feat: New extraction method (#954)

.devcontainer.json

@@ -0,0 +1,6 @@
+{
+  "name": "dsm",
+  "service": "dsm",
+  "forwardPorts": [5000],
+  "dockerComposeFile": "compose.yml"
+}

.github/workflows/build.yml

@@ -54,7 +54,7 @@ jobs:
           labels: |
             org.opencontainers.image.title=${{ vars.NAME }}
         env:
-          DOCKER_METADATA_ANNOTATIONS_LEVELS: manifest,index            
+          DOCKER_METADATA_ANNOTATIONS_LEVELS: manifest,index
       - 
         name: Set up Docker Buildx
         uses: docker/setup-buildx-action@v3

.github/workflows/check.yml

@@ -20,5 +20,5 @@ jobs:
         uses: hadolint/hadolint-action@v3.1.0
         with:
           dockerfile: Dockerfile
-          ignore: DL3008,DL3003,DL3006
+          ignore: DL3008,DL3003,DL3006,DL3013
           failure-threshold: warning

Dockerfile

@@ -7,7 +7,7 @@ FROM qemux/qemu-host:2.05 AS builder
 #  RUN go mod download
 #  RUN CGO_ENABLED=0 GOOS=linux go build -a -installsuffix cgo -o /qemu-host.bin .
 
-FROM debian:trixie-20240926-slim
+FROM debian:trixie-slim
 
 ARG TARGETPLATFORM
 ARG VERSION_ARG="0.0"
@@ -15,19 +15,21 @@ ARG DEBCONF_NOWARNINGS="yes"
 ARG DEBIAN_FRONTEND="noninteractive"
 ARG DEBCONF_NONINTERACTIVE_SEEN="true"
 
-RUN set -eu && extra="" && \
-    if [ "$TARGETPLATFORM" != "linux/amd64" ]; then extra="qemu-user"; fi && \
+RUN set -eu && \
     apt-get update && \
     apt-get --no-install-recommends -y install \
         jq \
         tini \
         curl \
-        cpio \
         wget \
         fdisk \
         unzip \
         nginx \
         procps \
+        python3 \
+        python3-pip \
+        python3-msgpack \
+        python3-pysodium \
         xz-utils \
         iptables \
         iproute2 \
@@ -35,12 +37,16 @@ RUN set -eu && extra="" && \
         dnsmasq \
         fakeroot \
         net-tools \
+        e2fsprogs \
         qemu-utils \
+        iputils-ping \
         ca-certificates \
         netcat-openbsd \
-        qemu-system-x86 \
-        "$extra" && \
+        qemu-system-x86 && \
     apt-get clean && \
+    pip3 install --no-cache-dir --break-system-packages dissect.cstruct && \
+    mkdir -p /etc/qemu && \
+    echo "allow br0" > /etc/qemu/bridge.conf && \
     unlink /etc/nginx/sites-enabled/default && \
     sed -i 's/^worker_processes.*/worker_processes 1;/' /etc/nginx/nginx.conf && \
     echo "$VERSION_ARG" > /run/version && \
@@ -49,7 +55,8 @@ RUN set -eu && extra="" && \
 COPY --chmod=755 ./src /run/
 COPY --chmod=755 ./web /var/www/
 COPY --chmod=755 --from=builder /qemu-host.bin /run/host.bin
-COPY --chmod=744 ./web/nginx.conf /etc/nginx/sites-enabled/web.conf
+COPY --chmod=744 ./web/conf/nginx.conf /etc/nginx/sites-enabled/web.conf
+ADD --chmod=775 https://raw.githubusercontent.com/sud0woodo/patology/refs/heads/main/patology.py /run/extract.py
 
 VOLUME /storage
 EXPOSE 22 139 445 5000

compose.yml

@@ -1,15 +1,17 @@
 services:
-    dsm:
-        container_name: dsm
-        image: vdsm/virtual-dsm:latest
-        environment:
-            DISK_SIZE: "16G"
-        devices:
-            - /dev/kvm
-        cap_add:
-            - NET_ADMIN
-        ports:
-            - 5000:5000
-        volumes:
-            - /var/dsm:/storage
-        stop_grace_period: 2m
+  dsm:
+    container_name: dsm
+    image: vdsm/virtual-dsm
+    environment:
+      DISK_SIZE: "16G"
+    devices:
+      - /dev/kvm
+      - /dev/net/tun
+    cap_add:
+      - NET_ADMIN
+    ports:
+      - 5000:5000
+    volumes:
+      - ./dsm:/storage
+    restart: always
+    stop_grace_period: 2m

kubernetes.yml

@@ -1,59 +1,77 @@
+---
 apiVersion: v1
 kind: PersistentVolumeClaim
 metadata:
   name: dsm-pvc
 spec:
   accessModes:
-    - ReadWriteOnce
+  - ReadWriteOnce
   resources:
     requests:
       storage: 16Gi
 ---
-apiVersion: v1
-kind: Pod
+apiVersion: apps/v1
+kind: Deployment
 metadata:
   name: dsm
   labels:
     name: dsm
 spec:
-  terminationGracePeriodSeconds: 120 # the Kubernetes default is 30 seconds and it may be not enough
-  containers:
-    - name: dsm
-      image: vdsm/virtual-dsm
-      ports:
-        - containerPort: 5000
-          protocol: TCP
-      securityContext:
-        privileged: true
-      env:
-        - name: RAM_SIZE
-          value: 1G
-        - name: CPU_CORES
-          value: "1"
+  replicas: 1
+  selector:
+    matchLabels:
+      app: dsm
+  template:
+    metadata:
+      labels:
+        app: dsm
+    spec:
+      containers:
+      - name: dsm
+        image: vdsm/virtual-dsm
+        env:
         - name: DISK_SIZE
-          value: "16G"  # Kubernetes uses Gi, but DSM uses GB
-      volumeMounts:
+          value: "16G"
+        ports:
+          - containerPort: 5000
+            name: http
+            protocol: TCP
+        securityContext:
+          capabilities:
+            add:
+            - NET_ADMIN
+          privileged: true
+        volumeMounts:
         - mountPath: /storage
           name: storage
         - mountPath: /dev/kvm
           name: dev-kvm
-  volumes:
-    - name: storage
-      persistentVolumeClaim:
-        claimName: dsm-pvc
-    - name: dev-kvm
-      hostPath:
-        path: /dev/kvm
+        - mountPath: /dev/net/tun
+          name: dev-tun
+      terminationGracePeriodSeconds: 120
+      volumes:
+      - name: storage
+        persistentVolumeClaim:
+          claimName: dsm-pvc
+      - hostPath:
+          path: /dev/kvm
+        name: dev-kvm
+      - hostPath:
+          path: /dev/net/tun
+          type: CharDevice
+        name: dev-tun
 ---
 apiVersion: v1
 kind: Service
 metadata:
   name: dsm
 spec:
-  type: NodePort
-  selector:
-    name: dsm
+  internalTrafficPolicy: Cluster
   ports:
-    - name: tcp-5000
+    - name: http
       port: 5000
+      protocol: TCP
       targetPort: 5000
+  selector:
+    app: dsm
+  type: ClusterIP

readme.md

@@ -22,7 +22,7 @@ Virtual DSM in a Docker container.
  
