feat: Improve CPU detection (#884)

.github/workflows/build.yml

@@ -54,7 +54,7 @@ jobs:
           labels: |
             org.opencontainers.image.title=${{ vars.NAME }}
         env:
-          DOCKER_METADATA_ANNOTATIONS_LEVELS: manifest,index            
+          DOCKER_METADATA_ANNOTATIONS_LEVELS: manifest,index
       - 
         name: Set up Docker Buildx
         uses: docker/setup-buildx-action@v3

compose.yml

@@ -6,6 +6,7 @@ services:
             DISK_SIZE: "16G"
         devices:
             - /dev/kvm
+            - /dev/net/tun
         cap_add:
             - NET_ADMIN
         ports:

kubernetes.yml

@@ -1,10 +1,11 @@
+---
 apiVersion: v1
 kind: PersistentVolumeClaim
 metadata:
   name: dsm-pvc
 spec:
   accessModes:
-    - ReadWriteOnce
+  - ReadWriteOnce
   resources:
     requests:
       storage: 16Gi
@@ -16,44 +17,51 @@ metadata:
   labels:
     name: dsm
 spec:
-  terminationGracePeriodSeconds: 120 # the Kubernetes default is 30 seconds and it may be not enough
   containers:
-    - name: dsm
-      image: vdsm/virtual-dsm
-      ports:
-        - containerPort: 5000
-          protocol: TCP
-      securityContext:
-        privileged: true
-      env:
-        - name: RAM_SIZE
-          value: 1G
-        - name: CPU_CORES
-          value: "1"
-        - name: DISK_SIZE
-          value: "16G"  # Kubernetes uses Gi, but DSM uses GB
-      volumeMounts:
-        - mountPath: /storage
-          name: storage
-        - mountPath: /dev/kvm
-          name: dev-kvm
+  - name: dsm
+    image: vdsm/virtual-dsm
+    env:
+    - name: RAM_SIZE
+      value: "1G"
+    - name: CPU_CORES
+      value: "1"
+    - name: DISK_SIZE
+      value: "16G"
+    ports:
+    - containerPort: 5000
+    securityContext:
+      capabilities:
+        add:
+        - NET_ADMIN
+      privileged: true
+    volumeMounts:
+    - mountPath: /storage
+      name: storage
+    - mountPath: /dev/kvm
+      name: dev-kvm
+    - mountPath: /dev/net/tun
+      name: dev-tun
+  terminationGracePeriodSeconds: 120
   volumes:
-    - name: storage
-      persistentVolumeClaim:
-        claimName: dsm-pvc
-    - name: dev-kvm
-      hostPath:
-        path: /dev/kvm
+  - name: storage
+    persistentVolumeClaim:
+      claimName: dsm-pvc
+  - hostPath:
+      path: /dev/kvm
+    name: dev-kvm
+  - hostPath:
+      path: /dev/net/tun
+      type: CharDevice
+    name: dev-tun
 ---
 apiVersion: v1
 kind: Service
 metadata:
   name: dsm
 spec:
-  type: NodePort
+  ports:
+  - name: tcp-5000
+    port: 5000
   selector:
     name: dsm
-  ports:
-    - name: tcp-5000
-      port: 5000
-      targetPort: 5000
+  type: NodePort

readme.md

@@ -33,6 +33,7 @@ services:
       DISK_SIZE: "16G"
     devices:
       - /dev/kvm
+      - /dev/net/tun
     cap_add:
       - NET_ADMIN
     ports:
@@ -45,15 +46,25 @@ services:
 Via Docker CLI:
 
 ```bash
-docker run -it --rm -p 5000:5000 --device=/dev/kvm --cap-add NET_ADMIN --stop-timeout 120 vdsm/virtual-dsm
+docker run -it --rm -p 5000:5000 --device=/dev/kvm --device=/dev/net/tun --cap-add NET_ADMIN --stop-timeout 120 vdsm/virtual-dsm
 ```
 
 Via Kubernetes:
 
 ```shell
-kubectl apply -f kubernetes.yml
+kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/master/kubernetes.yml
 ```
 
+## Compatibility ⚙️
+
+| **Product**  | **Platform**   | |
+|---|---|---|
+| Docker Engine | Linux| ✅ |
+| Docker Desktop | Linux | ❌ |
+| Docker Desktop | macOS | ❌ |
+| Docker Desktop | Windows 11 | ✅ |
+| Docker Desktop | Windows 10 | ❌ |
+
 ## FAQ 💬
 
 ### How do I use it?
@@ -64,7 +75,7 @@ kubectl apply -f kubernetes.yml
 
   - Wait until DSM is ready, choose an username and password, and you will be taken to the desktop.
   
