diff --git a/src/disk.sh b/src/disk.sh
index 83f6fad..d0d8409 100644
--- a/src/disk.sh
+++ b/src/disk.sh
@@ -87,6 +87,16 @@ isCow() {
   return 1
 }
 
+supportsDirect() {
+  local FS=$1
+
+  if [[ "${FS,,}" == "ecryptfs" ]] || [[ "${FS,,}" == "tmpfs" ]]; then
+    return 1
+  fi
+
+  return 0
+}
+
 createDisk() {
   local DISK_FILE=$1
   local DISK_SPACE=$2
@@ -329,6 +339,10 @@ checkFS () {
     info "Warning: the filesystem of $DIR is FUSE, this extra layer will negatively affect performance!"
   fi
 
+  if ! supportsDirect "$FS"; then
+    info "Warning: the filesystem of $DIR is $FS, which does not support O_DIRECT mode, adjusting settings..."
+  fi
+
   if isCow "$FS"; then
     if [ -f "$DISK_FILE" ]; then
       FA=$(lsattr "$DISK_FILE")
@@ -348,23 +362,30 @@ createDevice () {
   local DISK_INDEX=$3
   local DISK_ADDRESS=$4
   local DISK_FMT=$5
+  local DISK_IO=$6
+  local DISK_CACHE=$7
 
-  echo "-drive file=$DISK_FILE,if=none,id=drive-$DISK_ID,format=$DISK_FMT,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on \
+  local result="-drive file=$DISK_FILE,if=none,id=drive-$DISK_ID,format=$DISK_FMT,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on"
+
+  result="$result \
     -device virtio-scsi-pci,id=hw-$DISK_ID,iothread=io2,bus=pcie.0,addr=$DISK_ADDRESS \
     -device scsi-hd,bus=hw-$DISK_ID.0,channel=0,scsi-id=0,lun=0,drive=drive-$DISK_ID,id=$DISK_ID,rotation_rate=$DISK_ROTATION,bootindex=$DISK_INDEX"
 
+  echo "$result"
   return 0
 }
 
 addDisk () {
-  local DISK_ID=$1
-  local DISK_BASE=$2
-  local DISK_EXT=$3
-  local DISK_DESC=$4
-  local DISK_SPACE=$5
-  local DISK_INDEX=$6
-  local DISK_ADDRESS=$7
-  local DISK_FMT=$8
+  local DISK_BASE=$1
+  local DISK_EXT=$2
+  local DISK_DESC=$3
+  local DISK_SPACE=$4
+  local DISK_INDEX=$5
+  local DISK_ADDRESS=$6
+  local DISK_FMT=$7
+  local DISK_IO=$8
+  local DISK_CACHE=$9
+  local DISK_ID="userdata$DISK_INDEX"
   local DISK_FILE="$DISK_BASE.$DISK_EXT"
   local DIR DATA_SIZE FS PREV_FMT PREV_EXT CUR_SIZE OPTS
 
@@ -386,6 +407,11 @@ addDisk () {
   FS=$(stat -f -c %T "$DIR")
   checkFS "$FS" "$DISK_FILE" "$DISK_DESC" || exit $?
 
+  if ! supportsDirect "$FS"; then
+    DISK_IO="threads"
+    DISK_CACHE="writeback"
+  fi
+
   if ! [ -s "$DISK_FILE" ] ; then
 
     if [[ "${DISK_FMT,,}" != "raw" ]]; then
@@ -414,7 +440,7 @@ addDisk () {
 
   fi
 
-  OPTS=$(createDevice "$DISK_ID" "$DISK_FILE" "$DISK_INDEX" "$DISK_ADDRESS" "$DISK_FMT")
+  OPTS=$(createDevice "$DISK_ID" "$DISK_FILE" "$DISK_INDEX" "$DISK_ADDRESS" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE")
   DISK_OPTS="$DISK_OPTS $OPTS"
 
   return 0
@@ -422,17 +448,17 @@ addDisk () {
 
 addDevice () {
 
-  local DISK_ID=$1
-  local DISK_DEV=$2
-  local DISK_DESC=$3
-  local DISK_INDEX=$4
-  local DISK_ADDRESS=$5
+  local DISK_DEV=$1
+  local DISK_DESC=$2
+  local DISK_INDEX=$3
+  local DISK_ADDRESS=$4
+  local DISK_ID="userdata$DISK_INDEX"
 