 ## Usage  🐳
 
-Via Docker Compose:
+##### Via Docker Compose:
 
 ```yaml
 services:
@@ -33,38 +33,46 @@ services:
       DISK_SIZE: "16G"
     devices:
       - /dev/kvm
+      - /dev/net/tun
     cap_add:
       - NET_ADMIN
     ports:
       - 5000:5000
     volumes:
-      - /var/dsm:/storage
+      - ./dsm:/storage
+    restart: always
     stop_grace_period: 2m
 ```
 
-Via Docker CLI:
+##### Via Docker CLI:
 
 ```bash
-docker run -it --rm -p 5000:5000 --device=/dev/kvm --cap-add NET_ADMIN --stop-timeout 120 vdsm/virtual-dsm
+docker run -it --rm --name dsm -p 5000:5000 --device=/dev/kvm --device=/dev/net/tun --cap-add NET_ADMIN -v ${PWD:-.}/dsm:/storage --stop-timeout 120 vdsm/virtual-dsm
 ```
 
-Via Kubernetes:
+##### Via Kubernetes:
 
 ```shell
-kubectl apply -f kubernetes.yml
+kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/master/kubernetes.yml
 ```
 
+##### Via Github Codespaces:
+
+[![Open in GitHub Codespaces](https://github.com/codespaces/badge.svg)](https://github.com/codespaces/new?repo=619260050&machine=basicLinux32gb)
+
 ## FAQ 💬
 
 ### How do I use it?
 
   Very simple! These are the steps:
   
-  - Start the container and connect to [port 5000](http://localhost:5000) using your web browser.
+  - Start the container and connect to [port 5000](http://127.0.0.1:5000/) using your web browser.
 
-  - Wait until DSM is ready, choose an username and password, and you will be taken to the desktop.
+  - Wait until DSM finishes its installation
+ 
+  - Choose an username and password, and you will be taken to the desktop.
   
-  Enjoy your brand new machine, and don't forget to star this repo!
+  Enjoy your brand new NAS, and don't forget to star this repo!
 
 ### How do I change the storage location?
 
@@ -72,10 +80,10 @@ kubectl apply -f kubernetes.yml
 
   ```yaml
   volumes:
-    - /var/dsm:/storage
+    - ./dsm:/storage
   ```
 
-  Replace the example path `/var/dsm` with the desired storage folder.
+  Replace the example path `./dsm` with the desired storage folder or named volume.
  
 ### How do I change the size of the disk?
 
@@ -91,7 +99,7 @@ kubectl apply -f kubernetes.yml
 
 ### How do I create a growable disk?
 
-  By default, the entire capacity of the disk is reserved in advance.
+  By default, the entire capacity of the disk will be reserved in advance.
 
   To create a growable disk that only allocates space that is actually used, add the following environment variable:
 
@@ -100,9 +108,6 @@ kubectl apply -f kubernetes.yml
     DISK_FMT: "qcow2"
   ```
 
-> [!NOTE]
-> This may reduce the write performance of the disk.
-
 ### How do I add multiple disks?
 
   To create additional disks, modify your compose file like this:
@@ -112,26 +117,22 @@ kubectl apply -f kubernetes.yml
     DISK2_SIZE: "32G"
     DISK3_SIZE: "64G"
   volumes:
-    - /home/example:/storage2
-    - /mnt/data/example:/storage3
+    - ./example2:/storage2
+    - ./example3:/storage3
   ```
 
 ### How do I pass-through a disk?
 
-   It is possible to pass-through a disk device directly, by adding it to your compose file in this way:
+   It is possible to pass-through a disk device directly, which can be useful when your host is a virtual machine, as it removes an extra layer and allows for easier image management on the host.
+   
+   For use with physical disks this method provides little advantage over using an image and is not recommended. You can add the device to your compose file like this:
 
   ```yaml
   devices:
-    - /dev/disk/by-uuid/12345-12345-12345-12345-12345:/disk2
+    - /dev/sdc:/disk1
   ```
 
-  Make sure to bind the disk via its UUID (obtainable via `lsblk -o name,uuid`) instead of its name (`/dev/sdc`), to prevent ever binding the wrong disk when the drive letters happen to change. 
-
-> [!IMPORTANT]
-> The device needs to be totally empty (without any partition table) otherwise DSM does not always format it into a volume.
-
-> [!CAUTION]
-> Do NOT use this feature with the goal of sharing files from the host, they will all be lost without warning when DSM creates the volume.
+  Replace `/dev/sdc` with the name of the disk. It needs to be totally empty (without any partition table) otherwise DSM does not always format it into a volume.
 
 ### How do I change the amount of CPU or RAM?
 
@@ -147,24 +148,31 @@ kubectl apply -f kubernetes.yml
 
 ### How do I verify if my system supports KVM?
 
-  To verify that your system supports KVM, run the following commands:
+  First check if your software is compatible using this chart:
+
+  | **Product**  | **Linux** | **Win11** | **Win10** | **macOS** |
+  |---|---|---|---|---|
+  | Docker CLI        | ✅   | ✅       | ❌        | ❌ |
+  | Docker Desktop    | ❌   | ✅       | ❌        | ❌ | 
+  | Podman CLI        | ✅   | ✅       | ❌        | ❌ | 
+  | Podman Desktop    | ✅   | ✅       | ❌        | ❌ | 
+
+  After that you can run the following commands in Linux to check your system:
 
   ```bash
   sudo apt install cpu-checker
   sudo kvm-ok
   ```
 
-  If you receive an error from `kvm-ok` indicating that KVM acceleration can't be used, please check whether:
+  If you receive an error from `kvm-ok` indicating that KVM cannot be used, please check whether:
 
   - the virtualization extensions (`Intel VT-x` or `AMD SVM`) are enabled in your BIOS.
 
-  - you are running an operating system that supports them, like Linux or Windows 11 (macOS and Windows 10 do not unfortunately).
-
   - you enabled "nested virtualization" if you are running the container inside a virtual machine.
 
   - you are not using a cloud provider, as most of them do not allow nested virtualization for their VPS's.
 
-  If you didn't receive any error from `kvm-ok` at all, but the container still complains that `/dev/kvm` is missing, it might help to add `privileged: true` to your compose file (or `--privileged` to your `run` command), to rule out any permission issue.
+  If you did not receive any error from `kvm-ok` but the container still complains about a missing KVM device, it could help to add `privileged: true` to your compose file (or `sudo` to your `docker` command) to rule out any permission issue.
 
 ### How do I assign an individual IP address to the container?
 
@@ -207,7 +215,7 @@ kubectl apply -f kubernetes.yml
 
   After configuring the container for [macvlan](#how-do-i-assign-an-individual-ip-address-to-the-container), it is possible for DSM to become part of your home network by requesting an IP from your router, just like your other devices.
 
-  To enable this mode, add the following lines to your compose file:
+  To enable this mode, in which the container and DSM will have separate IP addresses, add the following lines to your compose file:
 
   ```yaml
   environment:
@@ -218,9 +226,6 @@ kubectl apply -f kubernetes.yml
     - 'c *:* rwm'
   ```
 
-> [!NOTE]
-> In this mode, the container and DSM will each have their own separate IPs.
-
 ### How do I pass-through the GPU?
 
