fix: Podman detection (#990)

.devcontainer.json

@@ -0,0 +1,6 @@
+{
+  "name": "dsm",
+  "service": "dsm",
+  "forwardPorts": [5000],
+  "dockerComposeFile": "compose.yml"
+}

.github/ISSUE_TEMPLATE/1-issue.yml

@@ -21,6 +21,7 @@ body:
     attributes:
       label: Docker compose
       description: The compose file (or otherwise the `docker run` command used).
+      render: yaml
     validations:
       required: true
   - type: textarea
@@ -28,6 +29,7 @@ body:
     attributes:
       label: Docker log
       description: The logfile of the container (as shown by `docker logs dsm`).
+      render: shell
     validations:
       required: true
   - type: textarea

.github/ISSUE_TEMPLATE/3-bug.yml

@@ -23,6 +23,7 @@ body:
     attributes:
       label: Docker compose
       description: The compose file (or otherwise the `docker run` command used).
+      render: yaml
     validations:
       required: true
   - type: textarea
@@ -30,6 +31,7 @@ body:
     attributes:
       label: Docker log
       description: The logfile of the container (as shown by `docker logs dsm`).
+      render: shell
     validations:
       required: true
   - type: textarea

.github/workflows/check.yml

@@ -20,5 +20,5 @@ jobs:
         uses: hadolint/hadolint-action@v3.1.0
         with:
           dockerfile: Dockerfile
-          ignore: DL3008,DL3003,DL3006
+          ignore: DL3008,DL3003,DL3006,DL3013
           failure-threshold: warning

Dockerfile

@@ -15,19 +15,21 @@ ARG DEBCONF_NOWARNINGS="yes"
 ARG DEBIAN_FRONTEND="noninteractive"
 ARG DEBCONF_NONINTERACTIVE_SEEN="true"
 
-RUN set -eu && extra="" && \
-    if [ "$TARGETPLATFORM" != "linux/amd64" ]; then extra="qemu-user"; fi && \
+RUN set -eu && \
     apt-get update && \
     apt-get --no-install-recommends -y install \
         jq \
         tini \
         curl \
-        cpio \
         wget \
         fdisk \
         unzip \
         nginx \
         procps \
+        python3 \
+        python3-pip \
+        python3-msgpack \
+        python3-pysodium \
         xz-utils \
         iptables \
         iproute2 \
@@ -40,9 +42,9 @@ RUN set -eu && extra="" && \
         iputils-ping \
         ca-certificates \
         netcat-openbsd \
-        qemu-system-x86 \
-        "$extra" && \
+        qemu-system-x86 && \
     apt-get clean && \
+    pip3 install --no-cache-dir --break-system-packages --root-user-action=ignore dissect.cstruct && \
     mkdir -p /etc/qemu && \
     echo "allow br0" > /etc/qemu/bridge.conf && \
     unlink /etc/nginx/sites-enabled/default && \
@@ -54,13 +56,14 @@ COPY --chmod=755 ./src /run/
 COPY --chmod=755 ./web /var/www/
 COPY --chmod=755 --from=builder /qemu-host.bin /run/host.bin
 COPY --chmod=744 ./web/conf/nginx.conf /etc/nginx/sites-enabled/web.conf
+ADD --chmod=775 https://raw.githubusercontent.com/sud0woodo/patology/refs/heads/main/patology.py /run/extract.py
 
 VOLUME /storage
 EXPOSE 22 139 445 5000
 
-ENV RAM_SIZE="1G"
+ENV RAM_SIZE="2G"
+ENV CPU_CORES="2"
 ENV DISK_SIZE="16G"
-ENV CPU_CORES="1"
 
 HEALTHCHECK --interval=60s --start-period=45s --retries=2 CMD /run/check.sh
 

readme.md

@@ -22,7 +22,7 @@ Virtual DSM in a Docker container.
  
 ## Usage  🐳
 
-Via Docker Compose:
+##### Via Docker Compose:
 
 ```yaml
 services:
@@ -44,27 +44,21 @@ services:
     stop_grace_period: 2m
 ```
 
-Via Docker CLI:
+##### Via Docker CLI:
 
 ```bash
-docker run -it --rm --name dsm -p 5000:5000 --device=/dev/kvm --device=/dev/net/tun --cap-add NET_ADMIN -v ${PWD:-.}/dsm:/storage --stop-timeout 120 vdsm/virtual-dsm
+docker run -it --rm --name dsm -p 5000:5000 --device=/dev/kvm --device=/dev/net/tun --cap-add NET_ADMIN -v "${PWD:-.}/dsm:/storage" --stop-timeout 120 vdsm/virtual-dsm
 ```
 
-Via Kubernetes:
+##### Via Kubernetes:
 
 ```shell
 kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/master/kubernetes.yml
 ```
 
-## Compatibility ⚙️
+##### Via Github Codespaces:
 
-| **Product**  | **Platform**   | |
-|---|---|---|
-| Docker Engine | Linux| ✅ |
-| Docker Desktop | Linux | ❌ |
-| Docker Desktop | macOS | ❌ |
-| Docker Desktop | Windows 11 | ✅ |
-| Docker Desktop | Windows 10 | ❌ |
+[![Open in GitHub Codespaces](https://github.com/codespaces/badge.svg)](https://codespaces.new/vdsm/virtual-dsm)
 
 ## FAQ 💬
 
@@ -72,9 +66,11 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
   Very simple! These are the steps:
   
-  - Start the container and connect to [port 5000](http://localhost:5000) using your web browser.
+  - Start the container and connect to [port 5000](http://127.0.0.1:5000/) using your web browser.
 
-  - Wait until DSM is ready, choose an username and password, and you will be taken to the desktop.
+  - Wait until DSM finishes its installation
+ 
+  - Choose an username and password, and you will be taken to the desktop.
   
   Enjoy your brand new NAS, and don't forget to star this repo!
 
@@ -103,7 +99,7 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
 ### How do I create a growable disk?
 
-  By default, the entire capacity of the disk is reserved in advance.
+  By default, the entire capacity of the disk will be reserved in advance.
 
   To create a growable disk that only allocates space that is actually used, add the following environment variable:
 
@@ -127,24 +123,19 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
 ### How do I pass-through a disk?
 
-   It is possible to pass-through a disk device directly, by adding it to your compose file in this way:
+   It is possible to pass-through disk devices or partitions directly by adding them to your compose file in this way:
 
   ```yaml
   devices:
-    - /dev/disk/by-uuid/12345-12345-12345-12345-12345:/disk2
+    - /dev/sdb:/disk1
+    - /dev/sdc1:/disk2
   ```
 
-  Make sure to bind the disk via its UUID (obtainable via `lsblk -o name,uuid`) instead of its name (`/dev/sdc`), to prevent ever binding the wrong disk when the drive letters happen to change. 
-
-> [!IMPORTANT]
-> The device needs to be totally empty (without any partition table) otherwise DSM does not always format it into a volume.
-
-> [!CAUTION]
-> Do NOT use this feature with the goal of sharing files from the host, they will all be lost without warning when DSM creates the volume.
+  Make sure it is totally empty (without any filesystem), otherwise DSM may not format it as a volume.
 
 ### How do I change the amount of CPU or RAM?
 
-  By default, the container will be allowed to use a maximum of 1 CPU core and 1 GB of RAM.
+  By default, the container will be allowed to use a maximum of 2 CPU cores and 2 GB of RAM.
 
   If you want to adjust this, you can specify the desired amount using the following environment variables:
 
@@ -156,9 +147,16 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
 ### How do I verify if my system supports KVM?
 
-  Only Linux and Windows 11 support KVM virtualization, macOS and Windows 10 do not unfortunately.
-  
-  You can run the following commands in Linux to check your system:
+  First check if your software is compatible using this chart:
+
+  | **Product**  | **Linux** | **Win11** | **Win10** | **macOS** |
+  |---|---|---|---|---|
+  | Docker CLI        | ✅   | ✅       | ❌        | ❌ |
+  | Docker Desktop    | ❌   | ✅       | ❌        | ❌ | 
+  | Podman CLI        | ✅   | ✅       | ❌        | ❌ | 
+  | Podman Desktop    | ✅   | ✅       | ❌        | ❌ | 
+
+  After that you can run the following commands in Linux to check your system:
 
