fix: Simplify healthcheck

fix: Simplify healthcheck

.github/renovate.json

@@ -1,6 +1,4 @@
 {
-  "extends": [
-    "config:base",
-    ":disableDependencyDashboard"
-  ]
+  "$schema": "https://docs.renovatebot.com/renovate-schema.json",
+  "extends": ["config:recommended", ":disableDependencyDashboard"]
 }

.github/workflows/build.yml

@@ -79,16 +79,14 @@ jobs:
           labels: ${{ steps.meta.outputs.labels }}
           annotations: ${{ steps.meta.outputs.annotations }}
           build-args: |
-            VCS_REF=${GITHUB_SHA::8}
             VERSION_ARG=${{ steps.meta.outputs.version }}
       -
         name: Create a release
         uses: action-pack/github-release@v2
-        env:
-          GITHUB_TOKEN: ${{ secrets.REPO_ACCESS_TOKEN }}
         with:
           tag: "v${{ steps.meta.outputs.version }}"
           title: "v${{ steps.meta.outputs.version }}"
+          token: ${{ secrets.REPO_ACCESS_TOKEN }}
       -
         name: Increment version variable
         uses: action-pack/bump@v2

Dockerfile

@@ -28,6 +28,7 @@ RUN apt-get update && apt-get -y upgrade && \
         iproute2 \
         dnsmasq \
         net-tools \
+        qemu-utils \
         ca-certificates \
         netcat-openbsd \
         qemu-system-x86 \

docker-compose.yml

@@ -20,4 +20,4 @@ services:
         volumes:
             - /opt/dsm:/storage
         restart: on-failure
-        stop_grace_period: 1m
+        stop_grace_period: 2m

readme.md

@@ -41,7 +41,7 @@ services:
     volumes:
       - /opt/dsm:/storage
     restart: on-failure
-    stop_grace_period: 1m
+    stop_grace_period: 2m
 ```
 
 Via `docker run`
@@ -87,16 +87,16 @@ docker run -it --rm -p 5000:5000 --device=/dev/kvm --cap-add NET_ADMIN --stop-ti
       - /mnt/data/example:/storage3
     ```
 
-  * ### How do I change the space reserved by the virtual disk? 
+  * ### How do I create a growable disk?
 
-    By default, the entire disk space is reserved in advance. To create a growable disk that only reserves the space that is actually used, add the following environment variable:
+    By default, the entire capacity of the disk is reserved in advance. To create a growable disk that only allocates space that is actually used, add the following environment variable:
 
     ```yaml
     environment:
-      ALLOCATE: "N"
+      DISK_FMT: "qcow2"
     ```
 
-    Keep in mind that this will not affect any of your existing disks, it only applies to newly created disks.
+    This can also be used to convert any existing disks to the ```qcow2``` format.
 
   * ### How do I increase the amount of CPU or RAM?
 

src/check.sh

@@ -1,61 +1,17 @@
 #!/usr/bin/env bash
-set -u
+set -Eeuo pipefail
 
 [ ! -f "/run/qemu.pid" ] && echo "QEMU not running yet.." && exit 0
 [ -f "/run/qemu.count" ] && echo "QEMU is shutting down.." && exit 1
 
 file="/run/dsm.url"
+[ ! -f  "$file" ] && echo "DSM has not enabled networking yet.." && exit 1
 
-if [ ! -f  "$file" ]; then
-
-  # Retrieve IP from guest VM for Docker healthcheck
-  RESPONSE=$(curl -s -m 30 -S http://127.0.0.1:2210/read?command=10 2>&1)
-
-  if [[ ! "${RESPONSE}" =~ "\"success\"" ]] ; then
-    echo "Failed to connect to guest: $RESPONSE" && exit 1
-  fi
-
-  # Retrieve the HTTP port number
-  if [[ ! "${RESPONSE}" =~ "\"http_port\"" ]] ; then
-    echo "Failed to parse response from guest: $RESPONSE" && exit 1
-  fi
-
-  rest=${RESPONSE#*http_port}
-  rest=${rest#*:}
-  rest=${rest%%,*}
-  PORT=${rest%%\"*}
-
-  [ -z "${PORT}" ] && echo "Guest has not set a portnumber yet.." && exit 1
-
-  # Retrieve the IP address
-  if [[ ! "${RESPONSE}" =~ "eth0" ]] ; then
-    echo "Failed to parse response from guest: $RESPONSE" && exit 1
-  fi
-
-  rest=${RESPONSE#*eth0}
-  rest=${rest#*ip}
-  rest=${rest#*:}
-  rest=${rest#*\"}
-  IP=${rest%%\"*}
-
-  [ -z "${IP}" ] && echo "Guest has not received an IP yet.." && exit 1
-
-  echo "${IP}:${PORT}" > $file
+location=$(cat "$file")
 
+if ! curl -m 20 -ILfSs "http://$location/" > /dev/null; then
+  echo "Failed to reach page at http://$location" && exit 1
 fi
 
-LOCATION=$(cat "$file")
-
-if ! curl -m 20 -ILfSs "http://${LOCATION}/" > /dev/null; then
-  rm -f $file
-  echo "Failed to reach http://${LOCATION}"
-  exit 1
-fi
-
-if [[ "$LOCATION" == "20.20"* ]]; then
-  echo "Healthcheck OK"
-else
-  echo "Healthcheck OK ( ${LOCATION%:*} )"
-fi
-
+echo "Healthcheck OK"
 exit 0

src/config.sh

@@ -12,29 +12,29 @@ else
   [ -e /dev/kvm ] && KVM_ERR="(no write access)" || KVM_ERR="(device file missing)"
 fi
 
-if [ -n "${KVM_ERR}" ]; then
+if [ -n "$KVM_ERR" ]; then
   if [ "$ARCH" == "amd64" ]; then
-    error "KVM acceleration not detected ${KVM_ERR}, see the FAQ about this."
-    [[ "${DEBUG}" != [Yy1]* ]] && exit 88
+    error "KVM acceleration not detected $KVM_ERR, see the FAQ about this."
+    [[ "$DEBUG" != [Yy1]* ]] && exit 88
   fi
 else
   KVM_OPTS=",accel=kvm -enable-kvm -cpu host"
 fi
 
 DEF_OPTS="-nographic -nodefaults -boot strict=on -display none"
-RAM_OPTS=$(echo "-m ${RAM_SIZE}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
-CPU_OPTS="-smp ${CPU_CORES},sockets=1,dies=1,cores=${CPU_CORES},threads=1"
+RAM_OPTS=$(echo "-m $RAM_SIZE" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
+CPU_OPTS="-smp $CPU_CORES,sockets=1,dies=1,cores=$CPU_CORES,threads=1"
 MAC_OPTS="-machine type=q35,usb=off,dump-guest-core=off,hpet=off${KVM_OPTS}"
 EXTRA_OPTS="-device virtio-balloon-pci,id=balloon0,bus=pcie.0,addr=0x4"
 EXTRA_OPTS="$EXTRA_OPTS -object rng-random,id=objrng0,filename=/dev/urandom"
 EXTRA_OPTS="$EXTRA_OPTS -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pcie.0,addr=0x1c"
 
-if [[ "${GPU}" == [Yy1]* ]] && [[ "$ARCH" == "amd64" ]]; then
+if [[ "$GPU" == [Yy1]* ]] && [[ "$ARCH" == "amd64" ]]; then
   DEF_OPTS="-nodefaults -boot strict=on -display egl-headless,rendernode=/dev/dri/renderD128"
-  DEF_OPTS="${DEF_OPTS} -device virtio-vga,id=video0,max_outputs=1,bus=pcie.0,addr=0x1"
+  DEF_OPTS="$DEF_OPTS -device virtio-vga,id=video0,max_outputs=1,bus=pcie.0,addr=0x1"
 fi
 
-ARGS="${DEF_OPTS} ${CPU_OPTS} ${RAM_OPTS} ${MAC_OPTS} ${MON_OPTS} ${SERIAL_OPTS} ${NET_OPTS} ${DISK_OPTS} ${EXTRA_OPTS} ${ARGUMENTS}"
+ARGS="$DEF_OPTS $CPU_OPTS $RAM_OPTS $MAC_OPTS $MON_OPTS $SERIAL_OPTS $NET_OPTS $DISK_OPTS $EXTRA_OPTS $ARGUMENTS"
 ARGS=$(echo "$ARGS" | sed 's/\t/ /g' | tr -s ' ')
 
 return 0

src/disk.sh

@@ -4,6 +4,7 @@ set -Eeuo pipefail
 # Docker environment variables
 
 : ${DISK_IO:='native'}    # I/O Mode, can be set to 'native', 'threads' or 'io_turing'
+: ${DISK_FMT:='raw'}      # Disk file format, 'raw' by default for best performance
 : ${DISK_CACHE:='none'}   # Caching mode, can be set to 'writeback' for better performance
 : ${DISK_DISCARD:='on'}   # Controls whether unmap (TRIM) commands are passed to the host.