   To pass-through your Intel GPU, add the following lines to your compose file:
@@ -232,33 +237,41 @@ kubectl apply -f kubernetes.yml
     - /dev/dri
   ```
 
-> [!TIP]
-> This can be used to enable the facial recognition function in Synology Photos for example.
+> [!NOTE]
+> This can be used to enable the facial recognition function in Synology Photos, but does not provide hardware transcoding for video.
 
 ### How do I install a specific version of vDSM?
 
-  By default, version 7.2 will be installed, but if you prefer an older version, you can add its download URL to your compose file as follows:
+  By default, version 7.2 will be installed, but if you prefer an older version, you can add the download URL of the `.pat` file to your compose file as follows:
 
   ```yaml
   environment:
     URL: "https://global.synologydownload.com/download/DSM/release/7.0.1/42218/DSM_VirtualDSM_42218.pat"
   ```
 
-  With this method, it is even possible to switch between different versions while keeping all your file data intact.
-
-  If you don't have internet access, it's also possible to skip the download by setting URL to:
+  With this method, it is even possible to switch back and forth between versions while keeping your file data intact.
 
+  Alternatively, you can also skip the download and use a local file instead, by binding it in your compose file in this way:
+  
   ```yaml
-  environment:
-    URL: "DSM_VirtualDSM_42218.pat"
+  volumes:
+    - ./DSM_VirtualDSM_42218.pat:/boot.pat
   ```
 
-  after placing a file called `DSM_VirtualDSM_42218.pat` in your `/storage` folder.
+  Replace the example path `./DSM_VirtualDSM_42218.pat` with the filename of your desired `.pat` file. The value of `URL` will be ignored in this case.
 
 ### What are the differences compared to the standard DSM?
 
   There are only two minor differences: the Virtual Machine Manager package is not available, and Surveillance Station will not include any free licenses.
-  
+
+### How do I run Windows in a container?
+
+  You can use [dockur/windows](https://github.com/dockur/windows) for that. It shares many of the same features, and even has completely automatic installation.
+
+### How do I run a Linux desktop in a container?
+
+  You can use [qemus/qemu](https://github.com/qemus/qemu) in that case.
+
 ### Is this project legal?
 
   Yes, this project contains only open-source code and does not distribute any copyrighted material. Neither does it try to circumvent any copyright protection measures. So under all applicable laws, this project will be considered legal. 

src/config.sh

@@ -17,21 +17,27 @@ ARGS=$(echo "$ARGS" | sed 's/\t/ /g' | tr -s ' ')
 if [[ "$RAM_CHECK" != [Nn]* ]]; then
 
   RAM_AVAIL=$(free -b | grep -m 1 Mem: | awk '{print $7}')
-  AVAIL_GB=$(( RAM_AVAIL/1073741824 ))
+  AVAIL_MEM=$(formatBytes "$RAM_AVAIL")
 
   if (( (RAM_WANTED + RAM_SPARE) > RAM_AVAIL )); then
-    error "Your configured RAM_SIZE of $WANTED_GB GB is too high for the $AVAIL_GB GB of memory available, please set a lower value."
-    exit 17
-  fi
-
-  if (( (RAM_WANTED + (RAM_SPARE * 3)) > RAM_AVAIL )); then
-    warn "your configured RAM_SIZE of $WANTED_GB GB is very close to the $AVAIL_GB GB of memory available, please consider a lower value."
+    msg="Your configured RAM_SIZE of ${RAM_SIZE/G/ GB} is too high for the $AVAIL_MEM of memory available, please set a lower value."
+    [[ "${FS,,}" != "zfs" ]] && error "$msg" && exit 17
+    info "$msg"
+  else
+    if (( (RAM_WANTED + (RAM_SPARE * 3)) > RAM_AVAIL )); then
+      msg="your configured RAM_SIZE of ${RAM_SIZE/G/ GB} is very close to the $AVAIL_MEM of memory available, please consider a lower value."
+      if [[ "${FS,,}" != "zfs" ]]; then
+        warn "$msg"
+      else
+        info "$msg"
+      fi
+    fi
   fi
 
 fi
 
 if [[ "$DEBUG" == [Yy1]* ]]; then
-  printf "Arguments:\n\n%s" "${ARGS// -/$'\n-'}" && echo
+  printf "Arguments:\n\n%s\n\n" "${ARGS// -/$'\n-'}"
 fi
 
 return 0

src/disk.sh

@@ -3,9 +3,9 @@ set -Eeuo pipefail
 
 # Docker environment variables
 
-: "${DISK_IO:="native"}"          # I/O Mode, can be set to 'native', 'threads' or 'io_turing'
+: "${DISK_IO:="native"}"          # I/O Mode, can be set to 'native', 'threads' or 'io_uring'
 : "${DISK_FMT:="raw"}"            # Disk file format, 'raw' by default for best performance
-: "${DISK_TYPE:=""}"              # Device type to be used, choose "ide", "usb", "blk" or "scsi"
+: "${DISK_TYPE:=""}"              # Device type to be used, "sata", "nvme", "blk" or "scsi"
 : "${DISK_FLAGS:=""}"             # Specifies the options for use with the qcow2 disk format
 : "${DISK_CACHE:="none"}"         # Caching mode, can be set to 'writeback' for better performance
 : "${DISK_DISCARD:="on"}"         # Controls whether unmap (TRIM) commands are passed to the host.
@@ -96,7 +96,7 @@ createDisk() {
   local DISK_DESC=$3
   local DISK_FMT=$4
   local FS=$5
-  local DATA_SIZE DIR SPACE FA
+  local DATA_SIZE DIR SPACE GB FA
 
   DATA_SIZE=$(numfmt --from=iec "$DISK_SPACE")
 
@@ -109,16 +109,16 @@ createDisk() {
     SPACE=$(df --output=avail -B 1 "$DIR" | tail -n 1)
 
     if (( DATA_SIZE > SPACE )); then
-      local SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-      error "Not enough free space to create a $DISK_DESC of $DISK_SPACE in $DIR, it has only $SPACE_GB GB available..."
+      GB=$(formatBytes "$SPACE")
+      error "Not enough free space to create a $DISK_DESC of ${DISK_SPACE/G/ GB} in $DIR, it has only $GB available..."
       error "Please specify a smaller ${DISK_DESC^^}_SIZE or disable preallocation by setting ALLOCATE=N." && exit 76
     fi
   fi
 
   html "Creating a $DISK_DESC image..."
-  info "Creating a $DISK_SPACE $DISK_STYLE $DISK_DESC image in $DISK_FMT format..."
+  info "Creating a ${DISK_SPACE/G/ GB} $DISK_STYLE $DISK_DESC image in $DISK_FMT format..."
 
-  local FAIL="Could not create a $DISK_STYLE $DISK_FMT $DISK_DESC image of $DISK_SPACE ($DISK_FILE)"
+  local FAIL="Could not create a $DISK_STYLE $DISK_FMT $DISK_DESC image of ${DISK_SPACE/G/ GB} ($DISK_FILE)"
 