   ```bash
   sudo apt install cpu-checker
@@ -173,11 +171,7 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
   - you are not using a cloud provider, as most of them do not allow nested virtualization for their VPS's.
 
-  If you do not receive any error from `kvm-ok` but the container still complains about KVM, please check whether:
-
-  - you are not using "Docker Desktop for Linux" as it does not support KVM, instead make use of Docker Engine directly.
- 
-  - it could help to add `privileged: true` to your compose file (or `sudo` to your `docker run` command), to rule out any permission issue.
+  If you did not receive any error from `kvm-ok` but the container still complains about a missing KVM device, it could help to add `privileged: true` to your compose file (or `sudo` to your `docker` command) to rule out any permission issue.
 
 ### How do I assign an individual IP address to the container?
 
@@ -256,19 +250,27 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
   With this method, it is even possible to switch back and forth between versions while keeping your file data intact.
 
-  If you don't have internet access, it's also possible to skip the download by setting URL to:
-
+  Alternatively, you can also skip the download and use a local file instead, by binding it in your compose file in this way:
+  
   ```yaml
-  environment:
-    URL: "DSM_VirtualDSM_42218.pat"
+  volumes:
+    - ./DSM_VirtualDSM_42218.pat:/boot.pat
   ```
 
-  after placing a copy of [DSM_VirtualDSM_42218.pat](https://global.synologydownload.com/download/DSM/release/7.0.1/42218/DSM_VirtualDSM_42218.pat) in the root of your `/storage` folder.
+  Replace the example path `./DSM_VirtualDSM_42218.pat` with the filename of your desired `.pat` file. The value of `URL` will be ignored in this case.
 
 ### What are the differences compared to the standard DSM?
 
   There are only two minor differences: the Virtual Machine Manager package is not available, and Surveillance Station will not include any free licenses.
-  
+
+### How do I run Windows in a container?
+
+  You can use [dockur/windows](https://github.com/dockur/windows) for that. It shares many of the same features, and even has completely automatic installation.
+
+### How do I run a Linux desktop in a container?
+
+  You can use [qemus/qemu](https://github.com/qemus/qemu) in that case.
+
 ### Is this project legal?
 
   Yes, this project contains only open-source code and does not distribute any copyrighted material. Neither does it try to circumvent any copyright protection measures. So under all applicable laws, this project will be considered legal. 

src/config.sh

@@ -17,21 +17,27 @@ ARGS=$(echo "$ARGS" | sed 's/\t/ /g' | tr -s ' ')
 if [[ "$RAM_CHECK" != [Nn]* ]]; then
 
   RAM_AVAIL=$(free -b | grep -m 1 Mem: | awk '{print $7}')
-  AVAIL_GB=$(( RAM_AVAIL/1073741824 ))
+  AVAIL_MEM=$(formatBytes "$RAM_AVAIL")
 
   if (( (RAM_WANTED + RAM_SPARE) > RAM_AVAIL )); then
-    error "Your configured RAM_SIZE of $WANTED_GB GB is too high for the $AVAIL_GB GB of memory available, please set a lower value."
-    exit 17
-  fi
-
-  if (( (RAM_WANTED + (RAM_SPARE * 3)) > RAM_AVAIL )); then
-    warn "your configured RAM_SIZE of $WANTED_GB GB is very close to the $AVAIL_GB GB of memory available, please consider a lower value."
+    msg="Your configured RAM_SIZE of ${RAM_SIZE/G/ GB} is too high for the $AVAIL_MEM of memory available, please set a lower value."
+    [[ "${FS,,}" != "zfs" ]] && error "$msg" && exit 17
+    info "$msg"
+  else
+    if (( (RAM_WANTED + (RAM_SPARE * 3)) > RAM_AVAIL )); then
+      msg="your configured RAM_SIZE of ${RAM_SIZE/G/ GB} is very close to the $AVAIL_MEM of memory available, please consider a lower value."
+      if [[ "${FS,,}" != "zfs" ]]; then
+        warn "$msg"
+      else
+        info "$msg"
+      fi
+    fi
   fi
 
 fi
 
 if [[ "$DEBUG" == [Yy1]* ]]; then
-  printf "Arguments:\n\n%s" "${ARGS// -/$'\n-'}" && echo
+  printf "Arguments:\n\n%s\n\n" "${ARGS// -/$'\n-'}"
 fi
 
 return 0

src/disk.sh

@@ -96,7 +96,7 @@ createDisk() {
   local DISK_DESC=$3
   local DISK_FMT=$4
   local FS=$5
-  local DATA_SIZE DIR SPACE FA
+  local DATA_SIZE DIR SPACE GB FA
 
   DATA_SIZE=$(numfmt --from=iec "$DISK_SPACE")
 
@@ -109,16 +109,16 @@ createDisk() {
     SPACE=$(df --output=avail -B 1 "$DIR" | tail -n 1)
 
     if (( DATA_SIZE > SPACE )); then
-      local SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-      error "Not enough free space to create a $DISK_DESC of $DISK_SPACE in $DIR, it has only $SPACE_GB GB available..."
+      GB=$(formatBytes "$SPACE")
+      error "Not enough free space to create a $DISK_DESC of ${DISK_SPACE/G/ GB} in $DIR, it has only $GB available..."
       error "Please specify a smaller ${DISK_DESC^^}_SIZE or disable preallocation by setting ALLOCATE=N." && exit 76
     fi
   fi
 
   html "Creating a $DISK_DESC image..."
-  info "Creating a $DISK_SPACE $DISK_STYLE $DISK_DESC image in $DISK_FMT format..."
+  info "Creating a ${DISK_SPACE/G/ GB} $DISK_STYLE $DISK_DESC image in $DISK_FMT format..."
 
-  local FAIL="Could not create a $DISK_STYLE $DISK_FMT $DISK_DESC image of $DISK_SPACE ($DISK_FILE)"
+  local FAIL="Could not create a $DISK_STYLE $DISK_FMT $DISK_DESC image of ${DISK_SPACE/G/ GB} ($DISK_FILE)"
 
   case "${DISK_FMT,,}" in
     raw)
@@ -141,10 +141,12 @@ createDisk() {
       else
 
         # Create an empty file
-        if ! fallocate -l "$DATA_SIZE" "$DISK_FILE"; then
-          if ! truncate -s "$DATA_SIZE" "$DISK_FILE"; then
-            rm -f "$DISK_FILE"
-            error "$FAIL" && exit 77
+        if ! fallocate -l "$DATA_SIZE" "$DISK_FILE" &>/dev/null; then
+          if ! fallocate -l -x "$DATA_SIZE" "$DISK_FILE"; then
+            if ! truncate -s "$DATA_SIZE" "$DISK_FILE"; then
+              rm -f "$DISK_FILE"
+              error "$FAIL" && exit 77
+            fi
           fi
         fi
 
@@ -180,7 +182,7 @@ resizeDisk() {
   local DISK_DESC=$3
   local DISK_FMT=$4
   local FS=$5
-  local CUR_SIZE DATA_SIZE DIR SPACE
+  local CUR_SIZE DATA_SIZE DIR SPACE GB
 
   CUR_SIZE=$(getSize "$DISK_FILE")
   DATA_SIZE=$(numfmt --from=iec "$DISK_SPACE")
@@ -194,17 +196,17 @@ resizeDisk() {
     SPACE=$(df --output=avail -B 1 "$DIR" | tail -n 1)
 
     if (( REQ > SPACE )); then
-      local SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-      error "Not enough free space to resize $DISK_DESC to $DISK_SPACE in $DIR, it has only $SPACE_GB GB available.."
+      GB=$(formatBytes "$SPACE")
+      error "Not enough free space to resize $DISK_DESC to ${DISK_SPACE/G/ GB} in $DIR, it has only $GB available.."
       error "Please specify a smaller ${DISK_DESC^^}_SIZE or disable preallocation by setting ALLOCATE=N." && exit 74
     fi
   fi
 
-  local GB=$(( (CUR_SIZE + 1073741823)/1073741824 ))
-  MSG="Resizing $DISK_DESC from ${GB}G to $DISK_SPACE..."
+  GB=$(formatBytes "$CUR_SIZE")
+  MSG="Resizing $DISK_DESC from $GB to ${DISK_SPACE/G/ GB}..."
   info "$MSG" && html "$MSG"
 
-  local FAIL="Could not resize the $DISK_STYLE $DISK_FMT $DISK_DESC image from ${GB}G to $DISK_SPACE ($DISK_FILE)"
+  local FAIL="Could not resize the $DISK_STYLE $DISK_FMT $DISK_DESC image from ${GB} to ${DISK_SPACE/G/ GB} ($DISK_FILE)"
 
   case "${DISK_FMT,,}" in
     raw)