-  Enjoy your brand new machine, and don't forget to star this repo!
+  Enjoy your brand new NAS, and don't forget to star this repo!
 
 ### How do I change the storage location?
 
@@ -147,24 +158,28 @@ kubectl apply -f kubernetes.yml
 
 ### How do I verify if my system supports KVM?
 
-  To verify that your system supports KVM, run the following commands:
+  Only Linux and Windows 11 support KVM virtualization, macOS and Windows 10 do not unfortunately.
+  
+  You can run the following commands in Linux to check your system:
 
   ```bash
   sudo apt install cpu-checker
   sudo kvm-ok
   ```
 
-  If you receive an error from `kvm-ok` indicating that KVM acceleration can't be used, please check whether:
+  If you receive an error from `kvm-ok` indicating that KVM cannot be used, please check whether:
 
   - the virtualization extensions (`Intel VT-x` or `AMD SVM`) are enabled in your BIOS.
 
-  - you are running an operating system that supports them, like Linux or Windows 11 (macOS and Windows 10 do not unfortunately).
-
   - you enabled "nested virtualization" if you are running the container inside a virtual machine.
 
   - you are not using a cloud provider, as most of them do not allow nested virtualization for their VPS's.
 
-  If you didn't receive any error from `kvm-ok` at all, but the container still complains that `/dev/kvm` is missing, it might help to add `privileged: true` to your compose file (or `--privileged` to your `run` command), to rule out any permission issue.
+  If you do not receive any error from `kvm-ok` but the container still complains about KVM, please check whether:
+
+  - you are not using "Docker Desktop for Linux" as it does not support KVM, instead make use of Docker Engine directly.
+ 
+  - it could help to add `privileged: true` to your compose file (or `sudo` to your `docker run` command), to rule out any permission issue.
 
 ### How do I assign an individual IP address to the container?
 

src/disk.sh

@@ -3,9 +3,9 @@ set -Eeuo pipefail
 
 # Docker environment variables
 
-: "${DISK_IO:="native"}"          # I/O Mode, can be set to 'native', 'threads' or 'io_turing'
+: "${DISK_IO:="native"}"          # I/O Mode, can be set to 'native', 'threads' or 'io_uring'
 : "${DISK_FMT:="raw"}"            # Disk file format, 'raw' by default for best performance
-: "${DISK_TYPE:=""}"              # Device type to be used, choose "ide", "usb", "blk" or "scsi"
+: "${DISK_TYPE:=""}"              # Device type to be used, "sata", "nvme", "blk" or "scsi"
 : "${DISK_FLAGS:=""}"             # Specifies the options for use with the qcow2 disk format
 : "${DISK_CACHE:="none"}"         # Caching mode, can be set to 'writeback' for better performance
 : "${DISK_DISCARD:="on"}"         # Controls whether unmap (TRIM) commands are passed to the host.
@@ -369,6 +369,7 @@ createDevice () {
   local result=" -drive file=$DISK_FILE,id=$DISK_ID,format=$DISK_FMT,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on"
 
   case "${DISK_TYPE,,}" in
+    "none" ) ;;  
     "auto" )
       echo "$result"
       ;;
@@ -377,7 +378,12 @@ createDevice () {
       -device usb-storage,drive=${DISK_ID}${index}"
       echo "$result"
       ;;
-    "ide" )
+    "nvme" )
+      result+=",if=none \
+      -device nvme,drive=${DISK_ID}${index},serial=deadbeaf${DISK_INDEX}"
+      echo "$result"
+      ;;      
+    "ide" | "sata" )
       result+=",if=none \
       -device ich9-ahci,id=ahci${DISK_INDEX},addr=$DISK_ADDRESS \
       -device ide-hd,drive=${DISK_ID},bus=ahci$DISK_INDEX.0,rotation_rate=$DISK_ROTATION${index}"
@@ -385,7 +391,7 @@ createDevice () {
       ;;
     "blk" | "virtio-blk" )
       result+=",if=none \
-      -device virtio-blk-pci,drive=${DISK_ID},scsi=off,bus=pcie.0,addr=$DISK_ADDRESS,iothread=io2${index}"
+      -device virtio-blk-pci,drive=${DISK_ID},bus=pcie.0,addr=$DISK_ADDRESS,iothread=io2${index}"
       echo "$result"
       ;;
     "scsi" | "virtio-scsi" )
@@ -410,7 +416,7 @@ addDisk () {
   local DISK_FMT=$7
   local DISK_IO=$8
   local DISK_CACHE=$9
-  local DISK_EXT DIR DATA_SIZE FS PREV_FMT PREV_EXT CUR_SIZE OPTS
+  local DISK_EXT DIR DATA_SIZE FS PREV_FMT PREV_EXT CUR_SIZE
 