 : ${DISK_ROTATION:='1'}   # Rotation rate, set to 1 for SSD storage and increase for HDD
@@ -16,163 +17,300 @@ SYSTEM="$STORAGE/$BASE.system.img"
 
 DISK_OPTS="\
     -device virtio-scsi-pci,id=hw-synoboot,bus=pcie.0,addr=0xa \
-    -drive file=${BOOT},if=none,id=drive-synoboot,format=raw,cache=${DISK_CACHE},aio=${DISK_IO},discard=${DISK_DISCARD},detect-zeroes=on \
-    -device scsi-hd,bus=hw-synoboot.0,channel=0,scsi-id=0,lun=0,drive=drive-synoboot,id=synoboot0,rotation_rate=${DISK_ROTATION},bootindex=1 \
+    -drive file=$BOOT,if=none,id=drive-synoboot,format=raw,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on \
+    -device scsi-hd,bus=hw-synoboot.0,channel=0,scsi-id=0,lun=0,drive=drive-synoboot,id=synoboot0,rotation_rate=$DISK_ROTATION,bootindex=1 \
     -device virtio-scsi-pci,id=hw-synosys,bus=pcie.0,addr=0xb \
-    -drive file=${SYSTEM},if=none,id=drive-synosys,format=raw,cache=${DISK_CACHE},aio=${DISK_IO},discard=${DISK_DISCARD},detect-zeroes=on \
-    -device scsi-hd,bus=hw-synosys.0,channel=0,scsi-id=0,lun=0,drive=drive-synosys,id=synosys0,rotation_rate=${DISK_ROTATION},bootindex=2"
+    -drive file=$SYSTEM,if=none,id=drive-synosys,format=raw,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on \
+    -device scsi-hd,bus=hw-synosys.0,channel=0,scsi-id=0,lun=0,drive=drive-synosys,id=synosys0,rotation_rate=$DISK_ROTATION,bootindex=2"
+
+fmt2ext() {
+  local DISK_FMT=$1
+
+  case "${DISK_FMT,,}" in
+    qcow2)
+      echo "qcow2"
+      ;;
+    raw)
+      echo "img"
+      ;;
+    *)
+      error "Unrecognized disk format: $DISK_FMT" && exit 88
+      ;;
+  esac
+}
+
+ext2fmt() {
+  local DISK_EXT=$1
+
+  case "${DISK_EXT,,}" in
+    qcow2)
+      echo "qcow2"
+      ;;
+    img)
+      echo "raw"
+      ;;
+    *)
+      error "Unrecognized file extension: .$DISK_EXT" && exit 88
+      ;;
+  esac
+}
+
+getSize() {
+  local DISK_FILE=$1
+  local DISK_EXT DISK_FMT
+
+  DISK_EXT="$(echo "${DISK_FILE//*./}" | sed 's/^.*\.//')"
+  DISK_FMT="$(ext2fmt "$DISK_EXT")"
+
+  case "${DISK_FMT,,}" in
+    raw)
+      stat -c%s "$DISK_FILE"
+      ;;
+    qcow2)
+      qemu-img info "$DISK_FILE" -f "$DISK_FMT" | grep '^virtual size: ' | sed 's/.*(\(.*\) bytes)/\1/'
+      ;;
+    *)
+      error "Unrecognized disk format: $DISK_FMT" && exit 88
+      ;;
+  esac
+}
+
+resizeDisk() {
+  local DISK_FILE=$1
+  local CUR_SIZE=$2
+  local DATA_SIZE=$3
+  local DISK_SPACE=$4
+  local DISK_DESC=$5
+  local DISK_FMT=$6
+  local GB REQ FAIL SPACE SPACE_GB
+
+  GB=$(( (CUR_SIZE + 1073741823)/1073741824 ))
+  info "Resizing $DISK_DESC from ${GB}G to $DISK_SPACE .."
+  FAIL="Could not resize $DISK_FMT file of $DISK_DESC ($DISK_FILE) from ${GB}G to $DISK_SPACE .."
+
+  REQ=$((DATA_SIZE-CUR_SIZE))
+  (( REQ < 1 )) && error "Shrinking disks is not supported!" && exit 84
+
+  case "${DISK_FMT,,}" in
+    raw)
+      if [[ "$ALLOCATE" == [Nn]* ]]; then
+
+        # Resize file by changing its length
+        if ! truncate -s "$DISK_SPACE" "$DISK_FILE"; then
+          error "$FAIL" && exit 85
+        fi
+
+      else
+
+        # Check free diskspace
+        SPACE=$(df --output=avail -B 1 "$DIR" | tail -n 1)
+        SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
+
+        if (( REQ > SPACE )); then
+          error "Not enough free space to resize $DISK_DESC to $DISK_SPACE in $DIR, it has only $SPACE_GB GB available.."
+          error "Please specify a smaller ${DISK_DESC^^}_SIZE or disable preallocation by setting DISK_FMT to \"qcow2\"." && exit 84
+        fi
+
+        # Resize file by allocating more space
+        if ! fallocate -l "$DISK_SPACE" "$DISK_FILE"; then
+          if ! truncate -s "$DISK_SPACE" "$DISK_FILE"; then
+            error "$FAIL" && exit 85
+          fi
+        fi
+
+      fi
+      ;;
+    qcow2)
+      if ! qemu-img resize -f "$DISK_FMT" "$DISK_FILE" "$DISK_SPACE" ; then
+        error "$FAIL" && exit 85
+      fi
+      ;;
+  esac
+}
+
+convertDisk() {
+  local CONV_FLAGS="-p"
+  local SOURCE_FILE=$1
+  local SOURCE_FMT=$2
+  local DST_FILE=$3
+  local DST_FMT=$4
+
+  case "$DST_FMT" in
+    qcow2)
+      CONV_FLAGS="$CONV_FLAGS -c"
+      ;;
+  esac
+
+  # shellcheck disable=SC2086
+  qemu-img convert $CONV_FLAGS -f "$SOURCE_FMT" -O "$DST_FMT" -- "$SOURCE_FILE" "$DST_FILE"
+}
+
+createDisk() {
+  local DISK_FILE=$1
+  local DISK_SPACE=$2
+  local DISK_DESC=$3
+  local DISK_FMT=$4
+  local GB FAIL SPACE SPACE_GB
+
+  FAIL="Could not create a $DISK_SPACE $DISK_FMT file for $DISK_DESC ($DISK_FILE)"
+
+  case "${DISK_FMT,,}" in
+    raw)
+      if [[ "$ALLOCATE" == [Nn]* ]]; then
+
+        # Create an empty file
+        if ! truncate -s "$DISK_SPACE" "$DISK_FILE"; then
+          rm -f "$DISK_FILE"
+          error "$FAIL" && exit 87
+        fi
+
+      else
+
+        # Check free diskspace
+        SPACE=$(df --output=avail -B 1 "$DIR" | tail -n 1)
+        SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
+
+        if (( DATA_SIZE > SPACE )); then
+          error "Not enough free space to create a $DISK_DESC of $DISK_SPACE in $DIR, it has only $SPACE_GB GB available.."
+          error "Please specify a smaller ${DISK_DESC^^}_SIZE or disable preallocation by setting DISK_FMT to \"qcow2\"." && exit 86
+        fi
+
+        # Create an empty file
+        if ! fallocate -l "$DISK_SPACE" "$DISK_FILE"; then
+          if ! truncate -s "$DISK_SPACE" "$DISK_FILE"; then
+            rm -f "$DISK_FILE"
+            error "$FAIL" && exit 87
+          fi
+        fi
+
+      fi
+      ;;
+    qcow2)
+      if ! qemu-img create -f "$DISK_FMT" -- "$DISK_FILE" "$DISK_SPACE" ; then
+        rm -f "$DISK_FILE"
+        error "$FAIL" && exit 89
+      fi
+      ;;
+  esac
+}
 
 addDisk () {
-
-  local FS
-  local GB
-  local DIR
-  local REQ
-  local SPACE
-  local CUR_SIZE
-  local DATA_SIZE
   local DISK_ID=$1
-  local DISK_FILE=$2
-  local DISK_DESC=$3
-  local DISK_SPACE=$4
-  local DISK_INDEX=$5
-  local DISK_ADDRESS=$6
+  local DISK_BASE=$2
+  local DISK_EXT=$3
+  local DISK_DESC=$4
+  local DISK_SPACE=$5
+  local DISK_INDEX=$6
+  local DISK_ADDRESS=$7
+  local DISK_FMT=$8
+  local FS DIR CUR_SIZE DATA_SIZE DISK_FILE
+
+  DISK_FILE="$DISK_BASE.$DISK_EXT"
+  DIR=$(dirname "$DISK_FILE")
+  [ ! -d "$DIR" ] && return 0
 
-  DIR=$(dirname "${DISK_FILE}")
-  [ ! -d "${DIR}" ] && return 0
-  
   FS=$(stat -f -c %T "$DIR")
-
   if [[ "$FS" == "overlay"* ]]; then
-    info "Warning: the filesystem of ${DIR} is OverlayFS, this usually means it was binded to an invalid path!"