@@ -219,9 +221,11 @@ resizeDisk() {
       else
 
         # Resize file by allocating more space
-        if ! fallocate -l "$DATA_SIZE" "$DISK_FILE"; then
-          if ! truncate -s "$DATA_SIZE" "$DISK_FILE"; then
-            error "$FAIL" && exit 75
+        if ! fallocate -l "$DATA_SIZE" "$DISK_FILE" &>/dev/null; then
+          if ! fallocate -l -x "$DATA_SIZE" "$DISK_FILE"; then
+            if ! truncate -s "$DATA_SIZE" "$DISK_FILE"; then
+              error "$FAIL" && exit 75
+            fi
           fi
         fi
 
@@ -257,7 +261,7 @@ convertDisk() {
 
   if [[ "$ALLOCATE" != [Nn]* ]]; then
 
-    local DIR CUR_SIZE SPACE
+    local DIR CUR_SIZE SPACE GB
 
     # Check free diskspace
     DIR=$(dirname "$TMP_FILE")
@@ -265,8 +269,8 @@ convertDisk() {
     SPACE=$(df --output=avail -B 1 "$DIR" | tail -n 1)
 
     if (( CUR_SIZE > SPACE )); then
-      local SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-      error "Not enough free space to convert $DISK_DESC to $DST_FMT in $DIR, it has only $SPACE_GB GB available..."
+      GB=$(formatBytes "$SPACE")
+      error "Not enough free space to convert $DISK_DESC to $DST_FMT in $DIR, it has only $GB available..."
       error "Please free up some disk space or disable preallocation by setting ALLOCATE=N." && exit 76
     fi
   fi
@@ -296,8 +300,10 @@ convertDisk() {
     if [[ "$ALLOCATE" != [Nn]* ]]; then
       # Work around qemu-img bug
       CUR_SIZE=$(stat -c%s "$TMP_FILE")
-      if ! fallocate -l "$CUR_SIZE" "$TMP_FILE"; then
+      if ! fallocate -l "$CUR_SIZE" "$TMP_FILE" &>/dev/null; then
+        if ! fallocate -l -x "$CUR_SIZE" "$TMP_FILE"; then
           error "Failed to allocate $CUR_SIZE bytes for $DISK_DESC image $TMP_FILE"
+        fi
       fi
     fi
   fi
@@ -314,7 +320,7 @@ convertDisk() {
 
   msg="Conversion of $DISK_DESC"
   html "$msg completed..."
-  info "$msg to $DST_FMT completed succesfully!"
+  info "$msg to $DST_FMT completed successfully!"
 
   return 0
 }
@@ -362,6 +368,8 @@ createDevice () {
   local DISK_FMT=$5
   local DISK_IO=$6
   local DISK_CACHE=$7
+  local DISK_SERIAL=$8
+  local DISK_SECTORS=$9
   local DISK_ID="data$DISK_INDEX"
 
   local index=""
@@ -369,35 +377,35 @@ createDevice () {
   local result=" -drive file=$DISK_FILE,id=$DISK_ID,format=$DISK_FMT,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on"
 
   case "${DISK_TYPE,,}" in
-    "none" ) ;;  
+    "none" ) ;;
     "auto" )
       echo "$result"
       ;;
     "usb" )
       result+=",if=none \
-      -device usb-storage,drive=${DISK_ID}${index}"
+      -device usb-storage,drive=${DISK_ID}${index}${DISK_SERIAL}${DISK_SECTORS}"
       echo "$result"
       ;;
     "nvme" )
       result+=",if=none \
-      -device nvme,drive=${DISK_ID}${index},serial=deadbeaf${DISK_INDEX}"
+      -device nvme,drive=${DISK_ID}${index},serial=deadbeaf${DISK_INDEX}${DISK_SERIAL}${DISK_SECTORS}"
       echo "$result"
-      ;;      
+      ;;
     "ide" | "sata" )
       result+=",if=none \
       -device ich9-ahci,id=ahci${DISK_INDEX},addr=$DISK_ADDRESS \
-      -device ide-hd,drive=${DISK_ID},bus=ahci$DISK_INDEX.0,rotation_rate=$DISK_ROTATION${index}"
+      -device ide-hd,drive=${DISK_ID},bus=ahci$DISK_INDEX.0,rotation_rate=$DISK_ROTATION${index}${DISK_SERIAL}${DISK_SECTORS}"
       echo "$result"
       ;;
     "blk" | "virtio-blk" )
       result+=",if=none \
-      -device virtio-blk-pci,drive=${DISK_ID},bus=pcie.0,addr=$DISK_ADDRESS,iothread=io2${index}"
+      -device virtio-blk-pci,drive=${DISK_ID},bus=pcie.0,addr=$DISK_ADDRESS,iothread=io2${index}${DISK_SERIAL}${DISK_SECTORS}"
       echo "$result"
       ;;
     "scsi" | "virtio-scsi" )
       result+=",if=none \
       -device virtio-scsi-pci,id=${DISK_ID}b,bus=pcie.0,addr=$DISK_ADDRESS,iothread=io2 \
-      -device scsi-hd,drive=${DISK_ID},bus=${DISK_ID}b.0,channel=0,scsi-id=0,lun=0,rotation_rate=$DISK_ROTATION${index}"
+      -device scsi-hd,drive=${DISK_ID},bus=${DISK_ID}b.0,channel=0,scsi-id=0,lun=0,rotation_rate=$DISK_ROTATION${index}${DISK_SERIAL}${DISK_SECTORS}"
       echo "$result"
       ;;
   esac
@@ -416,7 +424,7 @@ addDisk () {
   local DISK_FMT=$7
   local DISK_IO=$8
   local DISK_CACHE=$9
-  local DISK_EXT DIR DATA_SIZE FS PREV_FMT PREV_EXT CUR_SIZE
+  local DISK_EXT DIR SPACE DATA_SIZE FS PREV_FMT PREV_EXT CUR_SIZE
 
   DISK_EXT=$(fmt2ext "$DISK_FMT")
   local DISK_FILE="$DISK_BASE.$DISK_EXT"
@@ -424,15 +432,16 @@ addDisk () {
   DIR=$(dirname "$DISK_FILE")
   [ ! -d "$DIR" ] && return 0
 
-  [ -z "$DISK_SPACE" ] && DISK_SPACE="16G"
-  DISK_SPACE=$(echo "${DISK_SPACE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
-  [[ -z "${DISK_SPACE//[0-9]}" ]] && DISK_SPACE="${DISK_SPACE}G"
+  SPACE="${DISK_SPACE// /}"
+  [ -z "$SPACE" ] && SPACE="16G"
+  [ -z "${SPACE//[0-9. ]}" ] && SPACE="${SPACE}G"
+  SPACE=$(echo "${SPACE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
 
-  if ! numfmt --from=iec "$DISK_SPACE" &>/dev/null; then
+  if ! numfmt --from=iec "$SPACE" &>/dev/null; then
     error "Invalid value for ${DISK_DESC^^}_SIZE: $DISK_SPACE" && exit 73
   fi
 
-  DATA_SIZE=$(numfmt --from=iec "$DISK_SPACE")
+  DATA_SIZE=$(numfmt --from=iec "$SPACE")
 
   if (( DATA_SIZE < 6442450944 )); then
     error "Please increase ${DISK_DESC^^}_SIZE to at least 6 GB." && exit 73
@@ -466,16 +475,16 @@ addDisk () {
     CUR_SIZE=$(getSize "$DISK_FILE")
 
     if (( DATA_SIZE > CUR_SIZE )); then
-      resizeDisk "$DISK_FILE" "$DISK_SPACE" "$DISK_DESC" "$DISK_FMT" "$FS" || exit $?
+      resizeDisk "$DISK_FILE" "$SPACE" "$DISK_DESC" "$DISK_FMT" "$FS" || exit $?
     fi
 
   else
 
-    createDisk "$DISK_FILE" "$DISK_SPACE" "$DISK_DESC" "$DISK_FMT" "$FS" || exit $?
+    createDisk "$DISK_FILE" "$SPACE" "$DISK_DESC" "$DISK_FMT" "$FS" || exit $?
 
   fi
 
-  DISK_OPTS+=$(createDevice "$DISK_FILE" "$DISK_TYPE" "$DISK_INDEX" "$DISK_ADDRESS" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE")
+  DISK_OPTS+=$(createDevice "$DISK_FILE" "$DISK_TYPE" "$DISK_INDEX" "$DISK_ADDRESS" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE" "" "")
 
   return 0
 }
@@ -490,7 +499,26 @@ addDevice () {
   [ -z "$DISK_DEV" ] && return 0
   [ ! -b "$DISK_DEV" ] && error "Device $DISK_DEV cannot be found! Please add it to the 'devices' section of your compose file." && exit 55
 
-  DISK_OPTS+=$(createDevice "$DISK_DEV" "$DISK_TYPE" "$DISK_INDEX" "$DISK_ADDRESS" "raw" "$DISK_IO" "$DISK_CACHE")
+  local sectors=""
+  local result logical physical
+  result=$(fdisk -l "$DISK_DEV" | grep -m 1 -o "(logical/physical): .*" | cut -c 21-)
+  logical="${result%% *}"
+  physical=$(echo "$result" | grep -m 1 -o "/ .*" | cut -c 3-)
+  physical="${physical%% *}"
+
+  if [ -n "$physical" ]; then
+    if [[ "$physical" == "512" ]] || [[ "$physical" == "4096" ]]; then
+      if [[ "$physical" == "4096" ]]; then
+        sectors=",logical_block_size=$logical,physical_block_size=$physical"
+      fi
+    else
+      warn "Unknown physical sector size: $physical for $DISK_DEV"
+    fi
+  else
+    warn "Failed to determine the sector size for $DISK_DEV"
+  fi
+
+  DISK_OPTS+=$(createDevice "$DISK_DEV" "$DISK_TYPE" "$DISK_INDEX" "$DISK_ADDRESS" "raw" "$DISK_IO" "$DISK_CACHE" "" "$sectors")
 
   return 0
 }
@@ -522,8 +550,8 @@ else
   DISK_ALLOC="preallocation=falloc"
 fi
 