   case "${DISK_FMT,,}" in
     raw)
@@ -141,10 +141,12 @@ createDisk() {
       else
 
         # Create an empty file
-        if ! fallocate -l "$DATA_SIZE" "$DISK_FILE"; then
-          if ! truncate -s "$DATA_SIZE" "$DISK_FILE"; then
-            rm -f "$DISK_FILE"
-            error "$FAIL" && exit 77
+        if ! fallocate -l "$DATA_SIZE" "$DISK_FILE" &>/dev/null; then
+          if ! fallocate -l -x "$DATA_SIZE" "$DISK_FILE"; then
+            if ! truncate -s "$DATA_SIZE" "$DISK_FILE"; then
+              rm -f "$DISK_FILE"
+              error "$FAIL" && exit 77
+            fi
           fi
         fi
 
@@ -180,7 +182,7 @@ resizeDisk() {
   local DISK_DESC=$3
   local DISK_FMT=$4
   local FS=$5
-  local CUR_SIZE DATA_SIZE DIR SPACE
+  local CUR_SIZE DATA_SIZE DIR SPACE GB
 
   CUR_SIZE=$(getSize "$DISK_FILE")
   DATA_SIZE=$(numfmt --from=iec "$DISK_SPACE")
@@ -194,17 +196,17 @@ resizeDisk() {
     SPACE=$(df --output=avail -B 1 "$DIR" | tail -n 1)
 
     if (( REQ > SPACE )); then
-      local SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-      error "Not enough free space to resize $DISK_DESC to $DISK_SPACE in $DIR, it has only $SPACE_GB GB available.."
+      GB=$(formatBytes "$SPACE")
+      error "Not enough free space to resize $DISK_DESC to ${DISK_SPACE/G/ GB} in $DIR, it has only $GB available.."
       error "Please specify a smaller ${DISK_DESC^^}_SIZE or disable preallocation by setting ALLOCATE=N." && exit 74
     fi
   fi
 
-  local GB=$(( (CUR_SIZE + 1073741823)/1073741824 ))
-  MSG="Resizing $DISK_DESC from ${GB}G to $DISK_SPACE..."
+  GB=$(formatBytes "$CUR_SIZE")
+  MSG="Resizing $DISK_DESC from $GB to ${DISK_SPACE/G/ GB}..."
   info "$MSG" && html "$MSG"
 
-  local FAIL="Could not resize the $DISK_STYLE $DISK_FMT $DISK_DESC image from ${GB}G to $DISK_SPACE ($DISK_FILE)"
+  local FAIL="Could not resize the $DISK_STYLE $DISK_FMT $DISK_DESC image from ${GB} to ${DISK_SPACE/G/ GB} ($DISK_FILE)"
 
   case "${DISK_FMT,,}" in
     raw)
@@ -219,9 +221,11 @@ resizeDisk() {
       else
 
         # Resize file by allocating more space
-        if ! fallocate -l "$DATA_SIZE" "$DISK_FILE"; then
-          if ! truncate -s "$DATA_SIZE" "$DISK_FILE"; then
-            error "$FAIL" && exit 75
+        if ! fallocate -l "$DATA_SIZE" "$DISK_FILE" &>/dev/null; then
+          if ! fallocate -l -x "$DATA_SIZE" "$DISK_FILE"; then
+            if ! truncate -s "$DATA_SIZE" "$DISK_FILE"; then
+              error "$FAIL" && exit 75
+            fi
           fi
         fi
 
@@ -257,7 +261,7 @@ convertDisk() {
 
   if [[ "$ALLOCATE" != [Nn]* ]]; then
 
-    local DIR CUR_SIZE SPACE
+    local DIR CUR_SIZE SPACE GB
 
     # Check free diskspace
     DIR=$(dirname "$TMP_FILE")
@@ -265,8 +269,8 @@ convertDisk() {
     SPACE=$(df --output=avail -B 1 "$DIR" | tail -n 1)
 
     if (( CUR_SIZE > SPACE )); then
-      local SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-      error "Not enough free space to convert $DISK_DESC to $DST_FMT in $DIR, it has only $SPACE_GB GB available..."
+      GB=$(formatBytes "$SPACE")
+      error "Not enough free space to convert $DISK_DESC to $DST_FMT in $DIR, it has only $GB available..."
       error "Please free up some disk space or disable preallocation by setting ALLOCATE=N." && exit 76
     fi
   fi
@@ -296,8 +300,10 @@ convertDisk() {
     if [[ "$ALLOCATE" != [Nn]* ]]; then
       # Work around qemu-img bug
       CUR_SIZE=$(stat -c%s "$TMP_FILE")
-      if ! fallocate -l "$CUR_SIZE" "$TMP_FILE"; then
+      if ! fallocate -l "$CUR_SIZE" "$TMP_FILE" &>/dev/null; then
+        if ! fallocate -l -x "$CUR_SIZE" "$TMP_FILE"; then
           error "Failed to allocate $CUR_SIZE bytes for $DISK_DESC image $TMP_FILE"
+        fi
       fi
     fi
   fi
@@ -369,6 +375,7 @@ createDevice () {
   local result=" -drive file=$DISK_FILE,id=$DISK_ID,format=$DISK_FMT,cache=$DISK_CACHE,aio=$DISK_IO,discard=$DISK_DISCARD,detect-zeroes=on"
 
   case "${DISK_TYPE,,}" in
+    "none" ) ;;
     "auto" )
       echo "$result"
       ;;
@@ -377,7 +384,12 @@ createDevice () {
       -device usb-storage,drive=${DISK_ID}${index}"
       echo "$result"
       ;;
-    "ide" )
+    "nvme" )
+      result+=",if=none \
+      -device nvme,drive=${DISK_ID}${index},serial=deadbeaf${DISK_INDEX}"
+      echo "$result"
+      ;;
+    "ide" | "sata" )
       result+=",if=none \
       -device ich9-ahci,id=ahci${DISK_INDEX},addr=$DISK_ADDRESS \
       -device ide-hd,drive=${DISK_ID},bus=ahci$DISK_INDEX.0,rotation_rate=$DISK_ROTATION${index}"
@@ -385,7 +397,7 @@ createDevice () {
       ;;
     "blk" | "virtio-blk" )
       result+=",if=none \
-      -device virtio-blk-pci,drive=${DISK_ID},scsi=off,bus=pcie.0,addr=$DISK_ADDRESS,iothread=io2${index}"
+      -device virtio-blk-pci,drive=${DISK_ID},bus=pcie.0,addr=$DISK_ADDRESS,iothread=io2${index}"
       echo "$result"
       ;;
     "scsi" | "virtio-scsi" )
@@ -410,7 +422,7 @@ addDisk () {
   local DISK_FMT=$7
   local DISK_IO=$8
   local DISK_CACHE=$9
-  local DISK_EXT DIR DATA_SIZE FS PREV_FMT PREV_EXT CUR_SIZE OPTS
+  local DISK_EXT DIR SPACE DATA_SIZE FS PREV_FMT PREV_EXT CUR_SIZE
 
   DISK_EXT=$(fmt2ext "$DISK_FMT")
   local DISK_FILE="$DISK_BASE.$DISK_EXT"
@@ -418,17 +430,19 @@ addDisk () {
   DIR=$(dirname "$DISK_FILE")
   [ ! -d "$DIR" ] && return 0
 
-  [ -z "$DISK_SPACE" ] && DISK_SPACE="16G"
-  DISK_SPACE=$(echo "${DISK_SPACE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
-  [[ -z "${DISK_SPACE//[0-9]}" ]] && DISK_SPACE="${DISK_SPACE}G"
-  DATA_SIZE=$(numfmt --from=iec "$DISK_SPACE")
+  SPACE="${DISK_SPACE// /}"
+  [ -z "$SPACE" ] && SPACE="16G"
+  [ -z "${SPACE//[0-9. ]}" ] && SPACE="${SPACE}G"
+  SPACE=$(echo "${SPACE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
 
-  if (( DATA_SIZE < 1 )); then
-      error "Invalid value for ${DISK_DESC^^}_SIZE: $DISK_SPACE" && exit 73
+  if ! numfmt --from=iec "$SPACE" &>/dev/null; then
+    error "Invalid value for ${DISK_DESC^^}_SIZE: $DISK_SPACE" && exit 73
   fi
 
+  DATA_SIZE=$(numfmt --from=iec "$SPACE")
+
   if (( DATA_SIZE < 6442450944 )); then
