fix: Verify files are not empty (#689)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

.dockerignore

@@ -6,7 +6,10 @@
 .gitmodules
 Dockerfile
 Dockerfile.archive
+compose.yml
+compose.yaml
 docker-compose.yml
+docker-compose.yaml
 
 *.md
 

.github/workflows/build.yml

@@ -8,6 +8,10 @@ on:
     paths-ignore:
       - '**/*.md'
       - '**/*.yml'
+      - '**/*.js'
+      - '**/*.css'
+      - '**/*.html'
+      - 'web/**'
       - '.gitignore'
       - '.dockerignore'
       - '.github/**'
@@ -99,3 +103,15 @@ jobs:
           url: ${{ secrets.GITLAB_URL }}
           token: ${{ secrets.GITLAB_TOKEN }}
           username: ${{ secrets.GITLAB_USERNAME }}
+      -
+        name: Send mail
+        uses: action-pack/send-mail@v1
+        with:
+          to: ${{secrets.MAILTO}}
+          from: Github Actions <${{secrets.MAILTO}}>
+          connection_url: ${{secrets.MAIL_CONNECTION}}
+          subject: Build of ${{ github.event.repository.name }} v${{ steps.meta.outputs.version }} completed
+          body: |
+              The build job of ${{ github.event.repository.name }} v${{ steps.meta.outputs.version }} was completed successfully! 
+              
+              See https://github.com/${{ github.repository }}/actions for more information.

.github/workflows/check.yml

@@ -7,8 +7,18 @@ jobs:
     name: shellcheck
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
-      - name: Run ShellCheck
+      - 
+        name: Checkout
+        uses: actions/checkout@v4
+      -
+        name: Run ShellCheck
         uses: ludeeus/action-shellcheck@master
-env:
-        SHELLCHECK_OPTS: -x --source-path=src -e SC2001 -e SC2034 -e SC2064 -e SC2317 -e SC2153 -e SC2028
+        env:
+          SHELLCHECK_OPTS: -x --source-path=src -e SC2001 -e SC2034 -e SC2064 -e SC2317 -e SC2153 -e SC2028
+      - 
+        name: Lint Dockerfile
+        uses: hadolint/hadolint-action@v3.1.0
+        with:
+          dockerfile: Dockerfile
+          ignore: DL3008,DL3003,DL3006
+          failure-threshold: warning

.github/workflows/hub.yml

@@ -15,7 +15,7 @@ jobs:
     - uses: actions/checkout@v4
     - 
       name: Docker Hub Description
-      uses: peter-evans/dockerhub-description@v3
+      uses: peter-evans/dockerhub-description@v4
       with:
         username: ${{ secrets.DOCKERHUB_USERNAME }}
         password: ${{ secrets.DOCKERHUB_TOKEN }}

.github/workflows/test.yml

@@ -3,6 +3,7 @@ on:
   pull_request:
     paths:
       - '**/*.sh'
+      - 'Dockerfile'
       - '.github/workflows/test.yml'
       - '.github/workflows/check.yml'
 

Dockerfile

@@ -1,4 +1,4 @@
-FROM qemux/qemu-host as builder
+FROM qemux/qemu-host:2.04 as builder
 
 #  FROM golang as builder
 #  WORKDIR /
@@ -14,9 +14,9 @@ ARG DEBCONF_NOWARNINGS "yes"
 ARG DEBIAN_FRONTEND "noninteractive"
 ARG DEBCONF_NONINTERACTIVE_SEEN "true"
 
-RUN if [ "$TARGETPLATFORM" != "linux/amd64" ]; then extra="qemu-user"; fi \
-    && apt-get update \
-    && apt-get --no-install-recommends -y install \
+RUN if [ "$TARGETPLATFORM" != "linux/amd64" ]; then extra="qemu-user"; fi && \
+    apt-get update && \
+    apt-get --no-install-recommends -y install \
         jq \
         tini \
         curl \
@@ -37,11 +37,11 @@ RUN if [ "$TARGETPLATFORM" != "linux/amd64" ]; then extra="qemu-user"; fi \
         ca-certificates \
         netcat-openbsd \
         qemu-system-x86 \
-        "$extra" \
-    && apt-get clean \
-    && unlink /etc/nginx/sites-enabled/default \
-    && sed -i 's/^worker_processes.*/worker_processes 1;/' /etc/nginx/nginx.conf \
-    && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
+        "$extra" && \
+    apt-get clean && \
+    unlink /etc/nginx/sites-enabled/default && \
+    sed -i 's/^worker_processes.*/worker_processes 1;/' /etc/nginx/nginx.conf && \
+    rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
 
 COPY ./src /run/
 COPY ./web /var/www/

compose.yml

@@ -5,12 +5,8 @@ services:
         image: vdsm/virtual-dsm:latest
         environment:
             DISK_SIZE: "16G"
-            RAM_SIZE: "1G"
-            CPU_CORES: "1"
         devices:
             - /dev/kvm
-        device_cgroup_rules:
-            - 'c *:* rwm'
         cap_add:
             - NET_ADMIN
         ports:

readme.md

@@ -1,6 +1,6 @@
 <h1 align="center">Virtual DSM<br />
 <div align="center">
-<img src="https://github.com/vdsm/virtual-dsm/raw/master/.github/screen.jpg" title="Screenshot" style="max-width:100%;" width="432" />
+<a href="https://github.com/vdsm/virtual-dsm"><img src="https://github.com/vdsm/virtual-dsm/raw/master/.github/screen.jpg" title="Screenshot" style="max-width:100%;" width="432" /></a>
 </div>
 <div align="center">
 
@@ -11,18 +11,17 @@
 
 </div></h1>
 
-Virtual DSM in a docker container.
+Virtual DSM in a Docker container.
 
 ## Features
 
  - Multiple disks
  - KVM acceleration
- - GPU pass-through
  - Upgrades supported
  
 ## Usage
 
-Via `docker-compose.yml`
+Via Docker Compose:
 
 ```yaml
 version: "3"
@@ -44,198 +43,201 @@ services:
     stop_grace_period: 2m
 ```
 
-Via `docker run`
+Via Docker CLI:
 
 ```bash
-docker run -it --rm -p 5000:5000 --device=/dev/kvm --cap-add NET_ADMIN --stop-timeout 120 vdsm/virtual-dsm
+docker run -it --rm --name dsm -p 5000:5000 --device=/dev/kvm --cap-add NET_ADMIN --stop-timeout 120 vdsm/virtual-dsm
 ```
 
 ## FAQ
 
-  * ### How do I use it?
+* ### How do I use it?
 
-    Very simple! These are the steps:
-    
-    - Start the container and get some coffee.
+  Very simple! These are the steps:
+  
+  - Start the container and connect to [port 5000](http://localhost:5000) using your web browser.
 
-    - Connect to [port 5000](http://localhost:5000) of the container in your web browser.
+  - Wait until DSM is ready, choose an username and password, and you will be taken to the desktop.
+  
+  Enjoy your brand new machine, and don't forget to star this repo!
 