-DISK_OPTS+=$(createDevice "$BOOT" "$DISK_TYPE" "1" "0xa" "raw" "$DISK_IO" "$DISK_CACHE")
-DISK_OPTS+=$(createDevice "$SYSTEM" "$DISK_TYPE" "2" "0xb" "raw" "$DISK_IO" "$DISK_CACHE")
+DISK_OPTS+=$(createDevice "$BOOT" "$DISK_TYPE" "1" "0xa" "raw" "$DISK_IO" "$DISK_CACHE" "" "")
+DISK_OPTS+=$(createDevice "$SYSTEM" "$DISK_TYPE" "2" "0xb" "raw" "$DISK_IO" "$DISK_CACHE" "" "")
 
 DISK1_FILE="$STORAGE/${DISK_NAME}"
 if [[ ! -f "$DISK1_FILE.img" ]] && [[ -f "$STORAGE/data${DISK_SIZE}.img" ]]; then

src/display.sh

@@ -8,7 +8,9 @@ set -Eeuo pipefail
 : "${DISPLAY:="none"}"  # Display type
 : "${RENDERNODE:="/dev/dri/renderD128"}"  # Render node
 
-if [[ "$GPU" != [Yy1]* ]] || [[ "$ARCH" != "amd64" ]]; then
+CPU_VENDOR=$(lscpu | awk '/Vendor ID/{print $3}')
+
+if [[ "$GPU" != [Yy1]* ]] || [[ "$CPU_VENDOR" != "GenuineIntel" ]] || [[ "$ARCH" != "amd64" ]]; then
 
   [[ "${DISPLAY,,}" == "none" ]] && VGA="none"
   DISPLAY_OPTS="-display $DISPLAY -vga $VGA"

src/entry.sh

@@ -6,6 +6,7 @@ set -Eeuo pipefail
 
 cd /run
 
+. utils.sh      # Load functions
 . reset.sh      # Initialize system
 . install.sh    # Run installation
 . disk.sh       # Initialize disks

src/install.sh

@@ -5,25 +5,38 @@ set -Eeuo pipefail
 
 if [ -f "$STORAGE/dsm.ver" ]; then
   BASE=$(<"$STORAGE/dsm.ver")
+  BASE="${BASE//[![:print:]]/}"
   [ -z "$BASE" ] && BASE="DSM_VirtualDSM_69057"
 else
   # Fallback for old installs
   BASE="DSM_VirtualDSM_42962"
 fi
 
-if [ -n "$URL" ]; then
+FN="boot.pat"
+DIR=$(find / -maxdepth 1 -type d -iname "$FN" -print -quit)
+[ ! -d "$DIR" ] && DIR=$(find "$STORAGE" -maxdepth 1 -type d -iname "$FN" -print -quit)
+
+if [ -d "$DIR" ]; then
+  BASE="DSM_VirtualDSM" && URL="file://$DIR" 
+  if [[ ! -s "$STORAGE/$BASE.boot.img" ]] || [[ ! -s "$STORAGE/$BASE.system.img" ]]; then
+    error "The bind $DIR maps to a file that does not exist!" && exit 65
+  fi
+fi
+
+FILE=$(find / -maxdepth 1 -type f -iname "$FN" -print -quit)
+[ ! -s "$FILE" ] && FILE=$(find "$STORAGE" -maxdepth 1 -type f -iname "$FN" -print -quit)
+[ -s "$FILE" ] && BASE="DSM_VirtualDSM" && URL="file://$FILE" 
+
+if [ -n "$URL" ] && [ ! -s "$FILE" ] && [ ! -d "$DIR" ]; then
   BASE=$(basename "$URL" .pat)
   if [ ! -s "$STORAGE/$BASE.system.img" ]; then
     BASE=$(basename "${URL%%\?*}" .pat)
     : "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
     BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
   fi
-  if [[ "${URL,,}" != "http"* ]]; then
-    if [ -s "$STORAGE/$BASE.pat" ]; then
-      URL="file://$STORAGE/$BASE.pat"
-    else
-      error "File $STORAGE/$BASE.pat does not exist!" && exit 65
-    fi
+  if [[ "${URL,,}" != "http"* ]] && [[ "${URL,,}" != "file:"* ]] ; then
+    [ ! -s "$STORAGE/$BASE.pat" ] && error "Invalid URL:  $URL" && exit 65
+    URL="file://$STORAGE/$BASE.pat"
   fi
 fi
 
@@ -46,11 +59,15 @@ if [ -z "$DL" ]; then
   [[ "${COUNTRY^^}" == "CN" ]] && DL="$DL_CHINA" || DL="$DL_GLOBAL"
 fi
 
-[ -z "$URL" ] && URL="$DL/release/7.2.2/72806/DSM_VirtualDSM_72806.pat"
+if [ -z "$URL" ]; then
+  URL="$DL/release/7.2.2/72806/DSM_VirtualDSM_72806.pat"
+fi
 
-BASE=$(basename "${URL%%\?*}" .pat)
-: "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
-BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
+if [ ! -s "$FILE" ]; then
+  BASE=$(basename "${URL%%\?*}" .pat)
+  : "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
+  BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
+fi
 
 if [[ "$URL" != "file://$STORAGE/$BASE.pat" ]]; then
   rm -f "$STORAGE/$BASE.pat"
@@ -85,9 +102,9 @@ else
   TMP="/tmp/dsm"
   TMP_SPACE=2147483648
   SPACE=$(df --output=avail -B 1 /tmp | tail -n 1)
-  SPACE_MB=$(( (SPACE + 1048575)/1048576 ))
+  SPACE_MB=$(formatBytes "$SPACE")
   if (( TMP_SPACE > SPACE )); then
-    error "Not enough free space inside the container, have $SPACE_MB MB available but need at least 2 GB." && exit 93
+    error "Not enough free space inside the container, have $SPACE_MB available but need at least 2 GB." && exit 93
   fi
 fi
 
@@ -96,13 +113,13 @@ rm -rf "$TMP" && mkdir -p "$TMP"
 # Check free diskspace
 ROOT_SPACE=536870912
 SPACE=$(df --output=avail -B 1 / | tail -n 1)
-SPACE_MB=$(( (SPACE + 1048575)/1048576 ))
-(( ROOT_SPACE > SPACE )) && error "Not enough free space inside the container, have $SPACE_MB MB available but need at least 500 MB." && exit 96
+SPACE_MB=$(formatBytes "$SPACE" "down")
+(( ROOT_SPACE > SPACE )) && error "Not enough free space inside the container, have $SPACE_MB available but need at least 500 MB." && exit 96
 
 MIN_SPACE=15032385536
 SPACE=$(df --output=avail -B 1 "$STORAGE" | tail -n 1)
-SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-(( MIN_SPACE > SPACE )) && error "Not enough free space for installation in $STORAGE, have $SPACE_GB GB available but need at least 14 GB." && exit 94
+SPACE_GB=$(formatBytes "$SPACE")
+(( MIN_SPACE > SPACE )) && error "Not enough free space for installation in $STORAGE, have $SPACE_GB available but need at least 14 GB." && exit 94
 
 # Check if output is to interactive TTY
 if [ -t 1 ]; then
@@ -111,128 +128,16 @@ else
   PROGRESS="--progress=dot:giga"
 fi
 
-# Download the required files from the Synology website
-
-ROOT="Y"
-RD="$TMP/rd.gz"
-RDC="$STORAGE/dsm.rd"
-
-if [ ! -s "$RDC" ] && [[ "$URL" == "file://"* ]] && [[ "${URL,,}" == *"_42218.pat" ]]; then
-
-  rm -f "$RD"
-  rm -f "$RDC"
-
-  tar --extract --file="${URL:7}" --directory="$(dirname "$RD")"/. "$(basename "$RD")"
-  cp "$RD" "$RDC"
-
+if [[ "$URL" == "file://"* ]]; then
+  MSG="Copying DSM"
+  ERR="Failed to copy ${URL:7}"
+  info "Install: Copying installation image..."
+else
+  MSG="Downloading DSM"
+  ERR="Failed to download $URL"
+  info "Install: Downloading $BASE.pat..."
 fi
 
-if [ ! -s "$RDC" ]; then
-
-  rm -f "$RD"
-  rm -f "$RDC"
-
-  MSG="Downloading installer"
-  info "Install: $MSG..." && html "$MSG..."
-
-  SIZE=5394188
-  POS="65627648-71021835"
-  VERIFY="b4215a4b213ff5154db0488f92c87864"
-  LOC="$DL/release/7.0.1/42218/DSM_VirtualDSM_42218.pat"
-  [[ "${URL,,}" == *"_42218.pat" ]] && LOC="$URL"
-
-  /run/progress.sh "$RD" "$SIZE" "$MSG ([P])..." &
-  { curl -r "$POS" -sfk --connect-timeout 10 -S -o "$RD" "$LOC"; rc=$?; } || :
-
-  fKill "progress.sh"
-
-  ERR="Failed to download $LOC"
-  (( rc == 3 )) && error "$ERR , cannot write file (disk full?)" && exit 60
-  (( rc == 4 )) && error "$ERR , network failure!" && exit 60
-  (( rc == 8 )) && error "$ERR , server issued an error response!" && exit 60
-
-  if (( rc != 0 )); then
-    if (( rc != 22 )) && (( rc != 56 )); then
-      error "$ERR , reason: $rc" && exit 60
-    fi
-    SUM="skip"
-  else
-    SUM=$(md5sum "$RD" | cut -f 1 -d " ")
-  fi
-
-  if [ "$SUM" != "$VERIFY" ]; then
-
-    PAT="/install.pat"
-    SIZE=379637760
-
-    rm -f "$RD"
-    rm -f "$PAT"
-
-    html "$MSG..."
-    /run/progress.sh "$PAT" "$SIZE" "$MSG ([P])..." &
-    { wget "$LOC" -O "$PAT" -q --no-check-certificate --timeout=10 --no-http-keep-alive --show-progress "$PROGRESS"; rc=$?; } || :
-
-    fKill "progress.sh"
-
-    ERR="Failed to download $LOC"
-    (( rc == 3 )) && error "$ERR , cannot write file (disk full?)" && exit 60
-    (( rc == 4 )) && error "$ERR , network failure!" && exit 60
-    (( rc == 8 )) && error "$ERR , server issued an error response!" && exit 60
-    (( rc != 0 )) && error "$ERR , reason: $rc" && exit 60