+    info "Warning: the filesystem of $DIR is OverlayFS, this usually means it was binded to an invalid path!"
   fi
 
   [ -z "$DISK_SPACE" ] && DISK_SPACE="16G"
-  DISK_SPACE=$(echo "${DISK_SPACE}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
-  DATA_SIZE=$(numfmt --from=iec "${DISK_SPACE}")
+  DISK_SPACE=$(echo "$DISK_SPACE" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
+  DATA_SIZE=$(numfmt --from=iec "$DISK_SPACE")
 
   if (( DATA_SIZE < 6442450944 )); then
     error "Please increase ${DISK_DESC^^}_SIZE to at least 6 GB." && exit 83
   fi
 
-  if [ -f "${DISK_FILE}" ]; then
+  if ! [ -f "$DISK_FILE" ] ; then
+    local PREV_EXT PREV_FMT PREV_FILE TMP_FILE
 
-    CUR_SIZE=$(stat -c%s "${DISK_FILE}")
+    if [[ "${DISK_FMT,,}" != "raw" ]]; then
+      PREV_FMT="raw"
+    else
+      PREV_FMT="qcow2"
+    fi
+    PREV_EXT="$(fmt2ext "$PREV_FMT")"
+    PREV_FILE="$DISK_BASE.$PREV_EXT"
+
+    if [ -f "$PREV_FILE" ] ; then
+
+      info "Detected that ${DISK_DESC^^}_FMT changed from \"$PREV_FMT\" to \"$DISK_FMT\"."
+      info "Starting conversion of $DISK_DESC to this new format, please wait until completed..."
+
+      TMP_FILE="$DISK_BASE.tmp"
+      rm -f "$TMP_FILE"
+
+      if ! convertDisk "$PREV_FILE" "$PREV_FMT" "$TMP_FILE" "$DISK_FMT" ; then
+        rm -f "$TMP_FILE"
+        error "Failed to convert $DISK_DESC to $DISK_FMT format." && exit 89
+      fi
+
+      mv "$TMP_FILE" "$DISK_FILE"
+      rm -f "$PREV_FILE"
+      info "Conversion of $DISK_DESC completed succesfully!"
+    fi
+  fi
+
+  if [ -f "$DISK_FILE" ]; then
+
+    CUR_SIZE=$(getSize "$DISK_FILE")
 
     if [ "$DATA_SIZE" -gt "$CUR_SIZE" ]; then
-
-      GB=$(( (CUR_SIZE + 1073741823)/1073741824 ))
-      info "Resizing ${DISK_DESC} from ${GB}G to ${DISK_SPACE} .."
-
-      if [[ "${ALLOCATE}" == [Nn]* ]]; then
-
-        # Resize file by changing its length
-        if ! truncate -s "${DISK_SPACE}" "${DISK_FILE}"; then
-          error "Could not resize ${DISK_DESC} file (${DISK_FILE}) to ${DISK_SPACE} .." && exit 85
-        fi
-
-      else
-
-        REQ=$((DATA_SIZE-CUR_SIZE))
-
-        # Check free diskspace
-        SPACE=$(df --output=avail -B 1 "${DIR}" | tail -n 1)
-        SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-
-        if (( REQ > SPACE )); then
-          error "Not enough free space to resize ${DISK_DESC} to ${DISK_SPACE} in ${DIR}, it has only ${SPACE_GB} GB available.."
-          error "Specify a smaller ${DISK_DESC^^}_SIZE or disable preallocation with ALLOCATE=N." && exit 84
-        fi
-
-        # Resize file by allocating more space
-        if ! fallocate -l "${DISK_SPACE}" "${DISK_FILE}"; then
-          if ! truncate -s "${DISK_SPACE}" "${DISK_FILE}"; then
-            error "Could not resize ${DISK_DESC} file (${DISK_FILE}) to ${DISK_SPACE}" && exit 85
-          fi
-        fi
-
-      fi
+      resizeDisk "$DISK_FILE" "$CUR_SIZE" "$DATA_SIZE" "$DISK_SPACE" "$DISK_DESC" "$DISK_FMT" || exit $?
     fi
+
+  else
+
+    createDisk "$DISK_FILE" "$DISK_SPACE" "$DISK_DESC" "$DISK_FMT" || exit $?
+
   fi
 
-  if [ ! -f "${DISK_FILE}" ]; then
-
-    if [[ "${ALLOCATE}" == [Nn]* ]]; then
-
-      # Create an empty file
-      if ! truncate -s "${DISK_SPACE}" "${DISK_FILE}"; then
-        rm -f "${DISK_FILE}"
-        error "Could not create a ${DISK_SPACE} file for ${DISK_DESC} (${DISK_FILE})" && exit 87
-      fi
-
-    else
-
-      # Check free diskspace
-      SPACE=$(df --output=avail -B 1 "${DIR}" | tail -n 1)
-      SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-
-      if (( DATA_SIZE > SPACE )); then
-        error "Not enough free space to create ${DISK_DESC} of ${DISK_SPACE} in ${DIR}, it has only ${SPACE_GB} GB available.."
-        error "Specify a smaller ${DISK_DESC^^}_SIZE or disable preallocation with ALLOCATE=N." && exit 86
-      fi
-
-      # Create an empty file
-      if ! fallocate -l "${DISK_SPACE}" "${DISK_FILE}"; then
-        if ! truncate -s "${DISK_SPACE}" "${DISK_FILE}"; then
-          rm -f "${DISK_FILE}"
-          error "Could not create a ${DISK_SPACE} file for ${DISK_DESC} (${DISK_FILE})" && exit 87
-        fi
-      fi
-
-    fi
-  fi
-
-  DISK_OPTS="${DISK_OPTS} \
-    -device virtio-scsi-pci,id=hw-${DISK_ID},bus=pcie.0,addr=${DISK_ADDRESS} \
-    -drive file=${DISK_FILE},if=none,id=drive-${DISK_ID},format=raw,cache=${DISK_CACHE},aio=${DISK_IO},discard=${DISK_DISCARD},detect-zeroes=on \
-    -device scsi-hd,bus=hw-${DISK_ID}.0,channel=0,scsi-id=0,lun=0,drive=drive-${DISK_ID},id=${DISK_ID},rotation_rate=${DISK_ROTATION},bootindex=${DISK_INDEX}"
+  DISK_OPTS="$DISK_OPTS \
+    -device virtio-scsi-pci,id=hw-$DISK_ID,bus=pcie.0,addr=$DISK_ADDRESS \
+    -drive file=$DISK_FILE,if=none,id=drive-$DISK_ID,format=$DISK_FMT,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on \
+    -device scsi-hd,bus=hw-$DISK_ID.0,channel=0,scsi-id=0,lun=0,drive=drive-$DISK_ID,id=$DISK_ID,rotation_rate=$DISK_ROTATION,bootindex=$DISK_INDEX"
 
   return 0
 }
 
-DISK1_FILE="${STORAGE}/data.img"
+DISK_EXT="$(fmt2ext "$DISK_FMT")" || exit $?
