feat: Automatically adjust RAM size when too high (#1071)

.devcontainer.json

@@ -1,6 +0,0 @@
-{
-  "name": "dsm",
-  "service": "dsm",
-  "forwardPorts": [5000],
-  "dockerComposeFile": ".github/codespaces.yml"
-}

.devcontainer/devcontainer.json

@@ -0,0 +1,20 @@
+{
+  "name": "Virtual DSM",
+  "service": "dsm",
+  "containerEnv": {
+    "RAM_SIZE": "max",
+    "DISK_SIZE": "max",
+    "CPU_CORES": "max"
+  },  
+  "forwardPorts": [5000],  
+  "portsAttributes": {
+    "5000": {
+      "label": "Web",
+      "onAutoForward": "openBrowser"
+    }
+  },
+  "otherPortsAttributes": {
+    "onAutoForward": "silent"
+  }, 
+  "dockerComposeFile": "codespaces.yml"
+}

readme.md

@@ -124,7 +124,7 @@ kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/m
 
 ### How do I change the amount of CPU or RAM?
 
-  By default, the container will be allowed to use a maximum of 2 CPU cores and 2 GB of RAM.
+  By default, Virtual DSM will be allowed to use 2 CPU cores and 2 GB of RAM.
 
   If you want to adjust this, you can specify the desired amount using the following environment variables:
 

src/config.sh

@@ -14,28 +14,88 @@ ARGS=$(echo "$ARGS" | sed 's/\t/ /g' | tr -s ' ')
 
 # Check available memory as the very last step
 
-if [[ "$RAM_CHECK" != [Nn]* ]]; then
+RAM_AVAIL=$(free -b | grep -m 1 Mem: | awk '{print $7}')
+  
+if [[ "$RAM_CHECK" != [Nn]* && "${RAM_SIZE,,}" != "max" && "${RAM_SIZE,,}" != "half" ]]; then
 
-  RAM_AVAIL=$(free -b | grep -m 1 Mem: | awk '{print $7}')
   AVAIL_MEM=$(formatBytes "$RAM_AVAIL")
 
   if (( (RAM_WANTED + RAM_SPARE) > RAM_AVAIL )); then
-    msg="Your configured RAM_SIZE of ${RAM_SIZE/G/ GB} is too high for the $AVAIL_MEM of memory available, please set a lower value."
+    msg="Your configured RAM_SIZE of ${RAM_SIZE/G/ GB} is too high for the $AVAIL_MEM of memory available,"
-    [[ "${FS,,}" != "zfs" ]] && error "$msg" && exit 17
+    if [[ "${FS,,}" == "zfs" ]]; then
-    info "$msg"
+      info "$msg but since ZFS is active this will be ignored."
+    else
+      RAM_SIZE="max"
+      warn "$msg it will automatically be adjusted to a lower amount."
+    fi
   else
     if (( (RAM_WANTED + (RAM_SPARE * 3)) > RAM_AVAIL )); then
-      msg="your configured RAM_SIZE of ${RAM_SIZE/G/ GB} is very close to the $AVAIL_MEM of memory available, please consider a lower value."
+      msg="your configured RAM_SIZE of ${RAM_SIZE/G/ GB} is very close to the $AVAIL_MEM of memory available,"
-      if [[ "${FS,,}" != "zfs" ]]; then
+      if [[ "${FS,,}" == "zfs" ]]; then
-        warn "$msg"
+        info "$msg but since ZFS is active this will be ignored."
       else
-        info "$msg"
+        warn "$msg please consider a lower amount."
       fi
     fi
   fi
 
 fi
 
+if [[ "${RAM_SIZE,,}" == "half" ]]; then
+
+  RAM_WANTED=$(( RAM_AVAIL / 2 ))
+  RAM_WANTED=$(( RAM_WANTED / 1073741825 ))
+
+  if (( "$RAM_WANTED" < 1 )); then
+    RAM_WANTED=$(( RAM_AVAIL / 2 ))
+    RAM_WANTED=$(( RAM_WANTED / 1048577 ))
+    RAM_SIZE="${RAM_WANTED}M"
+  else
+    RAM_SIZE="${RAM_WANTED}G"
+  fi
+
+fi
+
+if [[ "${RAM_SIZE,,}" == "max" ]]; then
+
+  RAM_WANTED=$(( RAM_AVAIL - (RAM_SPARE * 3) ))
+  RAM_WANTED=$(( RAM_WANTED / 1073741825 ))
+
+  if (( "$RAM_WANTED" < 1 )); then
+
+    RAM_WANTED=$(( RAM_AVAIL - (RAM_SPARE * 2) ))
+    RAM_WANTED=$(( RAM_WANTED / 1073741825 ))
+
+    if (( "$RAM_WANTED" < 1 )); then
+
+      RAM_WANTED=$(( RAM_AVAIL - RAM_SPARE ))
+      RAM_WANTED=$(( RAM_WANTED / 1073741825 ))
+
+      if (( "$RAM_WANTED" < 1 )); then
+  
+        RAM_WANTED=$(( RAM_AVAIL - RAM_SPARE ))
+        RAM_WANTED=$(( RAM_WANTED / 1048577 ))
+  
+        if (( "$RAM_WANTED" < 1 )); then
+
+          RAM_WANTED=$(( RAM_AVAIL ))
+          RAM_WANTED=$(( RAM_WANTED / 1048577 ))
+            
+        fi
+
+        RAM_SIZE="${RAM_WANTED}M"
+      else
+        RAM_SIZE="${RAM_WANTED}G"
+      fi
+    else
+      RAM_SIZE="${RAM_WANTED}G"
+    fi
+  else
+    RAM_SIZE="${RAM_WANTED}G"
+  fi
+  
+fi
+
 if [[ "$DEBUG" == [Yy1]* ]]; then
   printf "QEMU arguments:\n\n%s\n\n" "${ARGS// -/$'\n-'}"
 fi