-
-    tar --extract --file="$PAT" --directory="$(dirname "$RD")"/. "$(basename "$RD")"
-    rm "$PAT"
-
-  fi
-
-  cp "$RD" "$RDC"
-
-fi
-
-if [ -f "$RDC" ]; then
-
-  { xz -dc <"$RDC" >"$TMP/rd" 2>/dev/null; rc=$?; } || :
-  (( rc != 1 )) && error "Failed to unxz $RDC on $FS, reason $rc" && exit 91
-
-  { (cd "$TMP" && cpio -idm <"$TMP/rd" 2>/dev/null); rc=$?; } || :
-
-  if (( rc != 0 )); then
-    ROOT="N"
-    { (cd "$TMP" && fakeroot cpio -idmu <"$TMP/rd" 2>/dev/null); rc=$?; } || :
-    (( rc != 0 )) && error "Failed to extract $RDC on $FS, reason $rc" && exit 92
-  fi
-
-  rm -rf /run/extract && mkdir -p /run/extract
-  for file in $TMP/usr/lib/libcurl.so.4 \
-              $TMP/usr/lib/libmbedcrypto.so.5 \
-              $TMP/usr/lib/libmbedtls.so.13 \
-              $TMP/usr/lib/libmbedx509.so.1 \
-              $TMP/usr/lib/libmsgpackc.so.2 \
-              $TMP/usr/lib/libsodium.so \
-              $TMP/usr/lib/libsynocodesign-ng-virtual-junior-wins.so.7 \
-              $TMP/usr/syno/bin/scemd; do
-    cp "$file" /run/extract/
-  done
-
-  if [ "$ARCH" != "amd64" ]; then
-    mkdir -p /lib64/
-    cp "$TMP/usr/lib/libc.so.6" /lib64/
-    cp "$TMP/usr/lib/libpthread.so.0" /lib64/
-    cp "$TMP/usr/lib/ld-linux-x86-64.so.2" /lib64/
-  fi
-
-  mv /run/extract/scemd /run/extract/syno_extract_system_patch
-  chmod +x /run/extract/syno_extract_system_patch
-
-fi
-
-rm -rf "$TMP" && mkdir -p "$TMP"
-
-info "Install: Downloading $BASE.pat..."
-
-MSG="Downloading DSM"
-ERR="Failed to download $URL"
-
 html "$MSG..."
 
 PAT="/$BASE.pat"
@@ -240,6 +145,10 @@ rm -f "$PAT"
 
 if [[ "$URL" == "file://"* ]]; then
 
+  if [ ! -f "${URL:7}" ]; then
+    error "File '${URL:7}' does not exist!" && exit 65
+  fi
+
   cp "${URL:7}" "$PAT"
 
 else
@@ -270,7 +179,7 @@ if ((SIZE<250000000)); then
   error "The specified PAT file is probably an update pack as it's too small." && exit 62
 fi
 
-MSG="Extracting downloaded image..."
+MSG="Extracting installation image..."
 info "Install: $MSG" && html "$MSG"
 
 if { tar tf "$PAT"; } >/dev/null 2>&1; then
@@ -279,22 +188,15 @@ if { tar tf "$PAT"; } >/dev/null 2>&1; then
 
 else
 
-  export LD_LIBRARY_PATH="/run/extract"
+  { (cd "$TMP" && python3 /run/extract.py -i "$PAT" -d 2>/run/extract.log); rc=$?; } || :
 
-  if [ "$ARCH" == "amd64" ]; then
-    { /run/extract/syno_extract_system_patch "$PAT" "$TMP/."; rc=$?; } || :
-  else
-    { qemu-x86_64 /run/extract/syno_extract_system_patch "$PAT" "$TMP/."; rc=$?; } || :
+  if (( rc != 0 )); then
+    cat /run/extract.log
+    error "Failed to extract PAT file, reason $rc" && exit 63
   fi
 
-  export LD_LIBRARY_PATH=""
-
-  (( rc != 0 )) && error "Failed to extract PAT file, reason $rc" && exit 63
-
 fi
 
-rm -rf /run/extract
-
 MSG="Preparing system partition..."
 info "Install: $MSG" && html "$MSG"
 
@@ -310,10 +212,10 @@ rm -f "$SYSTEM"
 # Check free diskspace
 SYSTEM_SIZE=10738466816
 SPACE=$(df --output=avail -B 1 "$STORAGE" | tail -n 1)
-SPACE_MB=$(( (SPACE + 1048575)/1048576 ))
+SPACE_MB=$(formatBytes "$SPACE")
 
 if (( SYSTEM_SIZE > SPACE )); then
-  error "Not enough free space in $STORAGE to create a 10 GB system disk, have only $SPACE_MB MB available." && exit 97
+  error "Not enough free space in $STORAGE to create a 10 GB system disk, have only $SPACE_MB available." && exit 97
 fi
 
 if ! touch "$SYSTEM"; then
@@ -328,10 +230,12 @@ if [[ "${FS,,}" == "btrfs" ]]; then
   fi
 fi
 
-if ! fallocate -l "$SYSTEM_SIZE" "$SYSTEM"; then
-  if ! truncate -s "$SYSTEM_SIZE" "$SYSTEM"; then
-    rm -f "$SYSTEM"
-    error "Could not allocate file $SYSTEM for the system disk." && exit 98
+if ! fallocate -l "$SYSTEM_SIZE" "$SYSTEM" &>/dev/null; then
+  if ! fallocate -l -x "$SYSTEM_SIZE" "$SYSTEM"; then
+    if ! truncate -s "$SYSTEM_SIZE" "$SYSTEM"; then
+      rm -f "$SYSTEM"
+      error "Could not allocate file $SYSTEM for the system disk." && exit 98
+    fi
   fi
 fi
 
@@ -366,12 +270,9 @@ mv "$HDA.tgz" "$HDA.txz"
 [ -d "$PKG" ] && mv "$PKG/" "$MOUNT/.SynoUpgradePackages/"
 rm -f "$MOUNT/.SynoUpgradePackages/ActiveInsight-"*
 
-[ -s "$HDP.txz" ] && tar xpfJ "$HDP.txz" --absolute-names -C "$MOUNT/"
-
 if [ -s "$IDB.txz" ]; then
-  INDEX_DB="$MOUNT/usr/syno/synoman/indexdb/"
+  INDEX_DB="$MOUNT/usr/syno/synoman/indexdb"
   mkdir -p "$INDEX_DB"
-  tar xpfJ "$IDB.txz" --absolute-names -C "$INDEX_DB"
 fi
 
 LABEL="1.44.1-42218"
@@ -379,22 +280,12 @@ OFFSET="1048576"    # 2048 * 512
 NUMBLOCKS="2097152" # (16777216 * 512) / 4096
 MSG="Installing system partition..."
 
-if [[ "$ROOT" != [Nn]* ]]; then
-
-  tar xpfJ "$HDA.txz" --absolute-names --skip-old-files -C "$MOUNT/"
-
-  info "Install: $MSG" && html "$MSG"
-
-  mke2fs -q -t ext4 -b 4096 -d "$MOUNT/" -L "$LABEL" -F -E "offset=$OFFSET" "$SYSTEM" "$NUMBLOCKS"
-
-else
-
-  fakeroot -- bash -c "set -Eeu;\
-        tar xpfJ $HDA.txz --absolute-names --skip-old-files -C $MOUNT/;\
-        printf '%b%s%b' '\E[1;34m❯ \E[1;36m' 'Install: $MSG' '\E[0m\n';\
-        mke2fs -q -t ext4 -b 4096 -d $MOUNT/ -L $LABEL -F -E offset=$OFFSET $SYSTEM $NUMBLOCKS"
-
-fi
+fakeroot -- bash -c "set -Eeu;\
+  [ -s $HDP.txz ] && tar xpfJ $HDP.txz --absolute-names -C $MOUNT/;\
+  [ -s $IDB.txz ] && tar xpfJ $IDB.txz --absolute-names -C $INDEX_DB/;\
+  tar xpfJ $HDA.txz --absolute-names --skip-old-files -C $MOUNT/;\
+  printf '%b%s%b' '\E[1;34m❯ \E[1;36m' 'Install: $MSG' '\E[0m\n';\
+  mke2fs -q -t ext4 -b 4096 -d $MOUNT/ -L $LABEL -F -E offset=$OFFSET $SYSTEM $NUMBLOCKS"
 
 rm -rf "$MOUNT"
 echo "$BASE" > "$STORAGE/dsm.ver"

src/network.sh

@@ -49,7 +49,7 @@ configureDHCP() {
       error "Cannot create macvtap interface. Please make sure that the network type of the container is 'macvlan' and not 'ipvlan'."
       return 1 ;;
     "RTNETLINK answers: Operation not permitted"* )
-      error "No permission to create macvtap interface. Please make sure that your host kernel supports it and that the NET_ADMIN capability is set." 
+      error "No permission to create macvtap interface. Please make sure that your host kernel supports it and that the NET_ADMIN capability is set."
       return 1 ;;
     *)
       [ -n "$msg" ] && echo "$msg" >&2
@@ -104,21 +104,33 @@ configureDHCP() {
 
 configureDNS() {
 
-  # dnsmasq configuration:
-  DNSMASQ_OPTS+=" --dhcp-range=$VM_NET_IP,$VM_NET_IP --dhcp-host=$VM_NET_MAC,,$VM_NET_IP,$VM_NET_HOST,infinite --dhcp-option=option:netmask,255.255.255.0"
-
   # Create lease file for faster resolve
   echo "0 $VM_NET_MAC $VM_NET_IP $VM_NET_HOST 01:$VM_NET_MAC" > /var/lib/misc/dnsmasq.leases
   chmod 644 /var/lib/misc/dnsmasq.leases
 
+  # dnsmasq configuration:
+  DNSMASQ_OPTS+=" --dhcp-authoritative"
+
+  # Set DHCP range and host
+  DNSMASQ_OPTS+=" --dhcp-range=$VM_NET_IP,$VM_NET_IP"
+  DNSMASQ_OPTS+=" --dhcp-host=$VM_NET_MAC,,$VM_NET_IP,$VM_NET_HOST,infinite"
+
   # Set DNS server and gateway
-  DNSMASQ_OPTS+=" --dhcp-option=option:dns-server,${VM_NET_IP%.*}.1 --dhcp-option=option:router,${VM_NET_IP%.*}.1"
+  DNSMASQ_OPTS+=" --dhcp-option=option:netmask,255.255.255.0"
+  DNSMASQ_OPTS+=" --dhcp-option=option:router,${VM_NET_IP%.*}.1"
+  DNSMASQ_OPTS+=" --dhcp-option=option:dns-server,${VM_NET_IP%.*}.1"
 
   # Add DNS entry for container
   DNSMASQ_OPTS+=" --address=/host.lan/${VM_NET_IP%.*}.1"
 
   DNSMASQ_OPTS=$(echo "$DNSMASQ_OPTS" | sed 's/\t/ /g' | tr -s ' ' | sed 's/^ *//')
 