 
-if [[ ! -f "${DISK1_FILE}" ]] && [[ -f "${STORAGE}/data${DISK_SIZE}.img" ]]; then
+DISK1_FILE="$STORAGE/data"
+if [[ ! -f "$DISK1_FILE.img" ]] && [[ -f "$STORAGE/data${DISK_SIZE}.img" ]]; then
   # Fallback for legacy installs
-  mv "${STORAGE}/data${DISK_SIZE}.img" "${DISK1_FILE}"
+  mv "$STORAGE/data${DISK_SIZE}.img" "$DISK1_FILE.img"
 fi
 
-DISK2_FILE="/storage2/data2.img"
-
-if [ ! -f "${DISK2_FILE}" ]; then
+DISK2_FILE="/storage2/data2"
+if [ ! -f "$DISK2_FILE.img" ]; then
   # Fallback for legacy installs
   FALLBACK="/storage2/data.img"
-  if [[ -f "${DISK1_FILE}" ]] && [[ -f "${FALLBACK}" ]]; then
-    SIZE1=$(stat -c%s "${FALLBACK}")
-    SIZE2=$(stat -c%s "${DISK1_FILE}")
+  if [[ -f "$DISK1_FILE.img" ]] && [[ -f "$FALLBACK" ]]; then
+    SIZE1=$(stat -c%s "$FALLBACK")
+    SIZE2=$(stat -c%s "$DISK1_FILE.img")
     if [[ SIZE1 -ne SIZE2 ]]; then
-      mv "${FALLBACK}" "${DISK2_FILE}"
+      mv "$FALLBACK" "$DISK2_FILE.img"
     fi
   fi
 fi
 
-DISK3_FILE="/storage3/data3.img"
-
-if [ ! -f "${DISK3_FILE}" ]; then
+DISK3_FILE="/storage3/data3"
+if [ ! -f "$DISK3_FILE.img" ]; then
   # Fallback for legacy installs
   FALLBACK="/storage3/data.img"
-  if [[ -f "${DISK1_FILE}" ]] && [[ -f "${FALLBACK}" ]]; then
-    SIZE1=$(stat -c%s "${FALLBACK}")
-    SIZE2=$(stat -c%s "${DISK1_FILE}")
+  if [[ -f "$DISK1_FILE.img" ]] && [[ -f "$FALLBACK" ]]; then
+    SIZE1=$(stat -c%s "$FALLBACK")
+    SIZE2=$(stat -c%s "$DISK1_FILE.img")
     if [[ SIZE1 -ne SIZE2 ]]; then
-      mv "${FALLBACK}" "${DISK3_FILE}"
+      mv "$FALLBACK" "$DISK3_FILE.img"
     fi
   fi
 fi
 
-DISK4_FILE="/storage4/data4.img"
-DISK5_FILE="/storage5/data5.img"
-DISK6_FILE="/storage6/data6.img"
+DISK4_FILE="/storage4/data4"
+DISK5_FILE="/storage5/data5"
+DISK6_FILE="/storage6/data6"
 
 : ${DISK2_SIZE:=''}
 : ${DISK3_SIZE:=''}
@@ -180,12 +318,12 @@ DISK6_FILE="/storage6/data6.img"
 : ${DISK5_SIZE:=''}
 : ${DISK6_SIZE:=''}
 
-addDisk "userdata" "${DISK1_FILE}" "disk" "${DISK_SIZE}" "3" "0xc"
-addDisk "userdata2" "${DISK2_FILE}" "disk2" "${DISK2_SIZE}" "4" "0xd"
-addDisk "userdata3" "${DISK3_FILE}" "disk3" "${DISK3_SIZE}" "5" "0xe"
-addDisk "userdata4" "${DISK4_FILE}" "disk4" "${DISK4_SIZE}" "9" "0x7"
-addDisk "userdata5" "${DISK5_FILE}" "disk5" "${DISK5_SIZE}" "10" "0x8"
-addDisk "userdata6" "${DISK6_FILE}" "disk6" "${DISK6_SIZE}" "11" "0x9"
+addDisk "userdata" "$DISK1_FILE" "$DISK_EXT" "disk" "$DISK_SIZE" "3" "0xc" "$DISK_FMT" || exit $?
+addDisk "userdata2" "$DISK2_FILE" "$DISK_EXT" "disk2" "$DISK2_SIZE" "4" "0xd" "$DISK_FMT" || exit $?
+addDisk "userdata3" "$DISK3_FILE" "$DISK_EXT" "disk3" "$DISK3_SIZE" "5" "0xe" "$DISK_FMT" || exit $?
+addDisk "userdata4" "$DISK4_FILE" "$DISK_EXT" "disk4" "$DISK4_SIZE" "9" "0x7" "$DISK_FMT" || exit $?
+addDisk "userdata5" "$DISK5_FILE" "$DISK_EXT" "disk5" "$DISK5_SIZE" "10" "0x8" "$DISK_FMT" || exit $?
+addDisk "userdata6" "$DISK6_FILE" "$DISK_EXT" "disk6" "$DISK6_SIZE" "11" "0x9" "$DISK_FMT" || exit $?
 
 addDevice () {
 
@@ -194,13 +332,13 @@ addDevice () {
   local DISK_INDEX=$3
   local DISK_ADDRESS=$4
 
-  [ -z "${DISK_DEV}" ] && return 0
-  [ ! -b "${DISK_DEV}" ] && error "Device ${DISK_DEV} cannot be found! Please add it to the 'devices' section of your compose file." && exit 55
+  [ -z "$DISK_DEV" ] && return 0
+  [ ! -b "$DISK_DEV" ] && error "Device $DISK_DEV cannot be found! Please add it to the 'devices' section of your compose file." && exit 55
 
-  DISK_OPTS="${DISK_OPTS} \
-    -device virtio-scsi-pci,id=hw-${DISK_ID},bus=pcie.0,addr=${DISK_ADDRESS} \
-    -drive file=${DISK_DEV},if=none,id=drive-${DISK_ID},format=raw,cache=${DISK_CACHE},aio=${DISK_IO},discard=${DISK_DISCARD},detect-zeroes=on \
-    -device scsi-hd,bus=hw-${DISK_ID}.0,channel=0,scsi-id=0,lun=0,drive=drive-${DISK_ID},id=${DISK_ID},rotation_rate=${DISK_ROTATION},bootindex=${DISK_INDEX}"
+  DISK_OPTS="$DISK_OPTS \
+    -device virtio-scsi-pci,id=hw-$DISK_ID,bus=pcie.0,addr=$DISK_ADDRESS \
+    -drive file=$DISK_DEV,if=none,id=drive-$DISK_ID,format=raw,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on \
+    -device scsi-hd,bus=hw-$DISK_ID.0,channel=0,scsi-id=0,lun=0,drive=drive-$DISK_ID,id=$DISK_ID,rotation_rate=$DISK_ROTATION,bootindex=$DISK_INDEX"
 
   return 0
 }
@@ -212,11 +350,11 @@ addDevice () {
 : ${DEVICE5:=''}
 : ${DEVICE6:=''}
 
-addDevice "userdata7" "${DEVICE}" "6" "0xf"
-addDevice "userdata8" "${DEVICE2}" "7" "0x5"
-addDevice "userdata9" "${DEVICE3}" "8" "0x6"
-addDevice "userdata4" "${DEVICE4}" "9" "0x7"
-addDevice "userdata5" "${DEVICE5}" "10" "0x8"
-addDevice "userdata6" "${DEVICE6}" "11" "0x9"
+addDevice "userdata7" "$DEVICE" "6" "0xf" || exit $?
+addDevice "userdata8" "$DEVICE2" "7" "0x5" || exit $?
+addDevice "userdata9" "$DEVICE3" "8" "0x6" || exit $?
+addDevice "userdata4" "$DEVICE4" "9" "0x7" || exit $?
+addDevice "userdata5" "$DEVICE5" "10" "0x8" || exit $?
+addDevice "userdata6" "$DEVICE6" "11" "0x9" || exit $?
 
 return 0

src/entry.sh

@@ -17,17 +17,17 @@ cd /run
 
 trap - ERR
 
-if [[ "${CONSOLE}" == [Yy]* ]]; then
-  exec qemu-system-x86_64 -pidfile "${QEMU_PID}" ${ARGS:+ $ARGS}
+if [[ "$CONSOLE" == [Yy]* ]]; then
+  exec qemu-system-x86_64 -pidfile "$QEMU_PID" ${ARGS:+ $ARGS}
   exit $?
 fi
 
 set -m
 (
-  [[ "${DEBUG}" == [Yy1]* ]] && info "$VERS" && set -x
-  qemu-system-x86_64 ${ARGS:+ $ARGS} & echo $! > "${QEMU_PID}"
+  [[ "$DEBUG" == [Yy1]* ]] && info "$VERS" && set -x
+  qemu-system-x86_64 ${ARGS:+ $ARGS} & echo $! > "$QEMU_PID"
   { set +x; } 2>/dev/null
 )
 set +m
 
-tail --pid "$(cat "${QEMU_PID}")" --follow /dev/null & wait $!
+tail --pid "$(cat "$QEMU_PID")" --follow /dev/null & wait $!

src/gpu.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 set -Eeuo pipefail
 
-if [[ "${GPU}" != [Yy1]* ]] || [[ "$ARCH" != "amd64" ]]; then
+if [[ "$GPU" != [Yy1]* ]] || [[ "$ARCH" != "amd64" ]]; then
   return 0
 fi
 

src/install.sh

@@ -5,7 +5,7 @@ set -Eeuo pipefail
 : ${DEV:='Y'}   # Controls whether device nodes are created.
 
 if [ -f "$STORAGE"/dsm.ver ]; then
-  BASE=$(cat "${STORAGE}/dsm.ver")
+  BASE=$(cat "$STORAGE/dsm.ver")
 else
   # Fallback for old installs
   BASE="DSM_VirtualDSM_42962"
@@ -29,6 +29,7 @@ DL_GLOBAL="https://global.synologydownload.com/download/DSM"
 
 if [ -z "$DL" ]; then
   [ -z "$COUNTRY" ] && setCountry
+  [ -z "$COUNTRY" ] && info "Warning: could not detect country to select mirror!"