-    - Wait until DSM is ready, choose an username and password, and you will be taken to the desktop.
+* ### How do I change the size of the disk?
 
-    - Enjoy your brand new machine, and don't forget to star this repo!
+  To expand the default size of 16 GB, locate the `DISK_SIZE` setting in your compose file and modify it to your preferred capacity:
 
-  * ### How do I change the size of the disk?
+  ```yaml
+  environment:
+    DISK_SIZE: "128G"
+  ```
+  
+  This can also be used to resize the existing disk to a larger capacity without any data loss. 
 
-    To expand the default size of 16 GB, locate the `DISK_SIZE` setting in your compose file and modify it to your preferred capacity:
+* ### How do I change the storage location?
 
-    ```yaml
-    environment:
-      DISK_SIZE: "128G"
-    ```
-    
-    This can also be used to resize the existing disk to a larger capacity without any data loss. 
+  To change the storage location, include the following bind mount in your compose file:
 
-  * ### How do I change the storage location?
+  ```yaml
+  volumes:
+    - /var/dsm:/storage
+  ```
 
-    To change the storage location, include the following bind mount in your compose file:
+  Replace the example path `/var/dsm` with the desired storage folder.
 
-    ```yaml
-    volumes:
-      - /var/dsm:/storage
-    ```
+* ### How do I create a growable disk?
 
-    Replace the example path `/var/dsm` with the desired storage folder.
+  By default, the entire capacity of the disk is reserved in advance.
 
-  * ### How do I create a growable disk?
+  To create a growable disk that only allocates space that is actually used, add the following environment variable:
 
-    By default, the entire capacity of the disk is reserved in advance.
+  ```yaml
+  environment:
+    DISK_FMT: "qcow2"
+  ```
 
-    To create a growable disk that only allocates space that is actually used, add the following environment variable:
+  Please note that this may reduce the write performance of the disk.
 
-    ```yaml
-    environment:
-      DISK_FMT: "qcow2"
-    ```
+* ### How do I add multiple disks?
 
-    Please note that this may reduce the write performance of the disk.
+  To create additional disks, modify your compose file like this:
+  
+  ```yaml
+  environment:
+    DISK2_SIZE: "32G"
+    DISK3_SIZE: "64G"
+  volumes:
+    - /home/example:/storage2
+    - /mnt/data/example:/storage3
+  ```
 
-  * ### How do I add multiple disks?
+* ### How do I pass-through a disk?
 
-    To create additional disks, modify your compose file like this:
-    
-    ```yaml
-    environment:
-      DISK2_SIZE: "32G"
-      DISK3_SIZE: "64G"
-    volumes:
-      - /home/example:/storage2
-      - /mnt/data/example:/storage3
-    ```
+   It is possible to pass-through disk devices directly by adding them to your compose file in this way:
 
-  * ### How do I pass-through a disk?
+  ```yaml
+  environment:
+    DEVICE2: "/dev/sda"
+    DEVICE3: "/dev/sdb"
+  devices:
+    - /dev/sda
+    - /dev/sdb
+  ```
 
-     It is possible to pass-through disk devices directly by adding them to your compose file in this way:
+  Please note that the device needs to be totally empty (without any partition table) otherwise DSM does not always format it into a volume.
 
-    ```yaml
-    environment:
-      DEVICE2: "/dev/sda"
-      DEVICE3: "/dev/sdb"
-    devices:
-      - /dev/sda
-      - /dev/sdb
-    ```
+  Do NOT use this feature with the goal of sharing files from the host, they will all be lost without warning when DSM creates the volume.
 
-    Please note that the device needs to be totally empty (without any partition table) otherwise DSM does not always format it into a volume.
+* ### How do I increase the amount of CPU or RAM?
 
-    Do NOT use this feature with the goal of sharing files from the host, they will all be lost without warning when DSM creates the volume.
+  By default, a single CPU core and 1 GB of RAM are allocated to the container.
 
-  * ### How do I increase the amount of CPU or RAM?
+  To increase this, add the following environment variables:
 
-    By default, a single CPU core and 1 GB of RAM are allocated to the container.
+  ```yaml
+  environment:
+    RAM_SIZE: "4G"
+    CPU_CORES: "4"
+  ```
 
-    To increase this, add the following environment variables:
+* ### How do I verify if my system supports KVM?
 
-    ```yaml
-    environment:
-      RAM_SIZE: "4G"
-      CPU_CORES: "4"
-    ```
+  To verify if your system supports KVM, run the following commands:
 
-  * ### How do I verify if my system supports KVM?
+  ```bash
+  sudo apt install cpu-checker
+  sudo kvm-ok
+  ```
 
-    To verify if your system supports KVM, run the following commands:
+  If you receive an error from `kvm-ok` indicating that KVM acceleration can't be used, check the virtualization settings in the BIOS.
 
-    ```bash
-    sudo apt install cpu-checker
-    sudo kvm-ok
-    ```
+* ### How do I assign an individual IP address to the container?
 
-    If you receive an error from `kvm-ok` indicating that KVM acceleration can't be used, check the virtualization settings in the BIOS.
+  By default, the container uses bridge networking, which shares the IP address with the host. 
 
-  * ### How do I assign an individual IP address to the container?
+  If you want to assign an individual IP address to the container, you can create a macvlan network as follows:
 
-    By default, the container uses bridge networking, which shares the IP address with the host. 
+  ```bash
+  docker network create -d macvlan \
+      --subnet=192.168.0.0/24 \
+      --gateway=192.168.0.1 \
+      --ip-range=192.168.0.100/28 \
+      -o parent=eth0 vdsm
+  ```
+  
+  Be sure to modify these values to match your local subnet. 
 
-    If you want to assign an individual IP address to the container, you can create a macvlan network as follows:
+  Once you have created the network, change your compose file to look as follows:
 
-    ```bash
-    docker network create -d macvlan \
-        --subnet=192.168.0.0/24 \
-        --gateway=192.168.0.1 \
-        --ip-range=192.168.0.100/28 \
-        -o parent=eth0 vdsm
-    ```
-    
-    Be sure to modify these values to match your local subnet. 
+  ```yaml
+  services:
+    dsm:
+      container_name: dsm
+      ..<snip>..
+      networks:
+        vdsm:
+          ipv4_address: 192.168.0.100
 
-    Once you have created the network, change your compose file to look as follows:
+  networks:
+    vdsm:
+      external: true
+  ```
+ 
+  An added benefit of this approach is that you won't have to perform any port mapping anymore, since all ports will be exposed by default.
 
-    ```yaml
-    services:
-      dsm:
-        container_name: dsm
-        ..<snip>..
-        networks:
-          vdsm:
-            ipv4_address: 192.168.0.100
+  Please note that this IP address won't be accessible from the Docker host due to the design of macvlan, which doesn't permit communication between the two. If this is a concern, you need to create a [second macvlan](https://blog.oddbit.com/post/2018-03-12-using-docker-macvlan-networks/#host-access) as a workaround.
 
-    networks:
-      vdsm:
-        external: true
-    ```
-   
-    An added benefit of this approach is that you won't have to perform any port mapping anymore, since all ports will be exposed by default.
+* ### How can DSM acquire an IP address from my router?
 