+  if [[ "${DEBUG_DNS:-}" == [Yy1]* ]]; then
+   DNSMASQ_OPTS+=" -d"
+   $DNSMASQ ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS} &
+   return 0
+  fi
+
   if ! $DNSMASQ ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS}; then
     error "Failed to start dnsmasq, reason: $?" && return 1
   fi
@@ -164,7 +176,11 @@ getHostPorts() {
 
 configureUser() {
 
-  NET_OPTS="-netdev user,id=hostnet0,host=${VM_NET_IP%.*}.1,net=${VM_NET_IP%.*}.0/24,dhcpstart=$VM_NET_IP,hostname=$VM_NET_HOST"
+  if [ -z "$IP6" ]; then
+    NET_OPTS="-netdev user,id=hostnet0,host=${VM_NET_IP%.*}.1,net=${VM_NET_IP%.*}.0/24,dhcpstart=$VM_NET_IP,hostname=$VM_NET_HOST"
+  else
+    NET_OPTS="-netdev user,id=hostnet0,ipv4=on,host=${VM_NET_IP%.*}.1,net=${VM_NET_IP%.*}.0/24,dhcpstart=$VM_NET_IP,ipv6=on,hostname=$VM_NET_HOST"
+  fi
 
   local forward
   forward=$(getUserPorts "$USER_PORTS")
@@ -180,6 +196,7 @@ configureNAT() {
 
   # Create the necessary file structure for /dev/net/tun
   if [ ! -c /dev/net/tun ]; then
+    [[ "$PODMAN" == [Yy1]* ]] && return 1
     [ ! -d /dev/net ] && mkdir -m 755 /dev/net
     if mknod /dev/net/tun c 10 200; then
       chmod 666 /dev/net/tun
@@ -192,9 +209,11 @@ configureNAT() {
 
   # Check port forwarding flag
   if [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
-    { sysctl -w net.ipv4.ip_forward=1 > /dev/null; rc=$?; } || :
+    { sysctl -w net.ipv4.ip_forward=1 > /dev/null 2>&1; rc=$?; } || :
     if (( rc != 0 )) || [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
-      error "IP forwarding is disabled. $ADD_ERR --sysctl net.ipv4.ip_forward=1" && return 1
+      [[ "$PODMAN" == [Yy1]* ]] && return 1
+      error "IP forwarding is disabled. $ADD_ERR --sysctl net.ipv4.ip_forward=1"
+      return 1
     fi
   fi
 
@@ -206,7 +225,7 @@ configureNAT() {
   fi
 
   if ! ip address add "${VM_NET_IP%.*}.1/24" broadcast "${VM_NET_IP%.*}.255" dev dockerbridge; then
-    error "Failed to add IP address!" && return 1
+    error "Failed to add IP address pool!" && return 1
   fi
 
   while ! ip link set dockerbridge up; do
@@ -255,7 +274,7 @@ configureNAT() {
     error "Failed to configure IP tables!" && return 1
   fi
 
-  if ! iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p udp  -j DNAT --to "$VM_NET_IP"; then
+  if ! iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p udp -j DNAT --to "$VM_NET_IP"; then
     error "Failed to configure IP tables!" && return 1
   fi
 
@@ -324,17 +343,17 @@ closeNetwork() {
 
 checkOS() {
 
-  local name
+  local kernel
   local os=""
   local if="macvlan"
-  name=$(uname -a)
+  kernel=$(uname -a)
 
-  [[ "${name,,}" == *"darwin"* ]] && os="Docker Desktop for macOS"
-  [[ "${name,,}" == *"microsoft"* ]] && os="Docker Desktop for Windows"
+  [[ "${kernel,,}" == *"darwin"* ]] && os="Docker Desktop for macOS"
+  [[ "${kernel,,}" == *"microsoft"* ]] && os="Docker Desktop for Windows"
 
   if [[ "$DHCP" == [Yy1]* ]]; then
     if="macvtap"
-    [[ "${name,,}" == *"synology"* ]] && os="Synology Container Manager"
+    [[ "${kernel,,}" == *"synology"* ]] && os="Synology Container Manager"
   fi
 
   if [ -n "$os" ]; then
@@ -359,9 +378,15 @@ getInfo() {
 
   if [ ! -d "/sys/class/net/$VM_NET_DEV" ]; then
     error "Network interface '$VM_NET_DEV' does not exist inside the container!"
-    error "$ADD_ERR -e \"VM_NET_DEV=NAME\" to specify another interface name." && exit 27
+    error "$ADD_ERR -e \"VM_NET_DEV=NAME\" to specify another interface name." && exit 26
   fi
 
+  BASE_IP="${VM_NET_IP%.*}."
+
+  if [ "${VM_NET_IP/$BASE_IP/}" -lt "3" ]; then
+    error "Invalid VM_NET_IP, must end in a higher number than .3" && exit 27
+  fi
+  
   if [ -z "$MTU" ]; then
     MTU=$(cat "/sys/class/net/$VM_NET_DEV/mtu")
   fi
@@ -379,6 +404,7 @@ getInfo() {
   if [ -z "$VM_NET_MAC" ]; then
     local file="$STORAGE/dsm.mac"
     [ -s "$file" ] && VM_NET_MAC=$(<"$file")
+    VM_NET_MAC="${VM_NET_MAC//[![:print:]]/}"
     if [ -z "$VM_NET_MAC" ]; then
       # Generate MAC address based on Docker container ID in hostname
       VM_NET_MAC=$(echo "$HOST" | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:11:32:\3:\4:\5/')
@@ -398,8 +424,17 @@ getInfo() {
     error "Invalid MAC address: '$VM_NET_MAC', should be 12 or 17 digits long!" && exit 28
   fi
 
-  GATEWAY=$(ip route list dev "$VM_NET_DEV" | awk ' /^default/ {print $3}')
-  IP=$(ip address show dev "$VM_NET_DEV" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/)
+  GATEWAY=$(ip route list dev "$VM_NET_DEV" | awk ' /^default/ {print $3}' | head -n 1)
+  IP=$(ip address show dev "$VM_NET_DEV" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/ | head -n 1)
+
+  IP6=""
+  # shellcheck disable=SC2143
+  if [ -f /proc/net/if_inet6 ] && [ -n "$(ifconfig -a | grep inet6)" ]; then
+    IP6=$(ip -6 addr show dev "$VM_NET_DEV" scope global up)
+    [ -n "$IP6" ] && IP6=$(echo "$IP6" | sed -e's/^.*inet6 \([^ ]*\)\/.*$/\1/;t;d' | head -n 1)
+  fi
+
+  [ -f "/run/.containerenv" ] && PODMAN="Y" || PODMAN="N"
   echo "$IP" > /run/shm/qemu.ip
 
   return 0
@@ -422,7 +457,10 @@ if [[ "$DEBUG" == [Yy1]* ]]; then
   line="Host: $HOST  IP: $IP  Gateway: $GATEWAY  Interface: $VM_NET_DEV  MAC: $VM_NET_MAC  MTU: $mtu"
   [[ "$MTU" != "0" ]] && [[ "$MTU" != "$mtu" ]] && line+=" ($MTU)"
   info "$line"
-  [ -f /etc/resolv.conf ] && grep '^nameserver*' /etc/resolv.conf
+  if [ -f /etc/resolv.conf ]; then
+    nameservers=$(grep '^nameserver*' /etc/resolv.conf | head -c -1 | sed 's/nameserver //g;' | sed -z 's/\n/, /g')
+    [ -n "$nameservers" ] && info "Nameservers: $nameservers"
+  fi
   echo
 fi
 
@@ -431,8 +469,8 @@ if [[ "$IP" == "172.17."* ]]; then
 fi
 
 if [[ -d "/sys/class/net/$VM_NET_TAP" ]]; then
-    info "Lingering interface will be removed..."
-    ip link delete "$VM_NET_TAP" || true
+  info "Lingering interface will be removed..."
+  ip link delete "$VM_NET_TAP" || true
 fi
 
 if [[ "$DHCP" == [Yy1]* ]]; then
@@ -466,7 +504,14 @@ else
 
       closeBridge
       NETWORK="user"
-      warn "falling back to usermode networking! Performance will be bad and port mapping will not work."
+      msg="falling back to user-mode networking!"
+      if [[ "$PODMAN" != [Yy1]* ]]; then
+        msg="an error occured, $msg"
+      else
+        msg="podman detected, $msg"
+      fi
+      warn "$msg"
+      [ -z "$USER_PORTS" ] && info "Notice: port mapping will not work without \"USER_PORTS\" now."
 
     fi
 
@@ -474,7 +519,7 @@ else
 
   if [[ "${NETWORK,,}" == "user"* ]]; then
 
-    # Configure for usermode networking (slirp)
+    # Configure for user-mode networking (slirp)
     configureUser || exit 24
 
   fi

src/proc.sh

@@ -9,6 +9,24 @@ set -Eeuo pipefail
 : "${CPU_MODEL:=""}"
 : "${DEF_MODEL:="qemu64"}"
 
+CLOCKSOURCE="tsc"
+[[ "${ARCH,,}" == "arm64" ]] && CLOCKSOURCE="arch_sys_counter"
+CLOCK="/sys/devices/system/clocksource/clocksource0/current_clocksource"
+
+if [ ! -f "$CLOCK" ]; then
+  warn "file \"$CLOCK\" cannot not found?"
+else
+  result=$(<"$CLOCK")
+  result="${result//[![:print:]]/}"
+  case "${result,,}" in
+    "${CLOCKSOURCE,,}" ) ;;
+    "kvm-clock" ) info "Nested KVM virtualization detected.." ;;
+    "hyperv_clocksource_tsc_page" ) info "Nested Hyper-V virtualization detected.." ;;
+    "hpet" ) warn "unsupported clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'." ;;