   [[ "${COUNTRY^^}" == "CN" ]] && DL="$DL_CHINA" || DL="$DL_GLOBAL"
 fi
 
@@ -40,16 +41,9 @@ if [ -z "$URL" ]; then
   fi
 fi
 
-# Check if output is to interactive TTY
-if [ -t 1 ]; then
-  PROGRESS="--progress=bar:noscroll"
-else
-  PROGRESS="--progress=dot:giga"
-fi
-
 BASE=$(basename "$URL" .pat)
 
-if [[ "$URL" != "file://${STORAGE}/${BASE}.pat" ]]; then
+if [[ "$URL" != "file://$STORAGE/$BASE.pat" ]]; then
   rm -f "$STORAGE"/"$BASE".pat
 fi
 
@@ -57,7 +51,7 @@ rm -f "$STORAGE"/"$BASE".agent
 rm -f "$STORAGE"/"$BASE".boot.img
 rm -f "$STORAGE"/"$BASE".system.img
 
-[[ "${DEBUG}" == [Yy1]* ]] && set -x
+[[ "$DEBUG" == [Yy1]* ]] && set -x
 
 # Check filesystem
 MIN_ROOT=471859200
@@ -65,7 +59,7 @@ MIN_SPACE=6442450944
 FS=$(stat -f -c %T "$STORAGE")
 
 if [[ "$FS" == "overlay"* ]]; then
-  info "Warning: the filesystem of ${STORAGE} is OverlayFS, this usually means it was binded to an invalid path!"
+  info "Warning: the filesystem of $STORAGE is OverlayFS, this usually means it was binded to an invalid path!"
 fi
 
 if [[ "$FS" != "fat"* && "$FS" != "vfat"* && "$FS" != "exfat"* && \
@@ -76,7 +70,7 @@ else
   SPACE=$(df --output=avail -B 1 /tmp | tail -n 1)
   if (( MIN_SPACE > SPACE )); then
     TMP="$STORAGE/tmp"
-    info "Warning: the ${FS} filesystem of ${STORAGE} does not support UNIX permissions.."
+    info "Warning: the $FS filesystem of $STORAGE does not support UNIX permissions.."
   fi
 fi
 
@@ -88,19 +82,26 @@ SPACE=$(df --output=avail -B 1 / | tail -n 1)
 
 SPACE=$(df --output=avail -B 1 "$TMP" | tail -n 1)
 SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-(( MIN_SPACE > SPACE )) && error "Not enough free space for installation in ${STORAGE}, have ${SPACE_GB} GB available but need at least 6 GB." && exit 95
+(( MIN_SPACE > SPACE )) && error "Not enough free space for installation in $STORAGE, have $SPACE_GB GB available but need at least 6 GB." && exit 95
 
 if [[ "$TMP" != "$STORAGE/tmp" ]]; then
   SPACE=$(df --output=avail -B 1 "$STORAGE" | tail -n 1)
   SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-  (( MIN_SPACE > SPACE )) && error "Not enough free space for installation in ${STORAGE}, have ${SPACE_GB} GB available but need at least 6 GB." && exit 94
+  (( MIN_SPACE > SPACE )) && error "Not enough free space for installation in $STORAGE, have $SPACE_GB GB available but need at least 6 GB." && exit 94
+fi
+
+# Check if output is to interactive TTY
+if [ -t 1 ]; then
+  PROGRESS="--progress=bar:noscroll"
+else
+  PROGRESS="--progress=dot:giga"
 fi
 
 # Download the required files from the Synology website
 
 RDC="$STORAGE/dsm.rd"
 
-if [ ! -f "${RDC}" ]; then
+if [ ! -f "$RDC" ]; then
 
   info "Install: Downloading installer..."
 
@@ -109,7 +110,7 @@ if [ ! -f "${RDC}" ]; then
   VERIFY="b4215a4b213ff5154db0488f92c87864"
   LOC="$DL/release/7.0.1/42218/DSM_VirtualDSM_42218.pat"
 
-  { curl -r "$POS" -sfk -o "$RD" "$LOC"; rc=$?; } || :
+  { curl -r "$POS" -sfk -S -o "$RD" "$LOC"; rc=$?; } || :
   (( rc != 0 )) && error "Failed to download $LOC, reason: $rc" && exit 60
 
   SUM=$(md5sum "$RD" | cut -f 1 -d " ")
@@ -123,7 +124,7 @@ if [ ! -f "${RDC}" ]; then
     { wget "$LOC" -O "$PAT" -q --no-check-certificate --show-progress "$PROGRESS"; rc=$?; } || :
     (( rc != 0 )) && error "Failed to download $LOC, reason: $rc" && exit 60
 
-    tar --extract --file="$PAT" --directory="$(dirname "${RD}")"/. "$(basename "${RD}")"
+    tar --extract --file="$PAT" --directory="$(dirname "$RD")"/. "$(basename "$RD")"
     rm "$PAT"
 
   fi
@@ -132,20 +133,21 @@ if [ ! -f "${RDC}" ]; then
 
 fi
 
-if [ -f "${RDC}" ]; then
+if [ -f "$RDC" ]; then
 
   { xz -dc <"$RDC" >"$TMP/rd" 2>/dev/null; rc=$?; } || :
   (( rc != 1 )) && error "Failed to unxz $RDC, reason $rc" && exit 91
 
-  if [[ "${DEV}" == [Nn]* ]]; then
+  if [[ "$DEV" == [Nn]* ]]; then
     # Exclude dev/ from cpio extract
     { (cd "$TMP" && cpio -it < "$TMP/rd" | grep -Ev 'dev/' | while read -r entry; do cpio -idm "$entry" < "$TMP/rd" 2>/dev/null; done); rc=$?; } || :
+    (( rc != 0 )) && error "Failed to extract $RDC, reason $rc" && exit 92
   else
     { (cd "$TMP" && cpio -idm <"$TMP/rd" 2>/dev/null); rc=$?; } || :
+    (( rc != 0 )) && error "Failed to extract $RDC, reason $rc"
+    (( rc != 0 )) && error "If the container runs unprivileged, please set DEV=N to exclude device nodes." && exit 92
   fi
 
-  (( rc != 0 )) && error "Failed to extract $RDC, reason $rc" && exit 92
-
   mkdir -p /run/extract
   for file in $TMP/usr/lib/libcurl.so.4 \
               $TMP/usr/lib/libmbedcrypto.so.5 \
@@ -240,26 +242,26 @@ SYSTEM_SIZE=4954537983
 # Check free diskspace
 SPACE=$(df --output=avail -B 1 "$TMP" | tail -n 1)
 SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-(( SYSTEM_SIZE > SPACE )) && error "Not enough free space to create a 4 GB system disk, have only ${SPACE_GB} GB available." && exit 87
+(( SYSTEM_SIZE > SPACE )) && error "Not enough free space to create a 4 GB system disk, have only $SPACE_GB GB available." && exit 87
 
-if ! fallocate -l "${SYSTEM_SIZE}" "${SYSTEM}"; then
-  if ! truncate -s "${SYSTEM_SIZE}" "${SYSTEM}"; then
-    rm -f "${SYSTEM}" && error "Could not allocate a file for the system disk." && exit 88
+if ! fallocate -l "$SYSTEM_SIZE" "$SYSTEM"; then
+  if ! truncate -s "$SYSTEM_SIZE" "$SYSTEM"; then
+    rm -f "$SYSTEM" && error "Could not allocate a file for the system disk." && exit 88
   fi
 fi
 
 # Check if file exists
-[ ! -f "${SYSTEM}" ] && error "System disk does not exist ($SYSTEM)" && exit 89
+[ ! -f "$SYSTEM" ] && error "System disk does not exist ($SYSTEM)" && exit 89
 
 # Check the filesize
-SIZE=$(stat -c%s "${SYSTEM}")
-[[ SIZE -ne SYSTEM_SIZE ]] && rm -f "${SYSTEM}" && error "System disk has the wrong size: ${SIZE}" && exit 90
+SIZE=$(stat -c%s "$SYSTEM")
+[[ SIZE -ne SYSTEM_SIZE ]] && rm -f "$SYSTEM" && error "System disk has the wrong size: $SIZE" && exit 90
 
 PART="$TMP/partition.fdisk"
 
 {       echo "label: dos"
         echo "label-id: 0x6f9ee2e9"
-        echo "device: ${SYSTEM}"
+        echo "device: $SYSTEM"
         echo "unit: sectors"
         echo "sector-size: 512"
         echo ""
@@ -276,7 +278,7 @@ rm -rf "$MOUNT" && mkdir -p "$MOUNT"
 
 mv "$HDA.tgz" "$HDA.txz"
 
-if [[ "${DEV}" == [Nn]* ]]; then
+if [[ "$DEV" == [Nn]* ]]; then
   # Exclude dev/ from tar extract
   tar xpfJ "$HDA.txz" --absolute-names --exclude="dev" -C "$MOUNT/"
 else
@@ -301,7 +303,7 @@ rm -rf "$MOUNT"
 
 echo "$BASE" > "$STORAGE"/dsm.ver
 
-if [[ "$URL" == "file://${STORAGE}/${BASE}.pat" ]]; then
+if [[ "$URL" == "file://$STORAGE/$BASE.pat" ]]; then
   rm -f "$PAT"
 else
   mv -f "$PAT" "$STORAGE"/"$BASE".pat
@@ -313,6 +315,6 @@ mv -f "$SYSTEM" "$STORAGE"/"$BASE".system.img
 rm -rf "$TMP"
 
 { set +x; } 2>/dev/null
-[[ "${DEBUG}" == [Yy1]* ]] && echo
+[[ "$DEBUG" == [Yy1]* ]] && echo
 
 return 0

src/network.sh

@@ -23,37 +23,38 @@ configureDHCP() {
 
   # Create a macvtap network for the VM guest
 
-  { ip link add link "${VM_NET_DEV}" name "${VM_NET_TAP}" address "${VM_NET_MAC}" type macvtap mode bridge ; rc=$?; } || :
+  { ip link add link "$VM_NET_DEV" name "$VM_NET_TAP" address "$VM_NET_MAC" type macvtap mode bridge ; rc=$?; } || :
 
   if (( rc != 0 )); then
     error "Cannot create macvtap interface. Please make sure the network type is 'macvlan' and not 'ipvlan',"
     error "and that the NET_ADMIN capability has been added to the container config: --cap-add NET_ADMIN" && exit 16
   fi
 
-  while ! ip link set "${VM_NET_TAP}" up; do
+  while ! ip link set "$VM_NET_TAP" up; do
     info "Waiting for address to become available..."