   DISK_EXT=$(fmt2ext "$DISK_FMT")
   local DISK_FILE="$DISK_BASE.$DISK_EXT"
@@ -424,11 +430,11 @@ addDisk () {
   DATA_SIZE=$(numfmt --from=iec "$DISK_SPACE")
 
   if (( DATA_SIZE < 1 )); then
-      error "Invalid value for ${DISK_DESC^^}_SIZE: $DISK_SPACE" && exit 73
+    error "Invalid value for ${DISK_DESC^^}_SIZE: $DISK_SPACE" && exit 73
   fi
 
   if (( DATA_SIZE < 6442450944 )); then
-      error "Please increase ${DISK_DESC^^}_SIZE to at least 6 GB." && exit 73
+    error "Please increase ${DISK_DESC^^}_SIZE to at least 6 GB." && exit 73
   fi
 
   FS=$(stat -f -c %T "$DIR")
@@ -495,7 +501,7 @@ html "Initializing disks..."
 [ -z "${DISK_NAME:-}" ] && DISK_NAME="data"
 
 case "${DISK_TYPE,,}" in
-  "ide" | "usb" | "scsi" | "blk" | "auto" ) ;;
+  "ide" | "sata" | "nvme" | "usb" | "scsi" | "blk" | "auto" | "none" ) ;;
   * ) error "Invalid DISK_TYPE specified, value \"$DISK_TYPE\" is not recognized!" && exit 80 ;;
 esac
 

src/display.sh

@@ -6,6 +6,7 @@ set -Eeuo pipefail
 : "${GPU:="N"}"         # GPU passthrough
 : "${VGA:="virtio"}"    # VGA adaptor
 : "${DISPLAY:="none"}"  # Display type
+: "${RENDERNODE:="/dev/dri/renderD128"}"  # Render node
 
 if [[ "$GPU" != [Yy1]* ]] || [[ "$ARCH" != "amd64" ]]; then
 
@@ -15,20 +16,24 @@ if [[ "$GPU" != [Yy1]* ]] || [[ "$ARCH" != "amd64" ]]; then
 
 fi
 
-DISPLAY_OPTS="-display egl-headless,rendernode=/dev/dri/renderD128"
+DISPLAY_OPTS="-display egl-headless,rendernode=$RENDERNODE"
 DISPLAY_OPTS+=" -vga $VGA"
 
 [ ! -d /dev/dri ] && mkdir -m 755 /dev/dri
 
-if [ ! -c /dev/dri/card0 ]; then
-  if mknod /dev/dri/card0 c 226 0; then
-    chmod 666 /dev/dri/card0
+# Extract the card number from the render node
+CARD_NUMBER=$(echo "$RENDERNODE" | grep -oP '(?<=renderD)\d+')
+CARD_DEVICE="/dev/dri/card$((CARD_NUMBER - 128))"
+
+if [ ! -c "$CARD_DEVICE" ]; then
+  if mknod "$CARD_DEVICE" c 226 $((CARD_NUMBER - 128)); then
+    chmod 666 "$CARD_DEVICE"
   fi
 fi
 
-if [ ! -c /dev/dri/renderD128 ]; then
-  if mknod /dev/dri/renderD128 c 226 128; then
-    chmod 666 /dev/dri/renderD128
+if [ ! -c "$RENDERNODE" ]; then
+  if mknod "$RENDERNODE" c 226 "$CARD_NUMBER"; then
+    chmod 666 "$RENDERNODE"
   fi
 fi
 

src/install.sh

@@ -170,7 +170,7 @@ if [ ! -s "$RDC" ]; then
 
     html "$MSG..."
     /run/progress.sh "$PAT" "$SIZE" "$MSG ([P])..." &
-    { wget "$LOC" -O "$PAT" -q --no-check-certificate --timeout=10 --show-progress "$PROGRESS"; rc=$?; } || :
+    { wget "$LOC" -O "$PAT" -q --no-check-certificate --timeout=10 --no-http-keep-alive --show-progress "$PROGRESS"; rc=$?; } || :
 
     fKill "progress.sh"
 