src/network.sh

@@ -131,7 +131,7 @@ configureDNS() {
   rm -f "$log"
 
   case "${NETWORK,,}" in
-    "nat" | "tap" | "tun" | "tuntap" | "y" )
+    "tap" | "tun" | "tuntap" | "y" )
 
       # Create lease file for faster resolve
       echo "0 $mac $ip $host 01:$mac" > /var/lib/misc/dnsmasq.leases
@@ -786,7 +786,7 @@ else
 
   case "${NETWORK,,}" in
     "user"* | "passt" | "slirp" ) ;;
-    "nat" | "tap" | "tun" | "tuntap" | "y" )
+    "tap" | "tun" | "tuntap" | "y" )
 
       # Configure tap interface
       if ! configureNAT; then
@@ -803,7 +803,7 @@ else
   [[ "${NETWORK,,}" == "user"* ]] && NETWORK="passt"
 
   case "${NETWORK,,}" in
-    "nat" | "tap" | "tun" | "tuntap" | "y" ) ;;
+    "tap" | "tun" | "tuntap" | "y" ) ;;
     "passt" )
 
       # Configure for user-mode networking (passt)

src/reset.sh

@@ -105,20 +105,18 @@ RAM_TOTAL=$(free -b | grep -m 1 Mem: | awk '{print $2}')
 RAM_SIZE="${RAM_SIZE// /}"
 [ -z "$RAM_SIZE" ] && error "RAM_SIZE not specified!" && exit 16
 
-if [[ "${RAM_SIZE,,}" == "max" ]]; then
+if [[ "${RAM_SIZE,,}" != "max" && "${RAM_SIZE,,}" != "half" ]]; then
-  RAM_WANTED=$(( RAM_AVAIL - RAM_SPARE - RAM_SPARE ))
-  RAM_WANTED=$(( RAM_WANTED / 1073741825 ))
-  RAM_SIZE="${RAM_WANTED}G"
-fi
 
-if [ -z "${RAM_SIZE//[0-9. ]}" ]; then
+  if [ -z "${RAM_SIZE//[0-9. ]}" ]; then
-  [ "${RAM_SIZE%%.*}" -lt "130" ] && RAM_SIZE="${RAM_SIZE}G" || RAM_SIZE="${RAM_SIZE}M"
+    [ "${RAM_SIZE%%.*}" -lt "130" ] && RAM_SIZE="${RAM_SIZE}G" || RAM_SIZE="${RAM_SIZE}M"
-fi
+  fi
 
-RAM_SIZE=$(echo "${RAM_SIZE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
+  RAM_SIZE=$(echo "${RAM_SIZE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
-! numfmt --from=iec "$RAM_SIZE" &>/dev/null && error "Invalid RAM_SIZE: $RAM_SIZE" && exit 16
+  ! numfmt --from=iec "$RAM_SIZE" &>/dev/null && error "Invalid RAM_SIZE: $RAM_SIZE" && exit 16
-RAM_WANTED=$(numfmt --from=iec "$RAM_SIZE")
+  RAM_WANTED=$(numfmt --from=iec "$RAM_SIZE")
-[ "$RAM_WANTED" -lt "136314880 " ] && error "RAM_SIZE is too low: $RAM_SIZE" && exit 16
+  [ "$RAM_WANTED" -lt "136314880 " ] && error "RAM_SIZE is too low: $RAM_SIZE" && exit 16
+
+fi
 
 # Print system info
 SYS="${SYS/-generic/}"
@@ -133,15 +131,6 @@ TOTAL_MEM=$(formatBytes "$RAM_TOTAL" "up")
 echo "❯ CPU: ${CPU} | RAM: ${AVAIL_MEM/ GB/}/$TOTAL_MEM | DISK: $SPACE_GB (${FS}) | KERNEL: ${SYS}..."
 echo
 
-# Check available memory
-
-if [[ "$RAM_CHECK" != [Nn]* ]] && (( (RAM_WANTED + RAM_SPARE) > RAM_AVAIL )); then
-  AVAIL_MEM=$(formatBytes "$RAM_AVAIL")
-  msg="Your configured RAM_SIZE of ${RAM_SIZE/G/ GB} is too high for the $AVAIL_MEM of memory available, please set a lower value."
-  [[ "${FS,,}" != "zfs" ]] && error "$msg" && exit 17
-  info "$msg"
-fi
-
 # Check KVM support
 
 if [[ "${PLATFORM,,}" == "x64" ]]; then