   [ -z "$DISK_DEV" ] && return 0
   [ ! -b "$DISK_DEV" ] && error "Device $DISK_DEV cannot be found! Please add it to the 'devices' section of your compose file." && exit 55
 
   local OPTS
-  OPTS=$(createDevice "$DISK_ID" "$DISK_DEV" "$DISK_INDEX" "$DISK_ADDRESS" "raw")
+  OPTS=$(createDevice "$DISK_ID" "$DISK_DEV" "$DISK_INDEX" "$DISK_ADDRESS" "raw" "$DISK_IO" "$DISK_CACHE")
   DISK_OPTS="$DISK_OPTS $OPTS"
 
   return 0
@@ -502,27 +528,27 @@ DISK4_FILE="/storage4/data4"
 : "${DEVICE4:=""}"
 
 if [ -n "$DEVICE" ]; then
-  addDevice "userdata" "$DEVICE" "device" "3" "0xc" || exit $?
+  addDevice "$DEVICE" "device" "3" "0xc" || exit $?
 else
-  addDisk "userdata" "$DISK1_FILE" "$DISK_EXT" "disk" "$DISK_SIZE" "3" "0xc" "$DISK_FMT" || exit $?
+  addDisk "$DISK1_FILE" "$DISK_EXT" "disk" "$DISK_SIZE" "3" "0xc" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE" || exit $?
 fi
 
 if [ -n "$DEVICE2" ]; then
-  addDevice "userdata2" "$DEVICE2" "device2" "4" "0xd" || exit $?
+  addDevice "$DEVICE2" "device2" "4" "0xd" || exit $?
 else
-  addDisk "userdata2" "$DISK2_FILE" "$DISK_EXT" "disk2" "$DISK2_SIZE" "4" "0xd" "$DISK_FMT" || exit $?
+  addDisk "$DISK2_FILE" "$DISK_EXT" "disk2" "$DISK2_SIZE" "4" "0xd" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE" || exit $?
 fi
 
 if [ -n "$DEVICE3" ]; then
-  addDevice "userdata3" "$DEVICE3" "device3" "5" "0xe" || exit $?
+  addDevice "$DEVICE3" "device3" "5" "0xe" || exit $?
 else
-  addDisk "userdata3" "$DISK3_FILE" "$DISK_EXT" "disk3" "$DISK3_SIZE" "5" "0xe" "$DISK_FMT" || exit $?
+  addDisk "$DISK3_FILE" "$DISK_EXT" "disk3" "$DISK3_SIZE" "5" "0xe" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE" || exit $?
 fi
 
 if [ -n "$DEVICE4" ]; then
-  addDevice "userdata4" "$DEVICE4" "device4" "6" "0xf" || exit $?
+  addDevice "$DEVICE4" "device4" "6" "0xf" || exit $?
 else
-  addDisk "userdata4" "$DISK4_FILE" "$DISK_EXT" "disk4" "$DISK4_SIZE" "6" "0xf" "$DISK_FMT" || exit $?
+  addDisk "$DISK4_FILE" "$DISK_EXT" "disk4" "$DISK4_SIZE" "6" "0xf" "$DISK_FMT" "$DISK_IO" "$DISK_CACHE" || exit $?
 fi
 
 html "Initialized disks successfully..."
diff --git a/src/install.sh b/src/install.sh
index a612adc..0d45cbe 100644
--- a/src/install.sh
+++ b/src/install.sh
@@ -66,6 +66,10 @@ if [[ "${FS,,}" == "fuse"* ]]; then
   info "Warning: the filesystem of $STORAGE is FUSE, this extra layer will negatively affect performance!"
 fi
 
+if [[ "${FS,,}" == "ecryptfs" ]] || [[ "${FS,,}" == "tmpfs" ]]; then
+  info "Warning: the filesystem of $STORAGE is $FS, which does not support O_DIRECT mode, adjusting settings..."
+fi
+
 if [[ "${FS,,}" == "fat"* || "${FS,,}" == "vfat"* || "${FS,,}" == "msdos"* ]]; then
   error "Unable to install on $FS filesystems, please use a different filesystem for /storage." && exit 61
 fi
diff --git a/src/reset.sh b/src/reset.sh
index f142a51..a9e414d 100644
--- a/src/reset.sh
+++ b/src/reset.sh
@@ -58,8 +58,15 @@ if [ ! -d "$STORAGE" ]; then
   error "Storage folder ($STORAGE) not found!" && exit 13
 fi
 
-# Print system info
+# Check filesystem
 FS=$(stat -f -c %T "$STORAGE")
+
+if [[ "${FS,,}" == "ecryptfs" ]] || [[ "${FS,,}" == "tmpfs" ]]; then
+  DISK_IO="threads"
+  DISK_CACHE="writeback"
+fi
+
+# Print system info
 FS="${FS/ext2\/ext3/ext4}";
 SPACE=$(df --output=avail -B 1 "$STORAGE" | tail -n 1)
 SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))