E[1;36m" "$1" "\E[0m\n" >&2; }
 error () { printf "%b%s%b" "\E[1;31m❯ " "ERROR: $1" "\E[0m\n" >&2; }
 
 file="/run/dsm.url"
-shutdown="/run/qemu.count"
+address="/run/qemu.ip"
+shutdown="/run/qemu.end"
 url="http://127.0.0.1:2210/read?command=10"
 
 resp_err="Guest returned an invalid response:"
+curl_err="Failed to connect to guest: curl error"
 jq_err="Failed to parse response from guest: jq error"
 
 while [ ! -f  "$file" ]
@@ -29,7 +30,7 @@ do
   { json=$(curl -m 20 -sk "$url"); rc=$?; } || :
 
   [ -f "$shutdown" ] && exit 1
-  (( rc != 0 )) && error "Failed to connect to guest: curl error $rc" && continue
+  (( rc != 0 )) && error "$curl_err $rc" && continue
 
   { result=$(echo "$json" | jq -r '.status'); rc=$?; } || :
   (( rc != 0 )) && error "$jq_err $rc ( $json )" && continue
@@ -68,7 +69,7 @@ if [[ "$location" != "20.20"* ]]; then
 
 else
 
-  ip=$(ip address show dev "$VM_NET_DEV" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/)
+  ip="$(cat "$address")"
   port="${location##*:}"
 
   if [[ "$ip" == "172."* ]]; then

src/proc.sh

@@ -3,6 +3,7 @@ set -Eeuo pipefail
 
 # Docker environment variables
 
+: ${KVM:='Y'}
 : ${HOST_CPU:=''}
 : ${CPU_MODEL:='host'}
 : ${CPU_FEATURES:='+ssse3,+sse4.1,+sse4.2'}

src/reset.sh

@@ -12,8 +12,6 @@ trap 'error "Status $? while: $BASH_COMMAND (line $LINENO/$BASH_LINENO)"' ERR
 # Docker environment variables
 
 : ${TZ:=''}             # System local timezone
-: ${GPU:='N'}           # Disable GPU passthrough
-: ${KVM:='Y'}           # Enable KVM acceleration
 : ${DEBUG:='N'}         # Disable debugging mode
 : ${COUNTRY:=''}        # Country code for mirror
 : ${CONSOLE:='N'}       # Disable console mode
@@ -38,8 +36,10 @@ STORAGE="/storage"
 # Cleanup files
 
 rm -f /run/dsm.url
+rm -f /run/qemu.ip
+rm -f /run/qemu.log
 rm -f /run/qemu.pid
-rm -f /run/qemu.count
+rm -f /run/qemu.end
 
 # Cleanup dirs
 
@@ -71,7 +71,7 @@ pKill() {
   return 0
 }
 
-fKill () {
+fKill() {
   local name=$1
 
   { pkill -f "$name" || true; } 2>/dev/null
@@ -83,7 +83,7 @@ fKill () {
   return 0
 }
 
-getCountry () {
+getCountry() {
   local url=$1
   local query=$2
   local rc json result
@@ -102,7 +102,7 @@ getCountry () {
   return 0
 }
 
-setCountry () {
+setCountry() {
 
   [[ "${TZ,,}" == "asia/harbin" ]] && COUNTRY="CN"
   [[ "${TZ,,}" == "asia/beijing" ]] && COUNTRY="CN"
@@ -119,7 +119,7 @@ setCountry () {
   return 0
 }
 
-addPackage () {
+addPackage() {
   local pkg=$1
   local desc=$2
 

src/serial.sh

@@ -47,8 +47,7 @@ done
 # Configure serial ports
 
 SERIAL_OPTS="\
-        -chardev pty,id=charserial0 \
+        -serial pty \
-        -device isa-serial,chardev=charserial0,id=serial0 \
         -device virtio-serial-pci,id=virtio-serial0,bus=pcie.0,addr=0x3 \
         -chardev socket,id=charchannel0,host=127.0.0.1,port=12345,reconnect=10 \
         -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=vchannel"