-    Please note that this IP address won't be accessible from the Docker host due to the design of macvlan, which doesn't permit communication between the two. If this is a concern, you need to create a [second macvlan](https://blog.oddbit.com/post/2018-03-12-using-docker-macvlan-networks/#host-access) as a workaround.
+  After configuring the container for macvlan (see above), it is possible for DSM to become part of your home network by requesting an IP from your router, just like your other devices.
 
-  * ### How can DSM acquire an IP address from my router?
+  To enable this mode, add the following lines to your compose file:
 
-    After configuring the container for macvlan (see above), it is possible for DSM to become part of your home network by requesting an IP from your router, just like your other devices.
+  ```yaml
+  environment:
+    DHCP: "Y"
+  devices:
+    - /dev/vhost-net
+  device_cgroup_rules:
+    - 'c *:* rwm'
+  ```
 
-    To enable this feature, add the following lines to your compose file:
+  Please note that even if you don't need DHCP, it's still recommended to enable this mode, as it prevents NAT issues and increases performance by using a `macvtap` interface. You can just set a static IP from the DSM control panel afterwards.
 
-    ```yaml
-    environment:
-      DHCP: "Y"
-    device_cgroup_rules:
-      - 'c *:* rwm'
-    ```
+* ### How do I pass-through the GPU?
 
-    Please note that even if you don't want DHCP, it's still recommended to enable this feature, as it prevents NAT issues and increases performance by using a `macvtap` interface. In that case, just set a static IP from the DSM control panel after you enabled this mode.
+  To pass-through your Intel GPU, add the following lines to your compose file:
 
-  * ### How do I pass-through the GPU?
+  ```yaml
+  environment:
+    GPU: "Y"
+  devices:
+    - /dev/dri
+  ```
 
-    To pass-through your Intel GPU, add the following lines to your compose file:
+  This can be used to enable the facial recognition function in Synology Photos for example.
 
-    ```yaml
-    environment:
-      GPU: "Y"
-    devices:
-      - /dev/dri
-    ```
+* ### How do I install a specific version of vDSM?
 
-    This can be used to enable the facial recognition function in Synology Photos for example.
+  By default, version 7.2 will be installed, but if you prefer an older version, you can add its download URL to your compose file as follows:
 
-  * ### How do I install a specific version of vDSM?
+  ```yaml
+  environment:
+    URL: "https://global.synologydownload.com/download/DSM/release/7.0.1/42218/DSM_VirtualDSM_42218.pat"
+  ```
 
-    By default, version 7.2 will be installed, but if you prefer an older version, you can add its download URL to your compose file as follows:
+  With this method, it is even possible to switch between different versions while keeping all your file data intact.
 
-    ```yaml
-    environment:
-      URL: "https://global.synologydownload.com/download/DSM/release/7.0.1/42218/DSM_VirtualDSM_42218.pat"
-    ```
+* ### What are the differences compared to the standard DSM?
 
-    With this method, it is even possible to switch between different versions while keeping all your file data intact.
+  There are only two minor differences: the Virtual Machine Manager package is not available, and Surveillance Station will not include any free licenses.
+  
+* ### Is this project legal?
 
-  * ### What are the differences compared to the standard DSM?
+  Yes, this project contains only open-source code and does not distribute any copyrighted material. Neither does it try to circumvent any copyright protection measures. So under all applicable laws, this project would be considered legal. 
+  
+  However, by installing Synology's Virtual DSM, you must accept their end-user license agreement, which does not permit installation on non-Synology hardware. So only run this container on an official Synology NAS, as any other use will be a violation of their terms and conditions.
 
-    There are only two minor differences: the Virtual Machine Manager package is not available, and Surveillance Station will not include any free licenses.
-    
-  * ### Is this project legal?
-
-    Yes, this project contains only open-source code and does not distribute any copyrighted material. Neither does it try to circumvent any copyright protection measures. So under all applicable laws, this project would be considered legal. 
-    
-    However, by installing Synology's Virtual DSM, you must accept their end-user license agreement, which does not permit installation on non-Synology hardware. So only run this project on an official Synology NAS, as any other use will be a violation of their terms and conditions.
+## Stars
+[![Stars](https://starchart.cc/vdsm/virtual-dsm.svg?variant=adaptive)](https://starchart.cc/vdsm/virtual-dsm)
 
 ## Disclaimer
 

src/check.sh

@@ -1,13 +1,16 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
+: "${NETWORK:="Y"}"
+
 [ -f "/run/shm/qemu.end" ] && echo "QEMU is shutting down.." && exit 1
-[ ! -f "/run/shm/qemu.pid" ] && echo "QEMU is not running yet.." && exit 0
+[ ! -s "/run/shm/qemu.pid" ] && echo "QEMU is not running yet.." && exit 0
+[[ "$NETWORK" != [Yy1]* ]] && echo "Networking is disabled.." && exit 0
 
 file="/run/shm/dsm.url"
 address="/run/shm/qemu.ip"
 
-[ ! -f  "$file" ] && echo "DSM has not enabled networking yet.." && exit 1
+[ ! -s  "$file" ] && echo "DSM has not enabled networking yet.." && exit 1
 
 location=$(<"$file")
 

src/disk.sh

@@ -13,8 +13,8 @@ set -Eeuo pipefail
 BOOT="$STORAGE/$BASE.boot.img"
 SYSTEM="$STORAGE/$BASE.system.img"
 
-[ ! -f "$BOOT" ] && error "Virtual DSM boot-image does not exist ($BOOT)" && exit 81
-[ ! -f "$SYSTEM" ] && error "Virtual DSM system-image does not exist ($SYSTEM)" && exit 82
+[ ! -s "$BOOT" ] && error "Virtual DSM boot-image does not exist ($BOOT)" && exit 81
+[ ! -s "$SYSTEM" ] && error "Virtual DSM system-image does not exist ($SYSTEM)" && exit 82
 
 DISK_OPTS="\
     -object iothread,id=io2 \
@@ -80,7 +80,7 @@ getSize() {
 isCow() {
   local FS=$1
 
-  if [[ "${FS,,}" == "xfs" || "${FS,,}" == "zfs" || "${FS,,}" == "btrfs" || "${FS,,}" == "bcachefs" ]]; then
+  if [[ "${FS,,}" == "btrfs" ]]; then
     return 0
   fi
 
@@ -113,7 +113,7 @@ createDisk() {
   fi
 
   html "Creating a $DISK_DESC image..."
-  info "Creating a $DISK_TYPE $DISK_DESC image in $DISK_FMT format with a size of $DISK_SPACE..."
+  info "Creating a $DISK_SPACE $DISK_TYPE $DISK_DESC image in $DISK_FMT format..."
 