@@ -251,7 +251,7 @@ else
 
   /run/progress.sh "$PAT" "$SIZE" "$MSG ([P])..." &
 
-  { wget "$URL" -O "$PAT" -q --no-check-certificate --timeout=10 --show-progress "$PROGRESS"; rc=$?; } || :
+  { wget "$URL" -O "$PAT" -q --no-check-certificate --timeout=10 --no-http-keep-alive --show-progress "$PROGRESS"; rc=$?; } || :
 
   fKill "progress.sh"
 

src/network.sh

@@ -6,8 +6,9 @@ set -Eeuo pipefail
 : "${MAC:=""}"
 : "${DHCP:="N"}"
 : "${NETWORK:="Y"}"
-: "${HOST_PORTS:=""}"
 : "${USER_PORTS:=""}"
+: "${HOST_PORTS:=""}"
+: "${ADAPTER:="virtio-net-pci"}"
 
 : "${VM_NET_DEV:=""}"
 : "${VM_NET_TAP:="dsm"}"
@@ -35,12 +36,27 @@ configureDHCP() {
   fi
 
   # Create a macvtap network for the VM guest
-  { ip link add link "$VM_NET_DEV" name "$VM_NET_TAP" address "$VM_NET_MAC" type macvtap mode bridge ; rc=$?; } || :
+  { msg=$(ip link add link "$VM_NET_DEV" name "$VM_NET_TAP" address "$VM_NET_MAC" type macvtap mode bridge 2>&1); rc=$?; } || :
 
-  if (( rc != 0 )); then
-    error "Cannot create macvtap interface. Please make sure that the network type is 'macvlan' and not 'ipvlan',"
-    error "that your kernel is recent (>4) and supports it, and that the container has the NET_ADMIN capability set." && return 1
-  fi
+  case "$msg" in
+    "RTNETLINK answers: File exists"* )
+      while ! ip link add link "$VM_NET_DEV" name "$VM_NET_TAP" address "$VM_NET_MAC" type macvtap mode bridge; do
+        info "Waiting for macvtap interface to become available.."
+        sleep 5
+      done  ;;
+    "RTNETLINK answers: Invalid argument"* )
+      error "Cannot create macvtap interface. Please make sure that the network type of the container is 'macvlan' and not 'ipvlan'."
+      return 1 ;;
+    "RTNETLINK answers: Operation not permitted"* )
+      error "No permission to create macvtap interface. Please make sure that your host kernel supports it and that the NET_ADMIN capability is set." 
+      return 1 ;;
+    *)
+      [ -n "$msg" ] && echo "$msg" >&2
+      if (( rc != 0 )); then
+        error "Cannot create macvtap interface."
+        return 1
+      fi ;;
+  esac
 
   while ! ip link set "$VM_NET_TAP" up; do
     info "Waiting for MAC address $VM_NET_MAC to become available..."
@@ -152,6 +168,9 @@ configureUser() {
 
 configureNAT() {
 
+  local tuntap="TUN device is missing. $ADD_ERR --device /dev/net/tun"
+  local tables="The 'ip_tables' kernel module is not loaded. Try this command: sudo modprobe ip_tables iptable_nat"
+
   # Create the necessary file structure for /dev/net/tun
   if [ ! -c /dev/net/tun ]; then
     [ ! -d /dev/net ] && mkdir -m 755 /dev/net
@@ -161,7 +180,7 @@ configureNAT() {
   fi
 
   if [ ! -c /dev/net/tun ]; then
-    error "TUN device missing. $ADD_ERR --device /dev/net/tun --cap-add NET_ADMIN" && return 1
+    error "$tuntap" && return 1
   fi
 
   # Check port forwarding flag
@@ -172,9 +191,6 @@ configureNAT() {
     fi
   fi
 
-  local tables="The 'ip_tables' kernel module is not loaded. Try this command: sudo modprobe ip_tables iptable_nat"
-  local tuntap="The 'tun' kernel module is not available. Try this command: 'sudo modprobe tun' or run the container with 'privileged: true'."
-
   # Create a bridge with a static IP for the VM guest
 
   { ip link add dev dockerbridge type bridge ; rc=$?; } || :
@@ -239,7 +255,7 @@ configureNAT() {
 