     sleep 2
   done
 
-  TAP_NR=$(</sys/class/net/"${VM_NET_TAP}"/ifindex)
+  local TAP_NR TAP_PATH MAJOR MINOR
+  TAP_NR=$(</sys/class/net/"$VM_NET_TAP"/ifindex)
   TAP_PATH="/dev/tap${TAP_NR}"
 
   # Create dev file (there is no udev in container: need to be done manually)
-  IFS=: read -r MAJOR MINOR < <(cat /sys/devices/virtual/net/"${VM_NET_TAP}"/tap*/dev)
-  (( MAJOR < 1)) && error "Cannot find: sys/devices/virtual/net/${VM_NET_TAP}" && exit 18
+  IFS=: read -r MAJOR MINOR < <(cat /sys/devices/virtual/net/"$VM_NET_TAP"/tap*/dev)
+  (( MAJOR < 1)) && error "Cannot find: sys/devices/virtual/net/$VM_NET_TAP" && exit 18
 
-  [[ ! -e "${TAP_PATH}" ]] && [[ -e "/dev0/${TAP_PATH##*/}" ]] && ln -s "/dev0/${TAP_PATH##*/}" "${TAP_PATH}"
+  [[ ! -e "$TAP_PATH" ]] && [[ -e "/dev0/${TAP_PATH##*/}" ]] && ln -s "/dev0/${TAP_PATH##*/}" "$TAP_PATH"
 
-  if [[ ! -e "${TAP_PATH}" ]]; then
-    { mknod "${TAP_PATH}" c "$MAJOR" "$MINOR" ; rc=$?; } || :
-    (( rc != 0 )) && error "Cannot mknod: ${TAP_PATH} ($rc)" && exit 20
+  if [[ ! -e "$TAP_PATH" ]]; then
+    { mknod "$TAP_PATH" c "$MAJOR" "$MINOR" ; rc=$?; } || :
+    (( rc != 0 )) && error "Cannot mknod: $TAP_PATH ($rc)" && exit 20
   fi
 
   { exec 30>>"$TAP_PATH"; rc=$?; } 2>/dev/null || :
 
   if (( rc != 0 )); then
     error "Cannot create TAP interface ($rc). Please add the following docker settings to your "
-    error "container: --device-cgroup-rule='c ${MAJOR}:* rwm' --device=/dev/vhost-net" && exit 21
+    error "container: --device-cgroup-rule='c $MAJOR:* rwm' --device=/dev/vhost-net" && exit 21
   fi
 
   { exec 40>>/dev/vhost-net; rc=$?; } 2>/dev/null || :
@@ -74,17 +75,17 @@ configureDNS () {
   DNSMASQ_OPTS="$DNSMASQ_OPTS --dhcp-range=$VM_NET_IP,$VM_NET_IP --dhcp-host=$VM_NET_MAC,,$VM_NET_IP,$VM_NET_HOST,infinite --dhcp-option=option:netmask,255.255.255.0"
 
   # Create lease file for faster resolve
-  echo "0 $VM_NET_MAC $VM_NET_IP $VM_NET_HOST 01:${VM_NET_MAC}" > /var/lib/misc/dnsmasq.leases
+  echo "0 $VM_NET_MAC $VM_NET_IP $VM_NET_HOST 01:$VM_NET_MAC" > /var/lib/misc/dnsmasq.leases
   chmod 644 /var/lib/misc/dnsmasq.leases
 
   # Set DNS server and gateway
   DNSMASQ_OPTS="$DNSMASQ_OPTS --dhcp-option=option:dns-server,${VM_NET_IP%.*}.1 --dhcp-option=option:router,${VM_NET_IP%.*}.1"
   DNSMASQ_OPTS=$(echo "$DNSMASQ_OPTS" | sed 's/\t/ /g' | tr -s ' ' | sed 's/^ *//')
 
-  [[ "${DEBUG}" == [Yy1]* ]] && set -x
+  [[ "$DEBUG" == [Yy1]* ]] && set -x
   $DNSMASQ ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS}
   { set +x; } 2>/dev/null
-  [[ "${DEBUG}" == [Yy1]* ]] && echo
+  [[ "$DEBUG" == [Yy1]* ]] && echo
 
   return 0
 }
@@ -94,7 +95,7 @@ configureNAT () {
   # Create a bridge with a static IP for the VM guest
 
   VM_NET_IP='20.20.20.21'
-  [[ "${DEBUG}" == [Yy1]* ]] && set -x
+  [[ "$DEBUG" == [Yy1]* ]] && set -x
 
   { ip link add dev dockerbridge type bridge ; rc=$?; } || :
 
@@ -111,19 +112,19 @@ configureNAT () {
   done
 
   # QEMU Works with taps, set tap to the bridge created
-  ip tuntap add dev "${VM_NET_TAP}" mode tap
+  ip tuntap add dev "$VM_NET_TAP" mode tap
 
-  while ! ip link set "${VM_NET_TAP}" up promisc on; do
+  while ! ip link set "$VM_NET_TAP" up promisc on; do
     info "Waiting for tap to become available..."
     sleep 2
   done
 
-  ip link set dev "${VM_NET_TAP}" master dockerbridge
+  ip link set dev "$VM_NET_TAP" master dockerbridge
 
   # Add internet connection to the VM
-  iptables -t nat -A POSTROUTING -o "${VM_NET_DEV}" -j MASQUERADE
-  iptables -t nat -A PREROUTING -i "${VM_NET_DEV}" -d "${IP}" -p tcp  -j DNAT --to $VM_NET_IP
-  iptables -t nat -A PREROUTING -i "${VM_NET_DEV}" -d "${IP}" -p udp  -j DNAT --to $VM_NET_IP
+  iptables -t nat -A POSTROUTING -o "$VM_NET_DEV" -j MASQUERADE
+  iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p tcp  -j DNAT --to "$VM_NET_IP"
+  iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p udp  -j DNAT --to "$VM_NET_IP"
 
   if (( KERNEL > 4 )); then
     # Hack for guest VMs complaining about "bad udp checksums in 5 packets"
@@ -131,7 +132,7 @@ configureNAT () {
   fi
 
   { set +x; } 2>/dev/null
-  [[ "${DEBUG}" == [Yy1]* ]] && echo
+  [[ "$DEBUG" == [Yy1]* ]] && echo
 
   # Check port forwarding flag
   if [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
@@ -141,7 +142,7 @@ configureNAT () {
     fi
   fi
 
-  NET_OPTS="-netdev tap,ifname=${VM_NET_TAP},script=no,downscript=no,id=hostnet0"
+  NET_OPTS="-netdev tap,ifname=$VM_NET_TAP,script=no,downscript=no,id=hostnet0"
 
   { exec 40>>/dev/vhost-net; rc=$?; } 2>/dev/null || :
   (( rc == 0 )) && NET_OPTS="$NET_OPTS,vhost=on,vhostfd=40"
@@ -153,15 +154,19 @@ configureNAT () {
 
 closeNetwork () {
 
-  if [[ "${DHCP}" == [Yy1]* ]]; then
+  if [[ "$DHCP" == [Yy1]* ]]; then
 
-    ip link set "${VM_NET_TAP}" down || true
-    ip link delete "${VM_NET_TAP}" || true
+    { pkill -f server.sh || true; } 2>/dev/null
+
+    ip link set "$VM_NET_TAP" down || true
+    ip link delete "$VM_NET_TAP" || true
 
   else
 
-    ip link set "${VM_NET_TAP}" down promisc off || true
-    ip link delete "${VM_NET_TAP}" || true
+    { pkill -f dnsmasq || true; } 2>/dev/null
+
+    ip link set "$VM_NET_TAP" down promisc off || true
+    ip link delete "$VM_NET_TAP" || true
 
     ip link set dockerbridge down || true
     ip link delete dockerbridge || true
@@ -195,16 +200,16 @@ update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy > /dev/null
 
 VM_NET_MAC="${VM_NET_MAC//-/:}"
 GATEWAY=$(ip r | grep default | awk '{print $3}')
-IP=$(ip address show dev "${VM_NET_DEV}" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/)
+IP=$(ip address show dev "$VM_NET_DEV" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/)
 
-if [[ "${DEBUG}" == [Yy1]* ]]; then
-  info "Container IP is ${IP} with gateway ${GATEWAY}" && echo
+if [[ "$DEBUG" == [Yy1]* ]]; then
+  info "Container IP is $IP with gateway $GATEWAY" && echo
 fi
 
-if [[ "${DHCP}" == [Yy1]* ]]; then
+if [[ "$DHCP" == [Yy1]* ]]; then
 
   if [[ "$GATEWAY" == "172."* ]]; then
-    if [[ "${DEBUG}" == [Yy1]* ]]; then
+    if [[ "$DEBUG" == [Yy1]* ]]; then
       info "Warning: Are you sure the container is on a macvlan network?"