   local FAIL="Could not create a $DISK_TYPE $DISK_FMT $DISK_DESC image of $DISK_SPACE ($DISK_FILE)"
 
@@ -341,6 +341,21 @@ checkFS () {
   return 0
 }
 
+createDevice () {
+
+  local DISK_ID=$1
+  local DISK_FILE=$2
+  local DISK_INDEX=$3
+  local DISK_ADDRESS=$4
+  local DISK_FMT=$5
+
+  echo "-drive file=$DISK_FILE,if=none,id=drive-$DISK_ID,format=$DISK_FMT,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on \
+    -device virtio-scsi-pci,id=hw-$DISK_ID,iothread=io2,bus=pcie.0,addr=$DISK_ADDRESS \
+    -device scsi-hd,bus=hw-$DISK_ID.0,channel=0,scsi-id=0,lun=0,drive=drive-$DISK_ID,id=$DISK_ID,rotation_rate=$DISK_ROTATION,bootindex=$DISK_INDEX"
+
+  return 0
+}
+
 addDisk () {
   local DISK_ID=$1
   local DISK_BASE=$2
@@ -351,7 +366,7 @@ addDisk () {
   local DISK_ADDRESS=$7
   local DISK_FMT=$8
   local DISK_FILE="$DISK_BASE.$DISK_EXT"
-  local DIR DATA_SIZE FS PREV_FMT PREV_EXT CUR_SIZE
+  local DIR DATA_SIZE FS PREV_FMT PREV_EXT CUR_SIZE OPTS
 
   DIR=$(dirname "$DISK_FILE")
   [ ! -d "$DIR" ] && return 0
@@ -371,7 +386,7 @@ addDisk () {
   FS=$(stat -f -c %T "$DIR")
   checkFS "$FS" "$DISK_FILE" "$DISK_DESC" || exit $?
 
-  if ! [ -f "$DISK_FILE" ] ; then
+  if ! [ -s "$DISK_FILE" ] ; then
 
     if [[ "${DISK_FMT,,}" != "raw" ]]; then
       PREV_FMT="raw"
@@ -380,12 +395,12 @@ addDisk () {
     fi
     PREV_EXT=$(fmt2ext "$PREV_FMT")
 
-    if [ -f "$DISK_BASE.$PREV_EXT" ] ; then
+    if [ -s "$DISK_BASE.$PREV_EXT" ] ; then
       convertDisk "$DISK_BASE.$PREV_EXT" "$PREV_FMT" "$DISK_FILE" "$DISK_FMT" "$DISK_BASE" "$DISK_DESC" "$FS" || exit $?
     fi
   fi
 
-  if [ -f "$DISK_FILE" ]; then
+  if [ -s "$DISK_FILE" ]; then
 
     CUR_SIZE=$(getSize "$DISK_FILE")
 
@@ -399,10 +414,8 @@ addDisk () {
 
   fi
 
-  DISK_OPTS="$DISK_OPTS \
-    -device virtio-scsi-pci,id=hw-$DISK_ID,iothread=io2,bus=pcie.0,addr=$DISK_ADDRESS \
-    -drive file=$DISK_FILE,if=none,id=drive-$DISK_ID,format=$DISK_FMT,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on \
-    -device scsi-hd,bus=hw-$DISK_ID.0,channel=0,scsi-id=0,lun=0,drive=drive-$DISK_ID,id=$DISK_ID,rotation_rate=$DISK_ROTATION,bootindex=$DISK_INDEX"
+  OPTS=$(createDevice "$DISK_ID" "$DISK_FILE" "$DISK_INDEX" "$DISK_ADDRESS" "$DISK_FMT")
+  DISK_OPTS="$DISK_OPTS $OPTS"
 
   return 0
 }
@@ -418,10 +431,9 @@ addDevice () {
   [ -z "$DISK_DEV" ] && return 0
   [ ! -b "$DISK_DEV" ] && error "Device $DISK_DEV cannot be found! Please add it to the 'devices' section of your compose file." && exit 55
 
-  DISK_OPTS="$DISK_OPTS \
-    -device virtio-scsi-pci,id=hw-$DISK_ID,iothread=io2,bus=pcie.0,addr=$DISK_ADDRESS \
-    -drive file=$DISK_DEV,if=none,id=drive-$DISK_ID,format=raw,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on \
-    -device scsi-hd,bus=hw-$DISK_ID.0,channel=0,scsi-id=0,lun=0,drive=drive-$DISK_ID,id=$DISK_ID,rotation_rate=$DISK_ROTATION,bootindex=$DISK_INDEX"
+  local OPTS
+  OPTS=$(createDevice "$DISK_ID" "$DISK_DEV" "$DISK_INDEX" "$DISK_ADDRESS" "raw")
+  DISK_OPTS="$DISK_OPTS $OPTS"
 
   return 0
 }

src/display.sh

@@ -15,7 +15,8 @@ if [[ "$GPU" != [Yy1]* ]] || [[ "$ARCH" != "amd64" ]]; then
 
 fi
 
-DISPLAY_OPTS="-display egl-headless,rendernode=/dev/dri/renderD128 -vga $VGA"
+DISPLAY_OPTS="-display egl-headless,rendernode=/dev/dri/renderD128"
+DISPLAY_OPTS="$DISPLAY_OPTS -vga $VGA"
 
 [ ! -d /dev/dri ] && mkdir -m 755 /dev/dri
 

src/entry.sh

@@ -32,4 +32,5 @@ terminal
 tail -fn +0 "$QEMU_LOG" 2>/dev/null &
 cat "$QEMU_TERM" 2>/dev/null & wait $! || :
 
-sleep 1 && finish 0
+sleep 1 & wait $!
+finish 0

src/install.sh

@@ -5,6 +5,7 @@ set -Eeuo pipefail
 
 if [ -f "$STORAGE/dsm.ver" ]; then
   BASE=$(<"$STORAGE/dsm.ver")
+  [ -z "$BASE" ] && BASE="DSM_VirtualDSM_69057"
 else
   # Fallback for old installs
   BASE="DSM_VirtualDSM_42962"
@@ -12,14 +13,14 @@ fi
 
 if [ -n "$URL" ]; then
   BASE=$(basename "$URL" .pat)
-  if [ ! -f "$STORAGE/$BASE.system.img" ]; then
+  if [ ! -s "$STORAGE/$BASE.system.img" ]; then
     BASE=$(basename "${URL%%\?*}" .pat)
     : "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
     BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
   fi
 fi
 
-if [[ -f "$STORAGE/$BASE.boot.img" ]] && [[ -f "$STORAGE/$BASE.system.img" ]]; then
+if [[ -s "$STORAGE/$BASE.boot.img" ]] && [[ -s "$STORAGE/$BASE.system.img" ]]; then
   return 0  # Previous installation found
 fi
 
@@ -65,7 +66,11 @@ if [[ "${FS,,}" == "fuse"* ]]; then
   info "Warning: the filesystem of $STORAGE is FUSE, this extra layer will negatively affect performance!"
 fi
 