-      error "Please increase ${DISK_DESC^^}_SIZE to at least 6 GB." && exit 73
+    error "Please increase ${DISK_DESC^^}_SIZE to at least 6 GB." && exit 73
   fi
 
   FS=$(stat -f -c %T "$DIR")
@@ -459,12 +473,12 @@ addDisk () {
     CUR_SIZE=$(getSize "$DISK_FILE")
 
     if (( DATA_SIZE > CUR_SIZE )); then
-      resizeDisk "$DISK_FILE" "$DISK_SPACE" "$DISK_DESC" "$DISK_FMT" "$FS" || exit $?
+      resizeDisk "$DISK_FILE" "$SPACE" "$DISK_DESC" "$DISK_FMT" "$FS" || exit $?
     fi
 
   else
 
-    createDisk "$DISK_FILE" "$DISK_SPACE" "$DISK_DESC" "$DISK_FMT" "$FS" || exit $?
+    createDisk "$DISK_FILE" "$SPACE" "$DISK_DESC" "$DISK_FMT" "$FS" || exit $?
 
   fi
 
@@ -495,7 +509,7 @@ html "Initializing disks..."
 [ -z "${DISK_NAME:-}" ] && DISK_NAME="data"
 
 case "${DISK_TYPE,,}" in
-  "ide" | "usb" | "scsi" | "blk" | "auto" ) ;;
+  "ide" | "sata" | "nvme" | "usb" | "scsi" | "blk" | "auto" | "none" ) ;;
   * ) error "Invalid DISK_TYPE specified, value \"$DISK_TYPE\" is not recognized!" && exit 80 ;;
 esac
 

src/entry.sh

@@ -1,11 +1,12 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
-APP="Virtual DSM"
-SUPPORT="https://github.com/vdsm/virtual-dsm"
+: "${APP:="Virtual DSM"}"
+: "${SUPPORT:="https://github.com/vdsm/virtual-dsm"}"
 
 cd /run
 
+. utils.sh      # Load functions
 . reset.sh      # Initialize system
 . install.sh    # Run installation
 . disk.sh       # Initialize disks

src/install.sh

@@ -5,24 +5,35 @@ set -Eeuo pipefail
 
 if [ -f "$STORAGE/dsm.ver" ]; then
   BASE=$(<"$STORAGE/dsm.ver")
+  BASE="${BASE//[![:print:]]/}"
   [ -z "$BASE" ] && BASE="DSM_VirtualDSM_69057"
 else
   # Fallback for old installs
   BASE="DSM_VirtualDSM_42962"
 fi
 
+FN="boot.pat"
+if [ -d "/$FN" ]; then
+  error "The file /$FN does not exist, please check that you mapped it to a valid path!" && exit 65
+fi
+
+FILE=$(find / -maxdepth 1 -type f -iname "$FN" | head -n 1)
+[ ! -s "$FILE" ] && FILE=$(find "$STORAGE" -maxdepth 1 -type f -iname "$FN" | head -n 1)
+[ -s "$FILE" ] && BASE="DSM_VirtualDSM" && URL="file://$FILE" 
+
 if [ -n "$URL" ]; then
-  BASE=$(basename "$URL" .pat)
-  if [ ! -s "$STORAGE/$BASE.system.img" ]; then
-    BASE=$(basename "${URL%%\?*}" .pat)
-    : "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
-    BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
+  if [ ! -s "$FILE" ]; then
+    BASE=$(basename "$URL" .pat)
+    if [ ! -s "$STORAGE/$BASE.system.img" ]; then
+      BASE=$(basename "${URL%%\?*}" .pat)
+      : "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
+      BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
+    fi
   fi
-  if [[ "${URL,,}" != "http"* ]]; then
-    if [ -s "$STORAGE/$BASE.pat" ]; then
-      URL="file://$STORAGE/$BASE.pat"
-    else
-      error "File $STORAGE/$BASE.pat does not exist!" && exit 65
+  if [[ "${URL,,}" != "http"* ]] && [[ "${URL,,}" != "file:"* ]] ; then
+    URL="file:///$BASE.pat"
+    if [ ! -s "/$BASE.pat" ]; then
+      error "File '$BASE.pat' does not exist!" && exit 65
     fi
   fi
 fi
@@ -46,11 +57,15 @@ if [ -z "$DL" ]; then
   [[ "${COUNTRY^^}" == "CN" ]] && DL="$DL_CHINA" || DL="$DL_GLOBAL"
 fi
 
-[ -z "$URL" ] && URL="$DL/release/7.2.2/72806/DSM_VirtualDSM_72806.pat"
+if [ -z "$URL" ]; then
+  URL="$DL/release/7.2.2/72806/DSM_VirtualDSM_72806.pat"
+fi
 
-BASE=$(basename "${URL%%\?*}" .pat)
-: "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
-BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
+if [ ! -s "$FILE" ]; then
+  BASE=$(basename "${URL%%\?*}" .pat)
+  : "${BASE//+/ }"; printf -v BASE '%b' "${_//%/\\x}"
+  BASE=$(echo "$BASE" | sed -e 's/[^A-Za-z0-9._-]/_/g')
+fi
 
 if [[ "$URL" != "file://$STORAGE/$BASE.pat" ]]; then
   rm -f "$STORAGE/$BASE.pat"
@@ -85,9 +100,9 @@ else
   TMP="/tmp/dsm"
   TMP_SPACE=2147483648
   SPACE=$(df --output=avail -B 1 /tmp | tail -n 1)
-  SPACE_MB=$(( (SPACE + 1048575)/1048576 ))
+  SPACE_MB=$(formatBytes "$SPACE")
   if (( TMP_SPACE > SPACE )); then
-    error "Not enough free space inside the container, have $SPACE_MB MB available but need at least 2 GB." && exit 93
+    error "Not enough free space inside the container, have $SPACE_MB available but need at least 2 GB." && exit 93
   fi
 fi
 
@@ -96,13 +111,13 @@ rm -rf "$TMP" && mkdir -p "$TMP"
 # Check free diskspace
 ROOT_SPACE=536870912
 SPACE=$(df --output=avail -B 1 / | tail -n 1)
-SPACE_MB=$(( (SPACE + 1048575)/1048576 ))
-(( ROOT_SPACE > SPACE )) && error "Not enough free space inside the container, have $SPACE_MB MB available but need at least 500 MB." && exit 96
+SPACE_MB=$(formatBytes "$SPACE" "down")
+(( ROOT_SPACE > SPACE )) && error "Not enough free space inside the container, have $SPACE_MB available but need at least 500 MB." && exit 96
 
 MIN_SPACE=15032385536
 SPACE=$(df --output=avail -B 1 "$STORAGE" | tail -n 1)
-SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
-(( MIN_SPACE > SPACE )) && error "Not enough free space for installation in $STORAGE, have $SPACE_GB GB available but need at least 14 GB." && exit 94
+SPACE_GB=$(formatBytes "$SPACE")
+(( MIN_SPACE > SPACE )) && error "Not enough free space for installation in $STORAGE, have $SPACE_GB available but need at least 14 GB." && exit 94
 
 # Check if output is to interactive TTY
 if [ -t 1 ]; then
@@ -111,128 +126,16 @@ else
   PROGRESS="--progress=dot:giga"
 fi
 
-# Download the required files from the Synology website
-
-ROOT="Y"
-RD="$TMP/rd.gz"
-RDC="$STORAGE/dsm.rd"
-
-if [ ! -s "$RDC" ] && [[ "$URL" == "file://"* ]] && [[ "${URL,,}" == *"_42218.pat" ]]; then
-
-  rm -f "$RD"
-  rm -f "$RDC"
-
-  tar --extract --file="${URL:7}" --directory="$(dirname "$RD")"/. "$(basename "$RD")"
-  cp "$RD" "$RDC"
-
+if [[ "$URL" == "file://"* ]]; then
+  MSG="Copying DSM"
+  ERR="Failed to copy ${URL:7}"
+  info "Install: Copying installation image..."
+else
+  MSG="Downloading DSM"
+  ERR="Failed to download $URL"
+  info "Install: Downloading $BASE.pat..."
 fi
 
-if [ ! -s "$RDC" ]; then
-
-  rm -f "$RD"
-  rm -f "$RDC"
-
-  MSG="Downloading installer"
-  info "Install: $MSG..." && html "$MSG..."
-
-  SIZE=5394188