     else
       error "You can only enable DHCP while the container is on a macvlan network!" && exit 86
@@ -224,6 +229,6 @@ else
 
 fi
 
-NET_OPTS="${NET_OPTS} -device virtio-net-pci,romfile=,netdev=hostnet0,mac=${VM_NET_MAC},id=net0"
+NET_OPTS="$NET_OPTS -device virtio-net-pci,romfile=,netdev=hostnet0,mac=$VM_NET_MAC,id=net0"
 
 return 0

src/power.sh

@@ -8,8 +8,8 @@ QEMU_TIMEOUT=50
 QEMU_PID=/run/qemu.pid
 QEMU_COUNT=/run/qemu.count
 
-rm -f "${QEMU_PID}"
-rm -f "${QEMU_COUNT}"
+rm -f "$QEMU_PID"
+rm -f "$QEMU_COUNT"
 
 _trap(){
     func="$1" ; shift
@@ -21,53 +21,64 @@ _trap(){
 _graceful_shutdown() {
 
   set +e
+  local cnt response
 
-  [ ! -f "${QEMU_PID}" ] && exit 130
-  [ -f "${QEMU_COUNT}" ] && return
+  [ ! -f "$QEMU_PID" ] && exit 130
+  [ -f "$QEMU_COUNT" ] && return
 
-  echo 0 > "${QEMU_COUNT}"
-  echo && info "Received $1 signal, shutting down..."
+  echo 0 > "$QEMU_COUNT"
+  echo && info "Received $1 signal, sending shutdown command..."
 
   # Don't send the powerdown signal because vDSM ignores ACPI signals
   # echo 'system_powerdown' | nc -q 1 -w 1 localhost "${QEMU_PORT}" > /dev/null
 
   # Send shutdown command to guest agent via serial port
-  RESPONSE=$(curl -s -m 30 -S http://127.0.0.1:2210/read?command=6 2>&1)
+  url="http://127.0.0.1:2210/read?command=6&timeout=50"
+  response=$(curl -sk -m 52 -S "$url" 2>&1)
 
-  if [[ ! "${RESPONSE}" =~ "\"success\"" ]]; then
+  if [[ "$response" =~ "\"success\"" ]]; then
 
-    echo && error "Failed to send shutdown command ( ${RESPONSE} )."
+    echo && info "Virtual DSM is now ready to shutdown..."
 
-    kill -15 "$(cat "${QEMU_PID}")"
+  else
+
+    response="${response#*message\"\: \"}"
+    echo && error "Failed to send shutdown command: ${response%%\"*}"
+
+    kill -15 "$(cat "$QEMU_PID")"
     pkill -f qemu-system-x86_64 || true
 
   fi
 
-  while [ "$(cat ${QEMU_COUNT})" -lt "${QEMU_TIMEOUT}" ]; do
+  while [ "$(cat $QEMU_COUNT)" -lt "$QEMU_TIMEOUT" ]; do
 
     # Increase the counter
-    echo $(($(cat ${QEMU_COUNT})+1)) > ${QEMU_COUNT}
+    echo $(($(cat $QEMU_COUNT)+1)) > "$QEMU_COUNT"
 
     # Try to connect to qemu
-    if echo 'info version'| nc -q 1 -w 1 localhost "${QEMU_PORT}" >/dev/null 2>&1 ; then
+    if echo 'info version'| nc -q 1 -w 1 localhost "$QEMU_PORT" >/dev/null 2>&1 ; then
 
       sleep 1
 
-      CNT="$(cat ${QEMU_COUNT})/${QEMU_TIMEOUT}"
-      [[ "${DEBUG}" == [Yy1]* ]] && info "Shutting down, waiting... (${CNT})"
+      cnt="$(cat $QEMU_COUNT)/$QEMU_TIMEOUT"
+      [[ "$DEBUG" == [Yy1]* ]] && info "Shutting down, waiting... ($cnt)"
 
     fi
 
   done
 
   echo && echo "❯ Quitting..."
-  echo 'quit' | nc -q 1 -w 1 localhost "${QEMU_PORT}" >/dev/null 2>&1 || true
+  echo 'quit' | nc -q 1 -w 1 localhost "$QEMU_PORT" >/dev/null 2>&1 || true
+
+  { pkill -f print.sh || true; } 2>/dev/null
+  { pkill -f host.bin || true; } 2>/dev/null
 
   closeNetwork
+  sleep 1
 
   return
 }
 
 _trap _graceful_shutdown SIGTERM SIGHUP SIGINT SIGABRT SIGQUIT
 
-MON_OPTS="-monitor telnet:localhost:${QEMU_PORT},server,nowait,nodelay"
+MON_OPTS="-monitor telnet:localhost:$QEMU_PORT,server,nowait,nodelay"

src/print.sh

@@ -1,66 +1,80 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
-info () { echo -e >&2 "\E[1;34m❯\E[1;36m $1\E[0m" ; }
-error () { echo -e >&2 "\E[1;31m❯ ERROR: $1\E[0m" ; }
+info () { printf "%b%s%b" "\E[1;34m❯ \E[1;36m" "$1" "\E[0m\n" >&2; }
+error () { printf "%b%s%b" "\E[1;31m❯ " "ERROR: $1" "\E[0m\n" >&2; }
 
 file="/run/dsm.url"
+shutdown="/run/qemu.count"
+url="http://127.0.0.1:2210/read?command=10"
+resp_err="Guest returned an invalid response:"
+jq_err="Failed to parse response from guest: jq error"
 
 while [ ! -f  "$file" ]
 do
 
+  # Check if not shutting down
+  [ -f "$shutdown" ] && exit 1
+
   sleep 3
-  [ -f "$file" ] && continue
+
+  [ -f "$shutdown" ] && exit 1
+
+  # Healthcheck may have intervened
+  [ -f "$file" ] && break
 
   # Retrieve IP from guest VM
+  { json=$(curl -m 20 -sk "$url"); rc=$?; } || :
 
-  set +e
-  RESPONSE=$(curl -s -m 30 -S http://127.0.0.1:2210/read?command=10 2>&1)
-  set -e
+  [ -f "$shutdown" ] && exit 1
+  (( rc != 0 )) && error "Failed to connect to guest: curl error $rc" && continue
 
-  if [[ ! "${RESPONSE}" =~ "\"success\"" ]] ; then
-    error "Failed to connect to guest: $RESPONSE" && continue
+  { result=$(echo "$json" | jq -r '.status'); rc=$?; } || :
+  (( rc != 0 )) && error "$jq_err $rc ( $json )" && continue
+  [[ "$result" == "null" ]] && error "$resp_err $json" && continue
+
+  if [[ "$result" != "success" ]] ; then
+    { msg=$(echo "$json" | jq -r '.message'); rc=$?; } || :
+    error "Guest replied $result: $msg" && continue
   fi
 
-  # Retrieve the HTTP port number
-  if [[ ! "${RESPONSE}" =~ "\"http_port\"" ]] ; then
-    error "Failed to parse response from guest: $RESPONSE" && continue
-  fi
+  { port=$(echo "$json" | jq -r '.data.data.dsm_setting.data.http_port'); rc=$?; } || :
+  (( rc != 0 )) && error "$jq_err $rc ( $json )" && continue
+  [[ "$port" == "null" ]] && error "$resp_err $json" && continue
+  [ -z "$port" ] && continue
 
-  rest=${RESPONSE#*http_port}
-  rest=${rest#*:}
-  rest=${rest%%,*}
-  PORT=${rest%%\"*}
+  { ip=$(echo "$json" | jq -r '.data.data.ip.data[] | select((.name=="eth0") and has("ip")).ip'); rc=$?; } || :
+  (( rc != 0 )) && error "$jq_err $rc ( $json )" && continue
+  [[ "$ip" == "null" ]] && error "$resp_err $json" && continue
+  [ -z "$ip" ] && continue
 
-  [ -z "${PORT}" ] && continue
-
-  # Retrieve the IP address
-  if [[ ! "${RESPONSE}" =~ "eth0" ]] ; then