-if [[ "${FS,,}" != "fat"* && "${FS,,}" != "vfat"* && "${FS,,}" != "exfat"* && "${FS,,}" != "ntfs"* && "${FS,,}" != "msdos"* ]]; then
+if [[ "${FS,,}" == "fat"* || "${FS,,}" == "vfat"* || "${FS,,}" == "msdos"* ]]; then
+  error "Unable to install on $FS filesystems, please use a different filesystem for /storage." && exit 61
+fi
+
+if [[ "${FS,,}" != "exfat"* && "${FS,,}" != "ntfs"* && "${FS,,}" != "unknown"* ]]; then
   TMP="$STORAGE/tmp"
 else
   TMP="/tmp/dsm"
@@ -102,9 +107,10 @@ fi
 ROOT="Y"
 RDC="$STORAGE/dsm.rd"
 
-if [ ! -f "$RDC" ]; then
+if [ ! -s "$RDC" ]; then
 
   MSG="Downloading installer..."
+  PRG="Downloading installer ([P])..."
   info "Install: $MSG" && html "$MSG"
 
   RD="$TMP/rd.gz"
@@ -112,19 +118,32 @@ if [ ! -f "$RDC" ]; then
   VERIFY="b4215a4b213ff5154db0488f92c87864"
   LOC="$DL/release/7.0.1/42218/DSM_VirtualDSM_42218.pat"
 
+  rm -f "$RD"
+  rm -f "$RDC"
+  /run/progress.sh "$RD" "$PRG" &
   { curl -r "$POS" -sfk -S -o "$RD" "$LOC"; rc=$?; } || :
-  (( rc != 0 )) && error "Failed to download $LOC, reason: $rc" && exit 60
 
-  SUM=$(md5sum "$RD" | cut -f 1 -d " ")
+  fKill "progress.sh"
+
+  if (( rc != 0 )); then
+    (( rc != 22 )) && error "Failed to download $LOC, reason: $rc" && exit 60
+    SUM="skip"
+  else
+    SUM=$(md5sum "$RD" | cut -f 1 -d " ")
+  fi
 
   if [ "$SUM" != "$VERIFY" ]; then
 
     PAT="/install.pat"
-    rm "$RD"
+    rm -f "$RD"
     rm -f "$PAT"
 
+    html "$MSG"
+    /run/progress.sh "$PAT" "$PRG" &
     { wget "$LOC" -O "$PAT" -q --no-check-certificate --show-progress "$PROGRESS"; rc=$?; } || :
-    (( rc != 0 )) && error "Failed to download $LOC, reason: $rc" && exit 60
+
+    fKill "progress.sh"
+    (( rc != 0 )) && error "Failed to download $LOC , reason: $rc" && exit 60
 
     tar --extract --file="$PAT" --directory="$(dirname "$RD")"/. "$(basename "$RD")"
     rm "$PAT"
@@ -138,14 +157,14 @@ fi
 if [ -f "$RDC" ]; then
 
   { xz -dc <"$RDC" >"$TMP/rd" 2>/dev/null; rc=$?; } || :
-  (( rc != 1 )) && error "Failed to unxz $RDC, reason $rc" && exit 91
+  (( rc != 1 )) && error "Failed to unxz $RDC on $FS, reason $rc" && exit 91
 
   { (cd "$TMP" && cpio -idm <"$TMP/rd" 2>/dev/null); rc=$?; } || :
 
   if (( rc != 0 )); then
     ROOT="N"
     { (cd "$TMP" && fakeroot cpio -idmu <"$TMP/rd" 2>/dev/null); rc=$?; } || :
-    (( rc != 0 )) && error "Failed to extract $RDC, reason $rc" && exit 92
+    (( rc != 0 )) && error "Failed to extract $RDC on $FS, reason $rc" && exit 92
   fi
 
   rm -rf /run/extract && mkdir -p /run/extract
@@ -175,7 +194,10 @@ fi
 rm -rf "$TMP" && mkdir -p "$TMP"
 
 info "Install: Downloading $BASE.pat..."
-html "Install: Downloading DSM from Synology..."
+
+MSG="Downloading DSM..."
+PRG="Downloading DSM ([P])..."
+html "$MSG"
 
 PAT="/$BASE.pat"
 rm -f "$PAT"
@@ -186,12 +208,16 @@ if [[ "$URL" == "file://"* ]]; then
 
 else
 
+  /run/progress.sh "$PAT" "$PRG" &
+
   { wget "$URL" -O "$PAT" -q --no-check-certificate --show-progress "$PROGRESS"; rc=$?; } || :
-  (( rc != 0 )) && error "Failed to download $URL, reason: $rc" && exit 69
+
+  fKill "progress.sh"
+  (( rc != 0 )) && error "Failed to download $URL , reason: $rc" && exit 69
 
 fi
 
-[ ! -f "$PAT" ] && error "Failed to download $URL" && exit 69
+[ ! -s "$PAT" ] && error "Failed to download $URL" && exit 69
 
 SIZE=$(stat -c%s "$PAT")
 
@@ -228,7 +254,7 @@ MSG="Preparing system partition..."
 info "Install: $MSG" && html "$MSG"
 
 BOOT=$(find "$TMP" -name "*.bin.zip")
-[ ! -f "$BOOT" ] && error "The PAT file contains no boot image." && exit 67
+[ ! -s "$BOOT" ] && error "The PAT file contains no boot image." && exit 67
 
 BOOT=$(echo "$BOOT" | head -c -5)
 unzip -q -o "$BOOT".zip -d "$TMP"
@@ -249,11 +275,11 @@ if ! touch "$SYSTEM"; then
   error "Could not create file $SYSTEM for the system disk." && exit 98
 fi
 
-if [[ "${FS,,}" == "xfs" || "${FS,,}" == "zfs" || "${FS,,}" == "btrfs" || "${FS,,}" == "bcachefs" ]]; then
+if [[ "${FS,,}" == "btrfs" ]]; then
   { chattr +C "$SYSTEM"; } || :
   FA=$(lsattr "$SYSTEM")
   if [[ "$FA" != *"C"* ]]; then
-    error "Failed to disable COW for system image $SYSTEM on ${FS^^} filesystem (returned $FA)"
+    error "Failed to disable COW for system image $SYSTEM on ${FS^^} filesystem."
   fi
 fi
 
@@ -289,15 +315,15 @@ IDB="$TMP/indexdb"
 PKG="$TMP/packages"
 HDP="$TMP/synohdpack_img"
 
-[ ! -f "$HDA.tgz" ] && error "The PAT file contains no OS image." && exit 64
+[ ! -s "$HDA.tgz" ] && error "The PAT file contains no OS image." && exit 64
 mv "$HDA.tgz" "$HDA.txz"
 
 [ -d "$PKG" ] && mv "$PKG/" "$MOUNT/.SynoUpgradePackages/"
 rm -f "$MOUNT/.SynoUpgradePackages/ActiveInsight-"*
 