-  POS="65627648-71021835"
-  VERIFY="b4215a4b213ff5154db0488f92c87864"
-  LOC="$DL/release/7.0.1/42218/DSM_VirtualDSM_42218.pat"
-  [[ "${URL,,}" == *"_42218.pat" ]] && LOC="$URL"
-
-  /run/progress.sh "$RD" "$SIZE" "$MSG ([P])..." &
-  { curl -r "$POS" -sfk --connect-timeout 10 -S -o "$RD" "$LOC"; rc=$?; } || :
-
-  fKill "progress.sh"
-
-  ERR="Failed to download $LOC"
-  (( rc == 3 )) && error "$ERR , cannot write file (disk full?)" && exit 60
-  (( rc == 4 )) && error "$ERR , network failure!" && exit 60
-  (( rc == 8 )) && error "$ERR , server issued an error response!" && exit 60
-
-  if (( rc != 0 )); then
-    if (( rc != 22 )) && (( rc != 56 )); then
-      error "$ERR , reason: $rc" && exit 60
-    fi
-    SUM="skip"
-  else
-    SUM=$(md5sum "$RD" | cut -f 1 -d " ")
-  fi
-
-  if [ "$SUM" != "$VERIFY" ]; then
-
-    PAT="/install.pat"
-    SIZE=379637760
-
-    rm -f "$RD"
-    rm -f "$PAT"
-
-    html "$MSG..."
-    /run/progress.sh "$PAT" "$SIZE" "$MSG ([P])..." &
-    { wget "$LOC" -O "$PAT" -q --no-check-certificate --timeout=10 --show-progress "$PROGRESS"; rc=$?; } || :
-
-    fKill "progress.sh"
-
-    ERR="Failed to download $LOC"
-    (( rc == 3 )) && error "$ERR , cannot write file (disk full?)" && exit 60
-    (( rc == 4 )) && error "$ERR , network failure!" && exit 60
-    (( rc == 8 )) && error "$ERR , server issued an error response!" && exit 60
-    (( rc != 0 )) && error "$ERR , reason: $rc" && exit 60
-
-    tar --extract --file="$PAT" --directory="$(dirname "$RD")"/. "$(basename "$RD")"
-    rm "$PAT"
-
-  fi
-
-  cp "$RD" "$RDC"
-
-fi
-
-if [ -f "$RDC" ]; then
-
-  { xz -dc <"$RDC" >"$TMP/rd" 2>/dev/null; rc=$?; } || :
-  (( rc != 1 )) && error "Failed to unxz $RDC on $FS, reason $rc" && exit 91
-
-  { (cd "$TMP" && cpio -idm <"$TMP/rd" 2>/dev/null); rc=$?; } || :
-
-  if (( rc != 0 )); then
-    ROOT="N"
-    { (cd "$TMP" && fakeroot cpio -idmu <"$TMP/rd" 2>/dev/null); rc=$?; } || :
-    (( rc != 0 )) && error "Failed to extract $RDC on $FS, reason $rc" && exit 92
-  fi
-
-  rm -rf /run/extract && mkdir -p /run/extract
-  for file in $TMP/usr/lib/libcurl.so.4 \
-              $TMP/usr/lib/libmbedcrypto.so.5 \
-              $TMP/usr/lib/libmbedtls.so.13 \
-              $TMP/usr/lib/libmbedx509.so.1 \
-              $TMP/usr/lib/libmsgpackc.so.2 \
-              $TMP/usr/lib/libsodium.so \
-              $TMP/usr/lib/libsynocodesign-ng-virtual-junior-wins.so.7 \
-              $TMP/usr/syno/bin/scemd; do
-    cp "$file" /run/extract/
-  done
-
-  if [ "$ARCH" != "amd64" ]; then
-    mkdir -p /lib64/
-    cp "$TMP/usr/lib/libc.so.6" /lib64/
-    cp "$TMP/usr/lib/libpthread.so.0" /lib64/
-    cp "$TMP/usr/lib/ld-linux-x86-64.so.2" /lib64/
-  fi
-
-  mv /run/extract/scemd /run/extract/syno_extract_system_patch
-  chmod +x /run/extract/syno_extract_system_patch
-
-fi
-
-rm -rf "$TMP" && mkdir -p "$TMP"
-
-info "Install: Downloading $BASE.pat..."
-
-MSG="Downloading DSM"
-ERR="Failed to download $URL"
-
 html "$MSG..."
 
 PAT="/$BASE.pat"
@@ -240,6 +143,10 @@ rm -f "$PAT"
 
 if [[ "$URL" == "file://"* ]]; then
 
+  if [ ! -f "${URL:7}" ]; then
+    error "File '${URL:7}' does not exist!" && exit 65
+  fi
+
   cp "${URL:7}" "$PAT"
 
 else
@@ -251,7 +158,7 @@ else
 
   /run/progress.sh "$PAT" "$SIZE" "$MSG ([P])..." &
 
-  { wget "$URL" -O "$PAT" -q --no-check-certificate --timeout=10 --show-progress "$PROGRESS"; rc=$?; } || :
+  { wget "$URL" -O "$PAT" -q --no-check-certificate --timeout=10 --no-http-keep-alive --show-progress "$PROGRESS"; rc=$?; } || :
 
   fKill "progress.sh"
 
@@ -270,7 +177,7 @@ if ((SIZE<250000000)); then
   error "The specified PAT file is probably an update pack as it's too small." && exit 62
 fi
 
-MSG="Extracting downloaded image..."
+MSG="Extracting installation image..."
 info "Install: $MSG" && html "$MSG"
 
 if { tar tf "$PAT"; } >/dev/null 2>&1; then
@@ -279,22 +186,15 @@ if { tar tf "$PAT"; } >/dev/null 2>&1; then
 
 else
 
-  export LD_LIBRARY_PATH="/run/extract"
+  { (cd "$TMP" && python3 /run/extract.py -i "$PAT" -d 2>/run/extract.log); rc=$?; } || :
 
-  if [ "$ARCH" == "amd64" ]; then
-    { /run/extract/syno_extract_system_patch "$PAT" "$TMP/."; rc=$?; } || :
-  else
-    { qemu-x86_64 /run/extract/syno_extract_system_patch "$PAT" "$TMP/."; rc=$?; } || :
+  if (( rc != 0 )); then
+    cat /run/extract.log
+    error "Failed to extract PAT file, reason $rc" && exit 63
   fi
 
-  export LD_LIBRARY_PATH=""
-
-  (( rc != 0 )) && error "Failed to extract PAT file, reason $rc" && exit 63
-
 fi
 
-rm -rf /run/extract
-
 MSG="Preparing system partition..."
 info "Install: $MSG" && html "$MSG"
 
@@ -310,10 +210,10 @@ rm -f "$SYSTEM"
 # Check free diskspace
 SYSTEM_SIZE=10738466816
 SPACE=$(df --output=avail -B 1 "$STORAGE" | tail -n 1)
-SPACE_MB=$(( (SPACE + 1048575)/1048576 ))
+SPACE_MB=$(formatBytes "$SPACE")
 
 if (( SYSTEM_SIZE > SPACE )); then
-  error "Not enough free space in $STORAGE to create a 10 GB system disk, have only $SPACE_MB MB available." && exit 97
+  error "Not enough free space in $STORAGE to create a 10 GB system disk, have only $SPACE_MB available." && exit 97
 fi
 
 if ! touch "$SYSTEM"; then
@@ -328,10 +228,12 @@ if [[ "${FS,,}" == "btrfs" ]]; then
   fi
 fi
 
-if ! fallocate -l "$SYSTEM_SIZE" "$SYSTEM"; then
-  if ! truncate -s "$SYSTEM_SIZE" "$SYSTEM"; then
-    rm -f "$SYSTEM"
-    error "Could not allocate file $SYSTEM for the system disk." && exit 98
+if ! fallocate -l "$SYSTEM_SIZE" "$SYSTEM" &>/dev/null; then
+  if ! fallocate -l -x "$SYSTEM_SIZE" "$SYSTEM"; then
+    if ! truncate -s "$SYSTEM_SIZE" "$SYSTEM"; then
+      rm -f "$SYSTEM"
+      error "Could not allocate file $SYSTEM for the system disk." && exit 98
+    fi
   fi
 fi
 
@@ -379,22 +281,10 @@ OFFSET="1048576"    # 2048 * 512
 NUMBLOCKS="2097152" # (16777216 * 512) / 4096
 MSG="Installing system partition..."
 
-if [[ "$ROOT" != [Nn]* ]]; then
-
-  tar xpfJ "$HDA.txz" --absolute-names --skip-old-files -C "$MOUNT/"
-
-  info "Install: $MSG" && html "$MSG"
-
-  mke2fs -q -t ext4 -b 4096 -d "$MOUNT/" -L "$LABEL" -F -E "offset=$OFFSET" "$SYSTEM" "$NUMBLOCKS"