   NET_OPTS+=",script=no,downscript=no"
 
-  ! configureDNS && return 1
+  configureDNS || return 1
 
   return 0
 }
@@ -286,13 +302,19 @@ checkOS() {
 
   local name
   local os=""
+  local if="macvlan"
   name=$(uname -a)
 
-  [[ "${name,,}" == *"darwin"* ]] && os="MacOS"
-  [[ "${name,,}" == *"microsoft"* ]] && os="Windows"
+  [[ "${name,,}" == *"darwin"* ]] && os="Docker Desktop for macOS"
+  [[ "${name,,}" == *"microsoft"* ]] && os="Docker Desktop for Windows"
+
+  if [[ "$DHCP" == [Yy1]* ]]; then
+    if="macvtap"
+    [[ "${name,,}" == *"synology"* ]] && os="Synology Container Manager"
+  fi
 
   if [ -n "$os" ]; then
-    warn "you are using Docker Desktop for $os which does not support macvlan, please revert to bridge networking!"
+    warn "you are using $os which does not support $if, please revert to bridge networking!"
   fi
 
   return 0
@@ -376,7 +398,7 @@ if [[ "$DHCP" == [Yy1]* ]]; then
   fi
 
   # Configure for macvtap interface
-  ! configureDHCP && exit 20
+  configureDHCP || exit 20
 
   MSG="Booting DSM instance..."
   html "$MSG"
@@ -397,7 +419,7 @@ else
     if ! configureNAT; then
 
       NETWORK="user"
-      warn "falling back to usermode networking! Performance will be bad and port forwarding will not work."
+      warn "falling back to usermode networking! Performance will be bad and port mapping will not work."
 
       ip link set "$VM_NET_TAP" down promisc off &> null || true
       ip link delete "$VM_NET_TAP" &> null || true
@@ -412,12 +434,12 @@ else
   if [[ "${NETWORK,,}" == "user"* ]]; then
 
     # Configure for usermode networking (slirp)
-    ! configureUser && exit 24
+    configureUser || exit 24
 
   fi
 
 fi
 
-NET_OPTS+=" -device virtio-net-pci,romfile=,netdev=hostnet0,mac=$VM_NET_MAC,id=net0"
+NET_OPTS+=" -device $ADAPTER,romfile=,netdev=hostnet0,mac=$VM_NET_MAC,id=net0"
 
 return 0

src/proc.sh

@@ -34,15 +34,11 @@ if [[ "$KVM" != [Nn]* ]]; then
   if [ -n "$KVM_ERR" ]; then
     KVM="N"
     if [[ "$OSTYPE" =~ ^darwin ]]; then
-      warn "you are using MacOS which has no KVM support, this will cause a major loss of performance."
+      warn "you are using macOS which has no KVM support, this will cause a major loss of performance."
     else
-      if grep -qi Microsoft /proc/version; then
-        warn "you are using Windows 10 which has no KVM support, this will cause a major loss of performance."
-      else
-        error "KVM acceleration not available $KVM_ERR, this will cause a major loss of performance."
-        error "See the FAQ on how to diagnose the cause, or continue without KVM by setting KVM=N (not recommended)."
-        [[ "$DEBUG" != [Yy1]* ]] && exit 88
-      fi
+      error "KVM acceleration not available $KVM_ERR, this will cause a major loss of performance."
+      error "See the FAQ on how to diagnose the cause, or continue without KVM by setting KVM=N (not recommended)."
+      [[ "$DEBUG" != [Yy1]* ]] && exit 88
     fi
   fi
 

src/reset.sh

@@ -15,23 +15,24 @@ echo "❯ For support visit $SUPPORT"
 
 # Docker environment variables
 
-: "${TZ:=""}"             # System local timezone
-: "${DEBUG:="N"}"         # Disable debugging mode
-: "${COUNTRY:=""}"        # Country code for mirror
-: "${CONSOLE:="N"}"       # Disable console mode
-: "${ALLOCATE:=""}"       # Preallocate diskspace
-: "${ARGUMENTS:=""}"      # Extra QEMU parameters
-: "${CPU_CORES:="1"}"     # Amount of CPU cores
-: "${RAM_SIZE:="1G"}"     # Maximum RAM amount
-: "${RAM_CHECK:="Y"}"     # Check available RAM
-: "${DISK_SIZE:="16G"}"   # Initial data disk size
+: "${TZ:=""}"              # System local timezone
+: "${DEBUG:="N"}"          # Disable debugging mode
+: "${COMMIT:="N"}"         # Commit to local image
+: "${COUNTRY:=""}"         # Country code for mirror
+: "${CONSOLE:="N"}"        # Disable console mode
+: "${ALLOCATE:=""}"        # Preallocate diskspace
+: "${ARGUMENTS:=""}"       # Extra QEMU parameters
+: "${CPU_CORES:="1"}"      # Amount of CPU cores
+: "${RAM_SIZE:="1G"}"      # Maximum RAM amount
+: "${RAM_CHECK:="Y"}"      # Check available RAM
+: "${DISK_SIZE:="16G"}"    # Initial data disk size
+: "${STORAGE:="/storage"}" # Storage folder location
 