-[ -f "$HDP.txz" ] && tar xpfJ "$HDP.txz" --absolute-names -C "$MOUNT/"
+[ -s "$HDP.txz" ] && tar xpfJ "$HDP.txz" --absolute-names -C "$MOUNT/"
 
-if [ -f "$IDB.txz" ]; then
+if [ -s "$IDB.txz" ]; then
   INDEX_DB="$MOUNT/usr/syno/synoman/indexdb/"
   mkdir -p "$INDEX_DB"
   tar xpfJ "$IDB.txz" --absolute-names -C "$INDEX_DB"

src/network.sh

@@ -3,8 +3,9 @@ set -Eeuo pipefail
 
 # Docker environment variables
 
+: "${MAC:=""}"
 : "${DHCP:="N"}"
-: "${MAC:="02:11:32:AA:BB:CC"}"
+: "${NETWORK:="Y"}"
 
 : "${VM_NET_DEV:=""}"
 : "${VM_NET_TAP:="dsm"}"
@@ -23,8 +24,14 @@ ADD_ERR="Please add the following setting to your container:"
 
 configureDHCP() {
 
-  # Create a macvtap network for the VM guest
+  # Create the necessary file structure for /dev/vhost-net
+  if [ ! -c /dev/vhost-net ]; then
+    if mknod /dev/vhost-net c 10 238; then
+      chmod 660 /dev/vhost-net
+    fi
+  fi
 
+  # Create a macvtap network for the VM guest
   { ip link add link "$VM_NET_DEV" name "$VM_NET_TAP" address "$VM_NET_MAC" type macvtap mode bridge ; rc=$?; } || :
 
   if (( rc != 0 )); then
@@ -33,7 +40,7 @@ configureDHCP() {
   fi
 
   while ! ip link set "$VM_NET_TAP" up; do
-    info "Waiting for address to become available..."
+    info "Waiting for MAC address $VM_NET_MAC to become available..."
     sleep 2
   done
 
@@ -80,10 +87,16 @@ configureDNS() {
 
   # Set DNS server and gateway
   DNSMASQ_OPTS="$DNSMASQ_OPTS --dhcp-option=option:dns-server,${VM_NET_IP%.*}.1 --dhcp-option=option:router,${VM_NET_IP%.*}.1"
-  DNSMASQ_OPTS=$(echo "$DNSMASQ_OPTS" | sed 's/\t/ /g' | tr -s ' ' | sed 's/^ *//')
 
+  # Add DNS entry for container
+  DNSMASQ_OPTS="$DNSMASQ_OPTS --address=/host.lan/${VM_NET_IP%.*}.1"
+
+  DNSMASQ_OPTS=$(echo "$DNSMASQ_OPTS" | sed 's/\t/ /g' | tr -s ' ' | sed 's/^ *//')
   [[ "$DEBUG" == [Yy1]* ]] && set -x
-  $DNSMASQ ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS}
+
+  if ! $DNSMASQ ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS}; then
+    error "Failed to start dnsmasq, reason: $?" && exit 29
+  fi
   { set +x; } 2>/dev/null
   [[ "$DEBUG" == [Yy1]* ]] && echo
 
@@ -101,7 +114,7 @@ configureNAT() {
   fi
 
   if [ ! -c /dev/net/tun ]; then
-    error "TUN device missing. $ADD_ERR --cap-add NET_ADMIN" && exit 25
+    error "TUN device missing. $ADD_ERR --device /dev/net/tun --cap-add NET_ADMIN" && exit 25
   fi
 
   # Check port forwarding flag
@@ -115,7 +128,6 @@ configureNAT() {
   # Create a bridge with a static IP for the VM guest
 
   VM_NET_IP='20.20.20.21'
-  [[ "$DEBUG" == [Yy1]* ]] && set -x
 
   { ip link add dev dockerbridge type bridge ; rc=$?; } || :
 
@@ -126,7 +138,7 @@ configureNAT() {
   ip address add ${VM_NET_IP%.*}.1/24 broadcast ${VM_NET_IP%.*}.255 dev dockerbridge
 
   while ! ip link set dockerbridge up; do
-    info "Waiting for address to become available..."
+    info "Waiting for IP address to become available..."
     sleep 2
   done
 
@@ -134,7 +146,7 @@ configureNAT() {
   ip tuntap add dev "$VM_NET_TAP" mode tap
 
   while ! ip link set "$VM_NET_TAP" up promisc on; do
-    info "Waiting for tap to become available..."
+    info "Waiting for TAP to become available..."
     sleep 2
   done
 
@@ -153,13 +165,12 @@ configureNAT() {
     iptables -A POSTROUTING -t mangle -p udp --dport bootpc -j CHECKSUM --checksum-fill || true
   fi
 
-  { set +x; } 2>/dev/null
-  [[ "$DEBUG" == [Yy1]* ]] && echo
-
   NET_OPTS="-netdev tap,ifname=$VM_NET_TAP,script=no,downscript=no,id=hostnet0"
 
-  { exec 40>>/dev/vhost-net; rc=$?; } 2>/dev/null || :
-  (( rc == 0 )) && NET_OPTS="$NET_OPTS,vhost=on,vhostfd=40"
+  if [ -c /dev/vhost-net ]; then
+    { exec 40>>/dev/vhost-net; rc=$?; } 2>/dev/null || :
+    (( rc == 0 )) && NET_OPTS="$NET_OPTS,vhost=on,vhostfd=40"
+  fi
 
   configureDNS
 
@@ -168,22 +179,28 @@ configureNAT() {
 
 closeNetwork() {
 
-  exec 30<&- || true
-  exec 40<&- || true
-
   if [[ "$DHCP" == [Yy1]* ]]; then
 
     # Shutdown nginx
     nginx -s stop 2> /dev/null
     fWait "nginx"
 
+  fi
+
+  [[ "$NETWORK" != [Yy1]* ]] && return 0
+
+  exec 30<&- || true
+  exec 40<&- || true
+
+  if [[ "$DHCP" == [Yy1]* ]]; then
+
     ip link set "$VM_NET_TAP" down || true
     ip link delete "$VM_NET_TAP" || true
 
   else
 
     local pid="/var/run/dnsmasq.pid"
-    [ -f "$pid" ] && pKill "$(<"$pid")"
+    [ -s "$pid" ] && pKill "$(<"$pid")"
 
     ip link set "$VM_NET_TAP" down promisc off || true
     ip link delete "$VM_NET_TAP" || true
@@ -209,14 +226,26 @@ getInfo() {
     error "$ADD_ERR -e \"VM_NET_DEV=NAME\" to specify another interface name." && exit 27
   fi
 