+    *) warn "unexpected clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'." ;;
+  esac
+fi
+
 if [[ "${ARCH,,}" != "amd64" ]]; then
   KVM="N"
   warn "your CPU architecture is ${ARCH^^} and cannot provide KVM acceleration for x64 instructions, this will cause a major loss of performance."
@@ -19,14 +37,14 @@ if [[ "$KVM" != [Nn]* ]]; then
   KVM_ERR=""
 
   if [ ! -e /dev/kvm ]; then
-    KVM_ERR="(device file missing)"
+    KVM_ERR="(/dev/kvm is missing)"
   else
     if ! sh -c 'echo -n > /dev/kvm' &> /dev/null; then
-      KVM_ERR="(no write access)"
+      KVM_ERR="(/dev/kvm is unwriteable)"
     else
       flags=$(sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo)
       if ! grep -qw "vmx\|svm" <<< "$flags"; then
-        KVM_ERR="(vmx/svm disabled)"
+        KVM_ERR="(not enabled in BIOS)"
       fi
     fi
   fi
@@ -35,9 +53,17 @@ if [[ "$KVM" != [Nn]* ]]; then
     KVM="N"
     if [[ "$OSTYPE" =~ ^darwin ]]; then
       warn "you are using macOS which has no KVM support, this will cause a major loss of performance."
-    else
-      error "KVM acceleration not available $KVM_ERR, this will cause a major loss of performance."
-      error "See the FAQ on how to diagnose the cause, or continue without KVM by setting KVM=N (not recommended)."
+    else      
+      kernel=$(uname -a)
+      case "${kernel,,}" in
+        *"microsoft"* )
+          error "Please bind '/dev/kvm' as a volume in the optional container settings when using Docker Desktop." ;;
+        *"synology"* )
+          error "Please make sure that Synology VMM (Virtual Machine Manager) is installed and that '/dev/kvm' is binded to this container." ;;
+        *)
+          error "KVM acceleration is not available $KVM_ERR, this will cause a major loss of performance."
+          error "See the FAQ for possible causes, or continue without it by adding KVM: \"N\" (not recommended)." ;;
+      esac
       [[ "$DEBUG" != [Yy1]* ]] && exit 88
     fi
   fi
@@ -47,7 +73,6 @@ fi
 if [[ "$KVM" != [Nn]* ]]; then
 
   CPU_FEATURES="kvm=on,l3-cache=on,+hypervisor"
-  CLOCK="/sys/devices/system/clocksource/clocksource0/current_clocksource"
   KVM_OPTS=",accel=kvm -enable-kvm -global kvm-pit.lost_tick_policy=discard"
 
   if ! grep -qw "sse4_2" <<< "$flags"; then
@@ -61,15 +86,6 @@ if [[ "$KVM" != [Nn]* ]]; then
     CPU_FEATURES+=",migratable=no"
   fi
 
-  if [ -f "$CLOCK" ]; then
-    CLOCK=$(<"$CLOCK")
-    if [[ "${CLOCK,,}" != "tsc" ]]; then
-      warn "unexpected clocksource: $CLOCK"
-    fi
-  else
-    warn "file \"$CLOCK\" cannot not found?"
-  fi
-
   if grep -qw "svm" <<< "$flags"; then
 
     # AMD processor
@@ -127,7 +143,7 @@ else
 fi
 
 if [ -z "$HOST_CPU" ]; then
-  HOST_CPU=$(lscpu | grep -m 1 'Model name' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
+  [[ "${CPU,,}" != "unknown" ]] && HOST_CPU="$CPU"
 fi
 
 if [ -n "$HOST_CPU" ]; then

src/progress.sh

@@ -26,7 +26,7 @@ do
     bytes=$(du -sb "$file" | cut -f1)
     if (( bytes > 1000 )); then
       if [ -z "$total" ] || [[ "$total" == "0" ]]; then
-        size=$(numfmt --to=iec --suffix=B  "$bytes" | sed -r 's/([A-Z])/ \1/')
+        size=$(numfmt --to=iec --suffix=B "$bytes" | sed -r 's/([A-Z])/ \1/')
       else
         size="$(echo "$bytes" "$total" | awk '{printf "%.1f", $1 * 100 / $2}')"
         size="$size%"

src/reset.sh

@@ -1,10 +1,6 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
-info () { printf "%b%s%b" "\E[1;34m❯ \E[1;36m" "${1:-}" "\E[0m\n"; }
-error () { printf "%b%s%b" "\E[1;31m❯ " "ERROR: ${1:-}" "\E[0m\n" >&2; }
-warn () { printf "%b%s%b" "\E[1;31m❯ " "Warning: ${1:-}" "\E[0m\n" >&2; }
-
 trap 'error "Status $? while: $BASH_COMMAND (line $LINENO/$BASH_LINENO)"' ERR
 
 [ ! -f "/run/entry.sh" ] && error "Script must run inside Docker container!" && exit 11
@@ -17,13 +13,12 @@ echo "❯ For support visit $SUPPORT"
 
 : "${TZ:=""}"              # System local timezone
 : "${DEBUG:="N"}"          # Disable debugging mode
-: "${COMMIT:="N"}"         # Commit to local image
 : "${COUNTRY:=""}"         # Country code for mirror
 : "${CONSOLE:="N"}"        # Disable console mode
 : "${ALLOCATE:=""}"        # Preallocate diskspace
 : "${ARGUMENTS:=""}"       # Extra QEMU parameters
-: "${CPU_CORES:="1"}"      # Amount of CPU cores
-: "${RAM_SIZE:="1G"}"      # Maximum RAM amount
+: "${CPU_CORES:="2"}"      # Amount of CPU cores
+: "${RAM_SIZE:="2G"}"      # Maximum RAM amount
 : "${RAM_CHECK:="Y"}"      # Check available RAM
 : "${DISK_SIZE:="16G"}"    # Initial data disk size
 : "${STORAGE:="/storage"}" # Storage folder location
@@ -39,7 +34,7 @@ TEMPLATE="/var/www/index.html"
 FOOTER1="$APP for Docker v$(</run/version)"
 FOOTER2="<a href='$SUPPORT'>$SUPPORT</a>"
 
-CPI=$(lscpu)
+CPU=$(cpu)
 SYS=$(uname -r)
 HOST=$(hostname -s)
 KERNEL=$(echo "$SYS" | cut -b 1)
@@ -47,34 +42,13 @@ MINOR=$(echo "$SYS" | cut -d '.' -f2)
 ARCH=$(dpkg --print-architecture)
 CORES=$(grep -c '^processor' /proc/cpuinfo)
 
-if ! grep -qi "socket(s)" <<< "$CPI"; then
+if ! grep -qi "socket(s)" <<< "$(lscpu)"; then
   SOCKETS=1
 else
-  SOCKETS=$(echo "$CPI" | grep -m 1 -i 'socket(s)' | awk '{print $(2)}')
+  SOCKETS=$(lscpu | grep -m 1 -i 'socket(s)' | awk '{print $(2)}')
 fi
 
-if ! grep -qi "model name" <<< "$CPI"; then
-  CPU=""
-else
-  CPU=$(echo "$CPI" | grep -m 1 -i 'model name' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
-fi
-
-if [ -z "${CPU// /}" ] && grep -qi "model:" <<< "$CPI"; then
-  CPU=$(echo "$CPI" | grep -m 1 -i 'model:' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
-fi
-
-CPU="${CPU// CPU/}"
-CPU="${CPU// 8 Core/}"
-CPU="${CPU// 16 Core/}"
-CPU="${CPU// 32 Core/}"
-CPU="${CPU// 64 Core/}"
-CPU="${CPU// Processor/}"
-CPU="${CPU// Quad core/}"
-CPU="${CPU// Core TM/ Core}"
-CPU="${CPU// with Radeon Graphics/}"
-CPU="${CPU// with Radeon Vega Graphics/}"
-
-[ -z "${CPU// /}" ] && CPU="Unknown"
+[ -n "${CPU_CORES//[0-9 ]}" ] && error "Invalid amount of CPU_CORES: $CPU_CORES" && exit 15
 
 # Check system
 
@@ -86,13 +60,13 @@ fi
 
 # Check folder
 
-if [[ "$COMMIT" != [Nn]* ]]; then
+if [[ "${COMMIT:-}" == [Yy1]* ]]; then
   STORAGE="/local"
   mkdir -p "$STORAGE"
-else
-  if [ ! -d "$STORAGE" ]; then
-    error "Storage folder ($STORAGE) not found!" && exit 13
-  fi
+fi
+
+if [ ! -d "$STORAGE" ]; then
+  error "Storage folder ($STORAGE) not found!" && exit 13
 fi
 
 # Check filesystem
@@ -107,15 +81,18 @@ fi
 RAM_SPARE=500000000
 RAM_AVAIL=$(free -b | grep -m 1 Mem: | awk '{print $7}')
 RAM_TOTAL=$(free -b | grep -m 1 Mem: | awk '{print $2}')
-RAM_SIZE=$(echo "${RAM_SIZE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
-[[ -z ${RAM_SIZE//[0-9]} ]] && [ "$RAM_SIZE" -lt "130" ] && RAM_SIZE="${RAM_SIZE}G"
-! numfmt --from=iec "$RAM_SIZE" &>/dev/null && error "Invalid RAM size: $RAM_SIZE" && exit 15
-RAM_WANTED=$(numfmt --from=iec "$RAM_SIZE")
-[ "$RAM_WANTED" -lt "136314880 " ] && error "Invalid RAM size: $RAM_SIZE" && exit 16
 
-AVAIL_GB=$(( RAM_AVAIL/1073741824 ))
-TOTAL_GB=$(( (RAM_TOTAL + 1073741823)/1073741824 ))
-WANTED_GB=$(( (RAM_WANTED + 1073741823)/1073741824 ))
+RAM_SIZE="${RAM_SIZE// /}"
+[ -z "$RAM_SIZE" ] && error "RAM_SIZE not specified!" && exit 16
+
+if [ -z "${RAM_SIZE//[0-9. ]}" ]; then
+  [ "${RAM_SIZE%%.*}" -lt "130" ] && RAM_SIZE="${RAM_SIZE}G" || RAM_SIZE="${RAM_SIZE}M"