 # Helper variables
 
 PROCESS="${APP,,}"
 PROCESS="${PROCESS// /-}"
 
-STORAGE="/storage"
 INFO="/run/shm/msg.html"
 PAGE="/run/shm/index.html"
 TEMPLATE="/var/www/index.html"
@@ -53,12 +54,25 @@ else
 fi
 
 if ! grep -qi "model name" <<< "$CPI"; then
-  CPU="Unknown"
+  CPU=""
 else
   CPU=$(echo "$CPI" | grep -m 1 -i 'model name' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
-  CPU="${CPU// with Radeon Graphics/}"
 fi
 
+if [ -z "${CPU// /}" ] && grep -qi "model:" <<< "$CPI"; then
+  CPU=$(echo "$CPI" | grep -m 1 -i 'model:' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
+fi
+
+CPU="${CPU// CPU/}"
+CPU="${CPU// 16 Core/}"
+CPU="${CPU// 32 Core/}"
+CPU="${CPU// 64 Core/}"
+CPU="${CPU// Processor/}"
+CPU="${CPU// Quad core/}"
+CPU="${CPU// Core TM/ Core}"
+CPU="${CPU// with Radeon Graphics/}"
+[ -z "${CPU// /}" ] && CPU="Unknown"
+
 # Check system
 
 if [ ! -d "/dev/shm" ]; then
@@ -69,8 +83,13 @@ fi
 
 # Check folder
 
-if [ ! -d "$STORAGE" ]; then
-  error "Storage folder ($STORAGE) not found!" && exit 13
+if [[ "$COMMIT" != [Nn]* ]]; then
+  STORAGE="/local"
+  mkdir -p "$STORAGE"
+else
+  if [ ! -d "$STORAGE" ]; then
+    error "Storage folder ($STORAGE) not found!" && exit 13
+  fi
 fi
 
 # Check filesystem
@@ -93,11 +112,13 @@ WANTED_GB=$(( (RAM_WANTED + 1073741823)/1073741824 ))
 
 # Print system info
 SYS="${SYS/-generic/}"
+FS="${FS/UNKNOWN //}"
 FS="${FS/ext2\/ext3/ext4}"
+FS=$(echo "$FS" | sed 's/[)(]//g')
 SPACE=$(df --output=avail -B 1 "$STORAGE" | tail -n 1)
 SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
 
-echo "❯ CPU: ${CPU} | RAM: $AVAIL_GB/$TOTAL_GB GB | DISK: $SPACE_GB GB (${FS}) | HOST: ${SYS}..."
+echo "❯ CPU: ${CPU} | RAM: $AVAIL_GB/$TOTAL_GB GB | DISK: $SPACE_GB GB (${FS}) | KERNEL: ${SYS}..."
 echo
 
 # Check memory

web/index.html

@@ -5,8 +5,8 @@
         [1]
         <meta http-equiv="Cache-Control" content="no-cache" />
         <meta name="viewport" content="width=device-width, initial-scale=1.0" />
-        <link rel="stylesheet" type="text/css" href="/css/style.css" />
-        <link rel="icon" href="/img/favicon.svg" type="image/x-icon">
+        <link rel="stylesheet" type="text/css" href="css/style.css" />
+        <link rel="icon" href="img/favicon.svg" type="image/x-icon">
         [2]
     </head>
 
@@ -28,7 +28,7 @@
                 [5]
             </footer>
         </div>
-        <script type="text/javascript" src="/js/script.js"></script>
+        <script type="text/javascript" src="js/script.js"></script>
     </body>
 
 </html>

web/js/script.js

@@ -3,7 +3,7 @@ var interval = 1000;
 
 function getInfo() {
 
-    var url = "/msg.html";
+    var url = "msg.html";
 
     try {