-
-else
-
-  fakeroot -- bash -c "set -Eeu;\
-        tar xpfJ $HDA.txz --absolute-names --skip-old-files -C $MOUNT/;\
-        printf '%b%s%b' '\E[1;34m❯ \E[1;36m' 'Install: $MSG' '\E[0m\n';\
-        mke2fs -q -t ext4 -b 4096 -d $MOUNT/ -L $LABEL -F -E offset=$OFFSET $SYSTEM $NUMBLOCKS"
-
-fi
+fakeroot -- bash -c "set -Eeu;\
+  tar xpfJ $HDA.txz --absolute-names --skip-old-files -C $MOUNT/;\
+  printf '%b%s%b' '\E[1;34m❯ \E[1;36m' 'Install: $MSG' '\E[0m\n';\
+  mke2fs -q -t ext4 -b 4096 -d $MOUNT/ -L $LABEL -F -E offset=$OFFSET $SYSTEM $NUMBLOCKS"
 
 rm -rf "$MOUNT"
 echo "$BASE" > "$STORAGE/dsm.ver"

src/network.sh

@@ -4,10 +4,12 @@ set -Eeuo pipefail
 # Docker environment variables
 
 : "${MAC:=""}"
+: "${MTU:=""}"
 : "${DHCP:="N"}"
 : "${NETWORK:="Y"}"
-: "${HOST_PORTS:=""}"
 : "${USER_PORTS:=""}"
+: "${HOST_PORTS:=""}"
+: "${ADAPTER:="virtio-net-pci"}"
 
 : "${VM_NET_DEV:=""}"
 : "${VM_NET_TAP:="dsm"}"
@@ -35,11 +37,32 @@ configureDHCP() {
   fi
 
   # Create a macvtap network for the VM guest
-  { ip link add link "$VM_NET_DEV" name "$VM_NET_TAP" address "$VM_NET_MAC" type macvtap mode bridge ; rc=$?; } || :
+  { msg=$(ip link add link "$VM_NET_DEV" name "$VM_NET_TAP" address "$VM_NET_MAC" type macvtap mode bridge 2>&1); rc=$?; } || :
 
-  if (( rc != 0 )); then
-    error "Cannot create macvtap interface. Please make sure that the network type is 'macvlan' and not 'ipvlan',"
-    error "that your kernel is recent (>4) and supports it, and that the container has the NET_ADMIN capability set." && return 1
+  case "$msg" in
+    "RTNETLINK answers: File exists"* )
+      while ! ip link add link "$VM_NET_DEV" name "$VM_NET_TAP" address "$VM_NET_MAC" type macvtap mode bridge; do
+        info "Waiting for macvtap interface to become available.."
+        sleep 5
+      done  ;;
+    "RTNETLINK answers: Invalid argument"* )
+      error "Cannot create macvtap interface. Please make sure that the network type of the container is 'macvlan' and not 'ipvlan'."
+      return 1 ;;
+    "RTNETLINK answers: Operation not permitted"* )
+      error "No permission to create macvtap interface. Please make sure that your host kernel supports it and that the NET_ADMIN capability is set."
+      return 1 ;;
+    *)
+      [ -n "$msg" ] && echo "$msg" >&2
+      if (( rc != 0 )); then
+        error "Cannot create macvtap interface."
+        return 1
+      fi ;;
+  esac
+
+  if [[ "$MTU" != "0" ]] && [[ "$MTU" != "1500" ]]; then
+    if ! ip link set dev "$VM_NET_TAP" mtu "$MTU"; then
+      warn "Failed to set MTU size.."
+    fi
   fi
 
   while ! ip link set "$VM_NET_TAP" up; do
@@ -81,21 +104,33 @@ configureDHCP() {
 
 configureDNS() {
 
-  # dnsmasq configuration:
-  DNSMASQ_OPTS+=" --dhcp-range=$VM_NET_IP,$VM_NET_IP --dhcp-host=$VM_NET_MAC,,$VM_NET_IP,$VM_NET_HOST,infinite --dhcp-option=option:netmask,255.255.255.0"
-
   # Create lease file for faster resolve
   echo "0 $VM_NET_MAC $VM_NET_IP $VM_NET_HOST 01:$VM_NET_MAC" > /var/lib/misc/dnsmasq.leases
   chmod 644 /var/lib/misc/dnsmasq.leases
 
+  # dnsmasq configuration:
+  DNSMASQ_OPTS+=" --dhcp-authoritative"
+
+  # Set DHCP range and host
+  DNSMASQ_OPTS+=" --dhcp-range=$VM_NET_IP,$VM_NET_IP"
+  DNSMASQ_OPTS+=" --dhcp-host=$VM_NET_MAC,,$VM_NET_IP,$VM_NET_HOST,infinite"
+
   # Set DNS server and gateway
-  DNSMASQ_OPTS+=" --dhcp-option=option:dns-server,${VM_NET_IP%.*}.1 --dhcp-option=option:router,${VM_NET_IP%.*}.1"
+  DNSMASQ_OPTS+=" --dhcp-option=option:netmask,255.255.255.0"
+  DNSMASQ_OPTS+=" --dhcp-option=option:router,${VM_NET_IP%.*}.1"
+  DNSMASQ_OPTS+=" --dhcp-option=option:dns-server,${VM_NET_IP%.*}.1"
 
   # Add DNS entry for container
   DNSMASQ_OPTS+=" --address=/host.lan/${VM_NET_IP%.*}.1"
 
   DNSMASQ_OPTS=$(echo "$DNSMASQ_OPTS" | sed 's/\t/ /g' | tr -s ' ' | sed 's/^ *//')
 
+  if [[ "${DEBUG_DNS:-}" == [Yy1]* ]]; then
+   DNSMASQ_OPTS+=" -d"
+   $DNSMASQ ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS} &
+   return 0
+  fi
+
   if ! $DNSMASQ ${DNSMASQ_OPTS:+ $DNSMASQ_OPTS}; then
     error "Failed to start dnsmasq, reason: $?" && return 1
   fi
@@ -152,6 +187,9 @@ configureUser() {
 
 configureNAT() {
 
+  local tuntap="TUN device is missing. $ADD_ERR --device /dev/net/tun"
+  local tables="The 'ip_tables' kernel module is not loaded. Try this command: sudo modprobe ip_tables iptable_nat"
+
   # Create the necessary file structure for /dev/net/tun
   if [ ! -c /dev/net/tun ]; then
     [ ! -d /dev/net ] && mkdir -m 755 /dev/net
@@ -161,22 +199,20 @@ configureNAT() {
   fi
 
   if [ ! -c /dev/net/tun ]; then
-    error "TUN device missing. $ADD_ERR --device /dev/net/tun --cap-add NET_ADMIN" && return 1
+    [[ "$PODMAN" != [Yy1]* ]] && error "$tuntap"  
+    return 1
   fi
 
   # Check port forwarding flag
   if [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
     { sysctl -w net.ipv4.ip_forward=1 > /dev/null; rc=$?; } || :
     if (( rc != 0 )) || [[ $(< /proc/sys/net/ipv4/ip_forward) -eq 0 ]]; then
-      error "IP forwarding is disabled. $ADD_ERR --sysctl net.ipv4.ip_forward=1" && return 1
+      [[ "$PODMAN" != [Yy1]* ]] && error "IP forwarding is disabled. $ADD_ERR --sysctl net.ipv4.ip_forward=1"
+      return 1
     fi
   fi
 
-  local tables="The 'ip_tables' kernel module is not loaded. Try this command: sudo modprobe ip_tables iptable_nat"
-  local tuntap="The 'tun' kernel module is not available. Try this command: 'sudo modprobe tun' or run the container with 'privileged: true'."
-
   # Create a bridge with a static IP for the VM guest
-
   { ip link add dev dockerbridge type bridge ; rc=$?; } || :
 
   if (( rc != 0 )); then
@@ -184,7 +220,7 @@ configureNAT() {
   fi
 
   if ! ip address add "${VM_NET_IP%.*}.1/24" broadcast "${VM_NET_IP%.*}.255" dev dockerbridge; then
-    error "Failed to add IP address!" && return 1
+    error "Failed to add IP address pool!" && return 1
   fi
 
   while ! ip link set dockerbridge up; do
@@ -197,6 +233,18 @@ configureNAT() {
     error "$tuntap" && return 1
   fi
 
+  if [[ "$MTU" != "0" ]] && [[ "$MTU" != "1500" ]]; then