+fi
+
+RAM_SIZE=$(echo "${RAM_SIZE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
+! numfmt --from=iec "$RAM_SIZE" &>/dev/null && error "Invalid RAM_SIZE: $RAM_SIZE" && exit 16
+RAM_WANTED=$(numfmt --from=iec "$RAM_SIZE")
+[ "$RAM_WANTED" -lt "136314880 " ] && error "RAM_SIZE is too low: $RAM_SIZE" && exit 16
 
 # Print system info
 SYS="${SYS/-generic/}"
@@ -123,18 +100,20 @@ FS="${FS/UNKNOWN //}"
 FS="${FS/ext2\/ext3/ext4}"
 FS=$(echo "$FS" | sed 's/[)(]//g')
 SPACE=$(df --output=avail -B 1 "$STORAGE" | tail -n 1)
-SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
+SPACE_GB=$(formatBytes "$SPACE" "down")
+AVAIL_MEM=$(formatBytes "$RAM_AVAIL" "down")
+TOTAL_MEM=$(formatBytes "$RAM_TOTAL" "up")
 
-echo "❯ CPU: ${CPU} | RAM: $AVAIL_GB/$TOTAL_GB GB | DISK: $SPACE_GB GB (${FS}) | KERNEL: ${SYS}..."
+echo "❯ CPU: ${CPU} | RAM: ${AVAIL_MEM/ GB/}/$TOTAL_MEM | DISK: $SPACE_GB (${FS}) | KERNEL: ${SYS}..."
 echo
 
-# Check memory
+# Check available memory
 
-if [[ "$RAM_CHECK" != [Nn]* ]]; then
-  if (( (RAM_WANTED + RAM_SPARE) > RAM_AVAIL )); then
-    error "Your configured RAM_SIZE of $WANTED_GB GB is too high for the $AVAIL_GB GB of memory available, please set a lower value."
-    exit 17
-  fi
+if [[ "$RAM_CHECK" != [Nn]* ]] && (( (RAM_WANTED + RAM_SPARE) > RAM_AVAIL )); then
+  AVAIL_MEM=$(formatBytes "$RAM_AVAIL")
+  msg="Your configured RAM_SIZE of ${RAM_SIZE/G/ GB} is too high for the $AVAIL_MEM of memory available, please set a lower value."
+  [[ "${FS,,}" != "zfs" ]] && error "$msg" && exit 17
+  info "$msg"
 fi
 
 # Cleanup files
@@ -145,91 +124,6 @@ rm -f /run/shm/dsm.url
 rm -rf /tmp/dsm
 rm -rf "$STORAGE/tmp"
 
-# Helper functions
-
-isAlive() {
-  local pid=$1
-
-  if kill -0 "$pid" 2>/dev/null; then
-    return 0
-  fi
-
-  return 1
-}
-
-pKill() {
-  local pid=$1
-
-  { kill -15 "$pid" || true; } 2>/dev/null
-
-  while isAlive "$pid"; do
-    sleep 0.2
-  done
-
-  return 0
-}
-
-fWait() {
-  local name=$1
-
-  while pgrep -f -l "$name" >/dev/null; do
-    sleep 0.2
-  done
-
-  return 0
-}
-
-fKill() {
-  local name=$1
-
-  { pkill -f "$name" || true; } 2>/dev/null
-  fWait "$name"
-
-  return 0
-}
-
-escape () {
-    local s
-    s=${1//&/\&amp;}
-    s=${s//</\&lt;}
-    s=${s//>/\&gt;}
-    s=${s//'"'/\&quot;}
-    printf -- %s "$s"
-    return 0
-}
-
-html()
-{
-    local title
-    local body
-    local script
-    local footer
-
-    title=$(escape "$APP")
-    title="<title>$title</title>"
-    footer=$(escape "$FOOTER1")
-
-    body=$(escape "$1")
-    if [[ "$body" == *"..." ]]; then
-      body="<p class=\"loading\">${body/.../}</p>"
-    fi
-
-    [ -n "${2:-}" ] && script="$2" || script=""
-
-    local HTML
-    HTML=$(<"$TEMPLATE")
-    HTML="${HTML/\[1\]/$title}"
-    HTML="${HTML/\[2\]/$script}"
-    HTML="${HTML/\[3\]/$body}"
-    HTML="${HTML/\[4\]/$footer}"
-    HTML="${HTML/\[5\]/$FOOTER2}"
-
-    echo "$HTML" > "$PAGE"
-    echo "$body" > "$INFO"
-
-    return 0
-}
-
 getCountry() {
   local url=$1
   local query=$2
@@ -290,6 +184,17 @@ addPackage() {
   return 0
 }
 
+# shellcheck disable=SC2143
+if [ -f /proc/net/if_inet6 ] && [ -n "$(ifconfig -a | grep inet6)" ]; then
+
+  sed -i "s/listen 5000 default_server;/listen [::]:5000 default_server ipv6only=off;/g" /etc/nginx/sites-enabled/web.conf
+
+else
+
+  sed -i "s/listen [::]:5000 default_server ipv6only=off;/listen 5000 default_server;/g" /etc/nginx/sites-enabled/web.conf
+
+fi
+
 # Start webserver
 cp -r /var/www/* /run/shm
 html "Starting $APP for Docker..."

src/utils.sh

@@ -0,0 +1,175 @@
+#!/usr/bin/env bash
+set -Eeuo pipefail
+
+# Helper functions
+
+info () { printf "%b%s%b" "\E[1;34m❯ \E[1;36m" "${1:-}" "\E[0m\n"; }
+error () { printf "%b%s%b" "\E[1;31m❯ " "ERROR: ${1:-}" "\E[0m\n" >&2; }
+warn () { printf "%b%s%b" "\E[1;31m❯ " "Warning: ${1:-}" "\E[0m\n" >&2; }
+
+formatBytes() {
+  local result
+  result=$(numfmt --to=iec --suffix=B "$1" | sed -r 's/([A-Z])/ \1/' | sed 's/ B/ bytes/g;')
+  local unit="${result//[0-9. ]}"
+  result="${result//[a-zA-Z ]/}"
+  if [[ "${2:-}" == "up" ]]; then
+    if [[ "$result" == *"."* ]]; then
+      result="${result%%.*}"
+      result=$((result+1))
+    fi
+  else
+    if [[ "${2:-}" == "down" ]]; then
+      result="${result%%.*}"
+    fi
+  fi
+  echo "$result $unit"
+  return 0
+}
+
+isAlive() {
+  local pid="$1"
+
+  if kill -0 "$pid" 2>/dev/null; then
+    return 0
+  fi
+
+  return 1
+}
+
+pKill() {
+  local pid="$1"
+
+  { kill -15 "$pid" || true; } 2>/dev/null
+
+  while isAlive "$pid"; do
+    sleep 0.2
+  done
+
+  return 0
+}
+
+fWait() {
+  local name="$1"
+
+  while pgrep -f -l "$name" >/dev/null; do
+    sleep 0.2
+  done
+
+  return 0
+}
+
+fKill() {
+  local name="$1"
+
+  { pkill -f "$name" || true; } 2>/dev/null
+  fWait "$name"
+
+  return 0
+}
+
+escape () {
+  local s
+  s=${1//&/\&}
+  s=${s//</\&lt;}
+  s=${s//>/\&gt;}
+  s=${s//'"'/\&quot;}
+  printf -- %s "$s"
+  return 0
+}
+
+html() {
+  local title
+  local body
+  local script
+  local footer
+
+  title=$(escape "$APP")
+  title="<title>$title</title>"
+  footer=$(escape "$FOOTER1")
+
+  body=$(escape "$1")
+  if [[ "$body" == *"..." ]]; then
+    body="<p class=\"loading\">${body/.../}</p>"
+  fi
+
+  [ -n "${2:-}" ] && script="$2" || script=""
+
+  local HTML
+  HTML=$(<"$TEMPLATE")
+  HTML="${HTML/\[1\]/$title}"
+  HTML="${HTML/\[2\]/$script}"
+  HTML="${HTML/\[3\]/$body}"
+  HTML="${HTML/\[4\]/$footer}"
+  HTML="${HTML/\[5\]/$FOOTER2}"
+
+  echo "$HTML" > "$PAGE"
+  echo "$body" > "$INFO"
+
+  return 0
+}
+
+cpu() {
+  local ret
+  local cpu=""
+
+  ret=$(lscpu)
+
+  if grep -qi "model name" <<< "$ret"; then
+    cpu=$(echo "$ret" | grep -m 1 -i 'model name' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
+  fi
+
+  if [ -z "${cpu// /}" ] && grep -qi "model:" <<< "$ret"; then
+    cpu=$(echo "$ret" | grep -m 1 -i 'model:' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
+  fi
+
+  cpu="${cpu// CPU/}"
+  cpu="${cpu// 4 Core/}"
+  cpu="${cpu// 6 Core/}"
+  cpu="${cpu// 8 Core/}"
+  cpu="${cpu// 10 Core/}"
+  cpu="${cpu// 12 Core/}"
+  cpu="${cpu// 16 Core/}"
+  cpu="${cpu// 32 Core/}"
+  cpu="${cpu// 48 Core/}"
+  cpu="${cpu// 64 Core/}"
+  cpu="${cpu// 96 Core/}"
+  cpu="${cpu// 128 Core/}"
+  cpu="${cpu//7th Gen /}"
+  cpu="${cpu//8th Gen /}"
+  cpu="${cpu//9th Gen /}"
+  cpu="${cpu//10th Gen /}"
+  cpu="${cpu//11th Gen /}"
+  cpu="${cpu//12th Gen /}"
+  cpu="${cpu//13th Gen /}"
+  cpu="${cpu//14th Gen /}"
+  cpu="${cpu//15th Gen /}"
+  cpu="${cpu// Processor/}"
+  cpu="${cpu// Quad core/}"
+  cpu="${cpu// Dual core/}"
+  cpu="${cpu// Octa core/}"
+  cpu="${cpu// Core TM/ Core}"
+  cpu="${cpu// with Radeon Graphics/}"
+  cpu="${cpu// with Radeon Vega Graphics/}"
+  cpu="${cpu// with Radeon Vega Mobile Gfx/}"
+
+  [ -z "${cpu// /}" ] && cpu="Unknown"
+
+  echo "$cpu"
+  return 0
+}
+
+hasDisk() {
+
+  [ -b "/disk" ] && return 0
+  [ -b "/disk1" ] && return 0
+  [ -b "/dev/disk1" ] && return 0
+  [ -b "${DEVICE:-}" ] && return 0
+
+  [ -z "${DISK_NAME:-}" ] && DISK_NAME="data"
+  [ -s "$STORAGE/$DISK_NAME.img" ]  && return 0
+  [ -s "$STORAGE/$DISK_NAME.qcow2" ] && return 0
+
+  return 1
+}
+
+return 0

web/conf/nginx.conf

@@ -1,5 +1,4 @@
 server {
-    listen 80;
     listen 5000 default_server;
 
     autoindex on;