+  if [ -z "$VM_NET_MAC" ]; then
+    local file="$STORAGE/dsm.mac"
+    [ -s "$file" ] && VM_NET_MAC=$(<"$file")
+    if [ -z "$VM_NET_MAC" ]; then
+      # Generate MAC address based on Docker container ID in hostname
+      VM_NET_MAC=$(echo "$HOST" | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:11:32:\3:\4:\5/')
+      echo "${VM_NET_MAC^^}" > "$file"
+    fi
+  fi
+
+  VM_NET_MAC="${VM_NET_MAC^^}"
   VM_NET_MAC="${VM_NET_MAC//-/:}"
+
   if [[ ${#VM_NET_MAC} == 12 ]]; then
     m="$VM_NET_MAC"
     VM_NET_MAC="${m:0:2}:${m:2:2}:${m:4:2}:${m:6:2}:${m:8:2}:${m:10:2}"
   fi
 
   if [[ ${#VM_NET_MAC} != 17 ]]; then
-    error "Invalid mac address: '$VM_NET_MAC', should be 12 or 17 digits long!" && exit 28
+    error "Invalid MAC address: '$VM_NET_MAC', should be 12 or 17 digits long!" && exit 28
   fi
 
   GATEWAY=$(ip r | grep default | awk '{print $3}')
@@ -230,25 +259,24 @@ getInfo() {
 #  Configure Network
 # ######################################
 
-if [ ! -c /dev/vhost-net ]; then
-  if mknod /dev/vhost-net c 10 238; then
-    chmod 660 /dev/vhost-net
-  fi
+if [[ "$NETWORK" != [Yy1]* ]]; then
+  NET_OPTS=""
+  return 0
 fi
 
 getInfo
 html "Initializing network..."
 
 if [[ "$DEBUG" == [Yy1]* ]]; then
-  info "Container IP is $IP with gateway $GATEWAY on interface $VM_NET_DEV" && echo
+  info "Host: $HOST  IP: $IP  Gateway: $GATEWAY  Interface: $VM_NET_DEV  MAC: $VM_NET_MAC"
+  [ -f /etc/resolv.conf ] && grep '^nameserver*' /etc/resolv.conf
+  echo
 fi
 
 if [[ "$DHCP" == [Yy1]* ]]; then
 
-  if [[ "$GATEWAY" == "172."* ]]; then
-    if [[ "$DEBUG" != [Yy1]* ]]; then
-      error "You can only enable DHCP while the container is on a macvlan network!" && exit 26
-    fi
+  if [[ "$GATEWAY" == "172."* ]] && [[ "$DEBUG" != [Yy1]* ]]; then
+    error "You can only enable DHCP while the container is on a macvlan network!" && exit 26
   fi
 
   # Configuration for DHCP IP

src/power.sh

@@ -34,7 +34,9 @@ finish() {
   local pid
   local reason=$1
 
-  if [ -f "$QEMU_PID" ]; then
+  touch "$QEMU_END"
+
+  if [ -s "$QEMU_PID" ]; then
 
     pid=$(<"$QEMU_PID")
     echo && error "Forcefully terminating QEMU process, reason: $reason..."
@@ -43,7 +45,7 @@ finish() {
     while isAlive "$pid"; do
       sleep 1
       # Workaround for zombie pid
-      [ ! -f "$QEMU_PID" ] && break
+      [ ! -s "$QEMU_PID" ] && break
     done
   fi
 
@@ -62,7 +64,7 @@ terminal() {
 
   local dev=""
 
-  if [ -f "$QEMU_OUT" ]; then
+  if [ -s "$QEMU_OUT" ]; then
 
     local msg
     msg=$(<"$QEMU_OUT")
@@ -111,7 +113,7 @@ _graceful_shutdown() {
   touch "$QEMU_END"
   echo && info "Received $1 signal, sending shutdown command..."
 
-  if [ ! -f "$QEMU_PID" ]; then
+  if [ ! -s "$QEMU_PID" ]; then
     echo && error "QEMU PID file does not exist?"
     finish "$code" && return "$code"
   fi
@@ -155,7 +157,7 @@ _graceful_shutdown() {
     [[ "$DEBUG" == [Yy1]* ]] && info "Shutting down, waiting... ($cnt/$QEMU_TIMEOUT)"
 
     # Workaround for zombie pid
-    [ ! -f "$QEMU_PID" ] && break
+    [ ! -s "$QEMU_PID" ] && break
 
   done
 
@@ -168,6 +170,7 @@ _graceful_shutdown() {
 
 MON_OPTS="\
         -pidfile $QEMU_PID \
+        -name $PROCESS,process=$PROCESS,debug-threads=on \
         -monitor telnet:localhost:$QEMU_PORT,server,nowait,nodelay"
 
 if [[ "$CONSOLE" != [Yy]* ]]; then

src/print.sh

@@ -2,6 +2,9 @@
 set -Eeuo pipefail
 
 : "${DHCP:="N"}"
+: "${NETWORK:="Y"}"
+
+[[ "$NETWORK" != [Yy1]* ]] && exit 0
 
 info () { printf "%b%s%b" "\E[1;34m❯ \E[1;36m" "$1" "\E[0m\n" >&2; }
 error () { printf "%b%s%b" "\E[1;31m❯ " "ERROR: $1" "\E[0m\n" >&2; }
@@ -18,7 +21,7 @@ resp_err="Guest returned an invalid response:"
 curl_err="Failed to connect to guest: curl error"
 jq_err="Failed to parse response from guest: jq error"
 
-while [ ! -f  "$file" ]
+while [ ! -s  "$file" ]
 do
 
   # Check if not shutting down
@@ -27,7 +30,7 @@ do
   sleep 3
 
   [ -f "$shutdown" ] && exit 1
-  [ -f "$file" ] && break
+  [ -s "$file" ] && break
 
   # Retrieve network info from guest VM
   { json=$(curl -m 20 -sk "$url"); rc=$?; } || :
@@ -101,3 +104,5 @@ info "-----------------------------------------------------------"
 info " You can now login to DSM at $msg"
 info "-----------------------------------------------------------"
 echo "" >&2
+
+exit 0

src/proc.sh

@@ -6,7 +6,8 @@ set -Eeuo pipefail
 : "${KVM:="Y"}"
 : "${HOST_CPU:=""}"
 : "${CPU_FLAGS:=""}"
-: "${CPU_MODEL:="host"}"
+: "${CPU_MODEL:=""}"
+: "${DEF_MODEL:="qemu64"}"
 
 [ "$ARCH" != "amd64" ] && KVM="N"
 