-    error "Failed to parse response from guest: $RESPONSE" && continue
-  fi
-
-  rest=${RESPONSE#*eth0}
-  rest=${rest#*ip}
-  rest=${rest#*:}
-  rest=${rest#*\"}
-  IP=${rest%%\"*}
-
-  [ -z "${IP}" ] && continue
-
-  echo "${IP}:${PORT}" > $file
+  echo "$ip:$port" > $file
 
 done
 
-LOCATION=$(cat "$file")
+[ -f "$shutdown" ] && exit 1
+
+location=$(cat "$file")
+
+if [[ "$location" != "20.20"* ]]; then
+
+  msg="http://$location"
 
-if [[ "$LOCATION" == "20.20"* ]]; then
-  MSG="port ${LOCATION##*:}"
 else
-  MSG="http://${LOCATION}"
+
+  ip=$(ip address show dev eth0 | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/)
+  port="${location##*:}"
+
+  if [[ "$ip" == "172."* ]]; then
+    msg="port $port"
+  else
+    msg="http://$ip:$port"
+  fi
+
 fi
 
 echo "" >&2
-info "--------------------------------------------------------"
-info " You can now login to DSM at ${MSG}"
-info "--------------------------------------------------------"
+info "-----------------------------------------------------------"
+info " You can now login to DSM at $msg"
+info "-----------------------------------------------------------"
 echo "" >&2

src/reset.sh

@@ -1,9 +1,10 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
-info () { echo -e "\E[1;34m❯ \E[1;36m$1\E[0m" ; }
-error () { echo -e >&2 "\E[1;31m❯ ERROR: $1\E[0m" ; }
-trap 'error "Status $? while: ${BASH_COMMAND} (line $LINENO/$BASH_LINENO)"' ERR
+info () { printf "%b%s%b" "\E[1;34m❯ \E[1;36m" "$1" "\E[0m\n"; }
+error () { printf "%b%s%b" "\E[1;31m❯ " "ERROR: $1" "\E[0m\n" >&2; }
+
+trap 'error "Status $? while: $BASH_COMMAND (line $LINENO/$BASH_LINENO)"' ERR
 
 [ ! -f "/run/entry.sh" ] && error "Script must run inside Docker container!" && exit 11
 [ "$(id -u)" -ne "0" ] && error "Script must be executed with root privileges." && exit 12
@@ -30,7 +31,7 @@ VERS=$(qemu-system-x86_64 --version | head -n 1 | cut -d '(' -f 1)
 # Check folder
 
 STORAGE="/storage"
-[ ! -d "$STORAGE" ] && error "Storage folder (${STORAGE}) not found!" && exit 13
+[ ! -d "$STORAGE" ] && error "Storage folder ($STORAGE) not found!" && exit 13
 
 # Cleanup files
 
@@ -47,11 +48,9 @@ rm -rf "$STORAGE/tmp"
 
 getCountry () {
 
-  local rc
-  local json
-  local result
   local url=$1
   local query=$2
+  local rc json result
 
   { json=$(curl -m 5 -H "Accept: application/json" -sfk "$url"); rc=$?; } || :
   (( rc != 0 )) && return 0

src/serial.sh

@@ -25,15 +25,15 @@ else
 fi
 
 HOST_ARGS=()
-HOST_ARGS+=("-cpu=${CPU_CORES}")
-HOST_ARGS+=("-cpu_arch=${HOST_CPU}")
+HOST_ARGS+=("-cpu=$CPU_CORES")
+HOST_ARGS+=("-cpu_arch=$HOST_CPU")
 
-[ -n "$HOST_MAC" ] && HOST_ARGS+=("-mac=${HOST_MAC}")
-[ -n "$HOST_MODEL" ] && HOST_ARGS+=("-model=${HOST_MODEL}")
-[ -n "$HOST_SERIAL" ] && HOST_ARGS+=("-hostsn=${HOST_SERIAL}")
-[ -n "$GUEST_SERIAL" ] && HOST_ARGS+=("-guestsn=${GUEST_SERIAL}")
+[ -n "$HOST_MAC" ] && HOST_ARGS+=("-mac=$HOST_MAC")
+[ -n "$HOST_MODEL" ] && HOST_ARGS+=("-model=$HOST_MODEL")
+[ -n "$HOST_SERIAL" ] && HOST_ARGS+=("-hostsn=$HOST_SERIAL")
+[ -n "$GUEST_SERIAL" ] && HOST_ARGS+=("-guestsn=$GUEST_SERIAL")
 
-if [[ "${HOST_DEBUG}" == [Yy1]* ]]; then
+if [[ "$HOST_DEBUG" == [Yy1]* ]]; then
   set -x
   ./host.bin "${HOST_ARGS[@]}" &
   { set +x; } 2>/dev/null

src/server.sh

@@ -14,9 +14,9 @@ trap 'stop' EXIT SIGINT SIGTERM SIGHUP
 html()
 {
     local h="<!DOCTYPE html><HTML><HEAD><TITLE>VirtualDSM</TITLE>"
-    h="${h} <STYLE>body { color: white; background-color: #125bdb; font-family: Verdana,"
-    h="${h} Arial,sans-serif; } a, a:hover, a:active, a:visited { color: white; }</STYLE></HEAD>"
-    h="${h}<BODY><BR><BR><H1><CENTER>$1</CENTER></H1></BODY></HTML>"
+    h="$h<STYLE>body { color: white; background-color: #125bdb; font-family: Verdana,"
+    h="$h Arial,sans-serif; } a, a:hover, a:active, a:visited { color: white; }</STYLE></HEAD>"
+    h="$h<BODY><BR><BR><H1><CENTER>$1</CENTER></H1></BODY></HTML>"
 
     echo "$h"
 }
@@ -33,8 +33,8 @@ if [[ "$2" != "/"* ]]; then
   HTML=$(html "$BODY")
   printf '%b' "HTTP/1.1 200 OK\nContent-Length: ${#HTML}\nConnection: close\n\n$HTML" > "$TMP_FILE"
 
-  socat TCP4-LISTEN:80,reuseaddr,fork,crlf SYSTEM:"cat ${TMP_FILE}" 2> /dev/null &
-  socat TCP4-LISTEN:"${1:-5000}",reuseaddr,fork,crlf SYSTEM:"cat ${TMP_FILE}" 2> /dev/null & wait $!
+  socat TCP4-LISTEN:80,reuseaddr,fork,crlf SYSTEM:"cat $TMP_FILE" 2> /dev/null &
+  socat TCP4-LISTEN:"${1:-5000}",reuseaddr,fork,crlf SYSTEM:"cat $TMP_FILE" 2> /dev/null & wait $!
   
   exit
   
@@ -46,15 +46,15 @@ if [[ "$2" != "/run/ip.sh" ]]; then
 
 else
 
-  BODY="The location of DSM is <a href='http://\${LOCATION}'>http://\${LOCATION}</a><script>"
-  BODY="${BODY}setTimeout(function(){ window.location.assign('http://\${LOCATION}'); }, 3000);</script>"
+  BODY="The location of DSM is <a href='http://\$LOCATION'>http://\$LOCATION</a><script>"
+  BODY="$BODY setTimeout(function(){ window.location.assign('http://\$LOCATION'); }, 3000);</script>"
   WAIT="Please wait while discovering IP...<script>setTimeout(() => { document.location.reload(); }, 4999);</script>"
 
   HTML=$(html "xxx")
 
   { echo "#!/bin/bash"
     echo "[ -f \"/run/dsm.url\" ] && LOCATION=\$(cat \"/run/dsm.url\")"
-    echo "HTML=\"$HTML\"; [ -z \"\${LOCATION}\" ] && BODY=\"$WAIT\" || BODY=\"$BODY\"; HTML=\${HTML/xxx/\$BODY}"
+    echo "HTML=\"$HTML\"; [ -z \"\$LOCATION\" ] && BODY=\"$WAIT\" || BODY=\"$BODY\"; HTML=\${HTML/xxx/\$BODY}"
     echo "printf '%b' \"HTTP/1.1 200 OK\\nContent-Length: \${#HTML}\\nConnection: close\\n\\n\$HTML\""
   } > "$TMP_FILE"