@@ -28,7 +29,7 @@ if [[ "$KVM" != [Nn]* ]]; then
 
   if [ -n "$KVM_ERR" ]; then
     KVM="N"
-    error "KVM acceleration not detected $KVM_ERR, this will cause a major loss of performance."
+    error "KVM acceleration not available $KVM_ERR, this will cause a major loss of performance."
     error "See the FAQ on how to enable it, or continue without KVM by setting KVM=N (not recommended)."
     [[ "$DEBUG" != [Yy1]* ]] && exit 88
   fi
@@ -37,35 +38,54 @@ fi
 
 if [[ "$KVM" != [Nn]* ]]; then
 
-  CPU_FEATURES="kvm=on"
-  KVM_OPTS=",accel=kvm -enable-kvm"
+  CPU_FEATURES="kvm=on,l3-cache=on"
+  KVM_OPTS=",accel=kvm -enable-kvm -global kvm-pit.lost_tick_policy=discard"
 
   if ! grep -qE '^flags.* (sse4_2)' /proc/cpuinfo; then
-    error "Your host CPU does not have the SSE4.2 instruction set that Virtual DSM requires to boot."
-    error "Disable KVM by setting KVM=N to emulate a compatible CPU, at the cost of performance."
-    [[ "$DEBUG" != [Yy1]* ]] && exit 89
+    info "Your CPU does not have the SSE4 instruction set that Virtual DSM requires, it will be emulated..."
+    [ -z "$CPU_MODEL" ] && CPU_MODEL="$DEF_MODEL"
+    CPU_FEATURES="$CPU_FEATURES,+ssse3,+sse4.1,+sse4.2"
+  fi
+
+  if [ -z "$CPU_MODEL" ]; then
+    CPU_MODEL="host"
+    CPU_FEATURES="$CPU_FEATURES,migratable=no"
   fi
 
 else
 
   KVM_OPTS=""
-  CPU_FEATURES="+ssse3,+sse4.1,+sse4.2"
+  CPU_FEATURES="l3-cache=on"
 
-  if [[ "${CPU_MODEL,,}" == "host"* ]]; then
+  if [[ "$ARCH" == "amd64" ]]; then
+    KVM_OPTS=" -accel tcg,thread=multi"
+  fi
 
+  if [ -z "$CPU_MODEL" ]; then
     if [[ "$ARCH" == "amd64" ]]; then
       CPU_MODEL="max"
+      CPU_FEATURES="$CPU_FEATURES,migratable=no"
     else
-      CPU_MODEL="qemu64"
+      CPU_MODEL="$DEF_MODEL"
     fi
-
   fi
+
+  CPU_FEATURES="$CPU_FEATURES,+ssse3,+sse4.1,+sse4.2"
+
 fi
 
 if [ -z "$CPU_FLAGS" ]; then
-  CPU_FLAGS="$CPU_MODEL,$CPU_FEATURES"
+  if [ -z "$CPU_FEATURES" ]; then
+    CPU_FLAGS="$CPU_MODEL"
+  else
+    CPU_FLAGS="$CPU_MODEL,$CPU_FEATURES"
+  fi
 else
-  CPU_FLAGS="$CPU_MODEL,$CPU_FEATURES,$CPU_FLAGS"
+  if [ -z "$CPU_FEATURES" ]; then
+    CPU_FLAGS="$CPU_MODEL,$CPU_FLAGS"
+  else
+    CPU_FLAGS="$CPU_MODEL,$CPU_FEATURES,$CPU_FLAGS"
+  fi
 fi
 
 if [ -z "$HOST_CPU" ]; then

src/progress.sh

@@ -0,0 +1,32 @@
+#!/usr/bin/env bash
+set -Eeuo pipefail
+
+escape () {
+    local s
+    s=${1//&/\&}
+    s=${s//</\&lt;}
+    s=${s//>/\&gt;}
+    s=${s//'"'/\&quot;}
+    printf -- %s "$s"
+    return 0
+}
+
+file="$1"
+body=$(escape "$2")
+info="/run/shm/msg.html"
+
+if [[ "$body" == *"..." ]]; then
+  body="<p class=\"loading\">${body/.../}</p>"
+fi
+
+while true
+do
+  if [ -s "$file" ]; then
+    bytes=$(du -sb "$file" | cut -f1)
+    if (( bytes > 1000 )); then
+      size=$(echo "$bytes" | numfmt --to=iec --suffix=B  | sed -r 's/([A-Z])/ \1/')
+      echo "${body//(\[P\])/($size)}"> "$info"
+    fi
+  fi
+  sleep 1 & wait $!
+done

src/reset.sh

@@ -28,6 +28,9 @@ echo
 
 # Helper variables
 
+PROCESS="${APP,,}"
+PROCESS="${PROCESS// /-}"
+
 STORAGE="/storage"
 INFO="/run/shm/msg.html"
 PAGE="/run/shm/index.html"
@@ -35,6 +38,7 @@ TEMPLATE="/var/www/index.html"
 FOOTER1="$APP for Docker v$(</run/version)"
 FOOTER2="<a href='$SUPPORT'>$SUPPORT</a>"
 
+HOST=$(hostname -s)
 KERNEL=$(uname -r | cut -b 1)
 MINOR=$(uname -r | cut -d '.' -f2)
 ARCH=$(dpkg --print-architecture)

src/serial.sh

@@ -9,6 +9,21 @@ set -Eeuo pipefail
 : "${HOST_MODEL:=""}"
 : "${GUEST_SERIAL:=""}"
 
+if [ -n "$HOST_MAC" ]; then
+
+  HOST_MAC="${HOST_MAC//-/:}"
+
+  if [[ ${#HOST_MAC} == 12 ]]; then
+    m="$HOST_MAC"
+    HOST_MAC="${m:0:2}:${m:2:2}:${m:4:2}:${m:6:2}:${m:8:2}:${m:10:2}"
+  fi
+
+  if [[ ${#HOST_MAC} != 17 ]]; then
+    error "Invalid HOST_MAC address: '$HOST_MAC', should be 12 or 17 digits long!" && exit 28
+  fi
+
+fi
+
 HOST_ARGS=()
 HOST_ARGS+=("-cpu=$CPU_CORES")
 HOST_ARGS+=("-cpu_arch=$HOST_CPU")

web/css/style.css

@@ -1,7 +1,14 @@
 body {
 	color: white;
 	background-color: #125bdb;
-	font-family: Verdana, Arial, sans-serif;
+	font-smoothing: antialiased;
+	-webkit-font-smoothing: antialiased;
+	-moz-osx-font-smoothing: grayscale;
+	font-family: Verdana, Geneva, sans-serif;
+}
+
+#info {
+	text-shadow: 1px 1px 1px rgba(0, 0, 0, 0.25);
 }
 
 #content {
@@ -17,6 +24,7 @@ footer {
 	height: 40px;
 	text-align: center;
 	color: #0c8aeb;
+	text-shadow: 0 0 1px #0c8aeb;
 }
 
 #empty {
@@ -33,8 +41,13 @@ a:visited {
 
 footer a:link,
 footer a:visited,
-footer a:active { color: #0c8aeb; }
-footer a:hover { color: #73e6ff; }
+footer a:active {
+	color: #0c8aeb;
+}
+
+footer a:hover {
+	color: #73e6ff;
+}
 
 .loading:after {
 	content: " .";

web/nginx.conf

@@ -1,8 +1,6 @@
 server {
     listen 80;
-    listen [::]:80;
     listen 5000 default_server;
-    listen [::]:5000 default_server;
 
     autoindex on;
     tcp_nodelay on;