+    if ! ip link set dev "$VM_NET_TAP" mtu "$MTU"; then
+      warn "Failed to set MTU size.."
+    fi
+  fi
+
+  GATEWAY_MAC=$(echo "$VM_NET_MAC" | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:\1:\2:\3:\4:\5/')
+
+  if ! ip link set dev "$VM_NET_TAP" address "$GATEWAY_MAC"; then
+    warn "Failed to set gateway MAC address.."
+  fi
+
   while ! ip link set "$VM_NET_TAP" up promisc on; do
     info "Waiting for TAP to become available..."
     sleep 2
@@ -221,7 +269,7 @@ configureNAT() {
     error "Failed to configure IP tables!" && return 1
   fi
 
-  if ! iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p udp  -j DNAT --to "$VM_NET_IP"; then
+  if ! iptables -t nat -A PREROUTING -i "$VM_NET_DEV" -d "$IP" -p udp -j DNAT --to "$VM_NET_IP"; then
     error "Failed to configure IP tables!" && return 1
   fi
 
@@ -239,7 +287,23 @@ configureNAT() {
 
   NET_OPTS+=",script=no,downscript=no"
 
-  ! configureDNS && return 1
+  configureDNS || return 1
+
+  return 0
+}
+
+closeBridge() {
+
+  local pid="/var/run/dnsmasq.pid"
+  [ -s "$pid" ] && pKill "$(<"$pid")"
+
+  [[ "${NETWORK,,}" == "user"* ]] && return 0
+
+  ip link set "$VM_NET_TAP" down promisc off &> null || true
+  ip link delete "$VM_NET_TAP" &> null || true
+
+  ip link set dockerbridge down &> null || true
+  ip link delete dockerbridge &> null || true
 
   return 0
 }
@@ -259,26 +323,16 @@ closeNetwork() {
   exec 30<&- || true
   exec 40<&- || true
 
-  if [[ "$DHCP" == [Yy1]* ]]; then
+  if [[ "$DHCP" != [Yy1]* ]]; then
 
-    ip link set "$VM_NET_TAP" down || true
-    ip link delete "$VM_NET_TAP" || true
-
-  else
-
-    local pid="/var/run/dnsmasq.pid"
-    [ -s "$pid" ] && pKill "$(<"$pid")"
-
-    [[ "${NETWORK,,}" == "user"* ]] && return 0
-
-    ip link set "$VM_NET_TAP" down promisc off || true
-    ip link delete "$VM_NET_TAP" || true
-
-    ip link set dockerbridge down || true
-    ip link delete dockerbridge || true
+    closeBridge
+    return 0
 
   fi
 
+  ip link set "$VM_NET_TAP" down || true
+  ip link delete "$VM_NET_TAP" || true
+
   return 0
 }
 
@@ -286,13 +340,19 @@ checkOS() {
 
   local name
   local os=""
+  local if="macvlan"
   name=$(uname -a)
 
-  [[ "${name,,}" == *"darwin"* ]] && os="MacOS"
-  [[ "${name,,}" == *"microsoft"* ]] && os="Windows"
+  [[ "${name,,}" == *"darwin"* ]] && os="Docker Desktop for macOS"
+  [[ "${name,,}" == *"microsoft"* ]] && os="Docker Desktop for Windows"
+
+  if [[ "$DHCP" == [Yy1]* ]]; then
+    if="macvtap"
+    [[ "${name,,}" == *"synology"* ]] && os="Synology Container Manager"
+  fi
 
   if [ -n "$os" ]; then
-    warn "you are using Docker Desktop for $os which does not support macvlan, please revert to bridge networking!"
+    warn "you are using $os which does not support $if, please revert to bridge networking!"
   fi
 
   return 0
@@ -313,12 +373,33 @@ getInfo() {
 
   if [ ! -d "/sys/class/net/$VM_NET_DEV" ]; then
     error "Network interface '$VM_NET_DEV' does not exist inside the container!"
-    error "$ADD_ERR -e \"VM_NET_DEV=NAME\" to specify another interface name." && exit 27
+    error "$ADD_ERR -e \"VM_NET_DEV=NAME\" to specify another interface name." && exit 26
+  fi
+
+  BASE_IP="${VM_NET_IP%.*}."
+
+  if [ "${VM_NET_IP/$BASE_IP/}" -lt "3" ]; then
+    error "Invalid VM_NET_IP, must end in a higher number than .3" && exit 27
+  fi
+  
+  if [ -z "$MTU" ]; then
+    MTU=$(cat "/sys/class/net/$VM_NET_DEV/mtu")
+  fi
+
+  if [ "$MTU" -gt "1500" ]; then
+    info "MTU size is too large: $MTU, ignoring..." && MTU="0"
+  fi
+
+  if [[ "${ADAPTER,,}" != "virtio-net-pci" ]]; then
+    if [[ "$MTU" != "0" ]] && [[ "$MTU" != "1500" ]]; then
+      warn "MTU size is $MTU, but cannot be set for $ADAPTER adapters!" && MTU="0"
+    fi
   fi
 
   if [ -z "$VM_NET_MAC" ]; then
     local file="$STORAGE/dsm.mac"
     [ -s "$file" ] && VM_NET_MAC=$(<"$file")
+    VM_NET_MAC="${VM_NET_MAC//[![:print:]]/}"
     if [ -z "$VM_NET_MAC" ]; then
       # Generate MAC address based on Docker container ID in hostname
       VM_NET_MAC=$(echo "$HOST" | md5sum | sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:11:32:\3:\4:\5/')
@@ -338,8 +419,17 @@ getInfo() {
     error "Invalid MAC address: '$VM_NET_MAC', should be 12 or 17 digits long!" && exit 28
   fi
 
-  GATEWAY=$(ip route list dev "$VM_NET_DEV" | awk ' /^default/ {print $3}')
-  IP=$(ip address show dev "$VM_NET_DEV" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/)
+  GATEWAY=$(ip route list dev "$VM_NET_DEV" | awk ' /^default/ {print $3}' | head -n 1)
+  IP=$(ip address show dev "$VM_NET_DEV" | grep inet | awk '/inet / { print $2 }' | cut -f1 -d/ | head -n 1)
+
+  IP6=""
+  # shellcheck disable=SC2143
+  if [ -f /proc/net/if_inet6 ] && [ -n "$(ifconfig -a | grep inet6)" ]; then
+    IP6=$(ip -6 addr show dev "$VM_NET_DEV" scope global up)
+    [ -n "$IP6" ] && IP6=$(echo "$IP6" | sed -e's/^.*inet6 \([^ ]*\)\/.*$/\1/;t;d' | head -n 1)
+  fi
+
+  [ -f "/run/.containerenv" ] && PODMAN="Y" || PODMAN="N"
   echo "$IP" > /run/shm/qemu.ip
 
   return 0
@@ -358,8 +448,14 @@ getInfo
 html "Initializing network..."
 
 if [[ "$DEBUG" == [Yy1]* ]]; then
-  info "Host: $HOST  IP: $IP  Gateway: $GATEWAY  Interface: $VM_NET_DEV  MAC: $VM_NET_MAC"
-  [ -f /etc/resolv.conf ] && grep '^nameserver*' /etc/resolv.conf
+  mtu=$(cat "/sys/class/net/$VM_NET_DEV/mtu")
+  line="Host: $HOST  IP: $IP  Gateway: $GATEWAY  Interface: $VM_NET_DEV  MAC: $VM_NET_MAC  MTU: $mtu"
+  [[ "$MTU" != "0" ]] && [[ "$MTU" != "$mtu" ]] && line+=" ($MTU)"
+  info "$line"
+  if [ -f /etc/resolv.conf ]; then
+    nameservers=$(grep '^nameserver*' /etc/resolv.conf | head -c -1 | sed 's/nameserver //g;' | sed -z 's/\n/, /g')
+    [ -n "$nameservers" ] && info "Nameservers: $nameservers"
+  fi
   echo
 fi
 
@@ -367,6 +463,11 @@ if [[ "$IP" == "172.17."* ]]; then
   warn "your container IP starts with 172.17.* which will cause conflicts when you install the Container Manager package inside DSM!"
 fi
 
+if [[ -d "/sys/class/net/$VM_NET_TAP" ]]; then
+  info "Lingering interface will be removed..."
+  ip link delete "$VM_NET_TAP" || true
+fi
+
 if [[ "$DHCP" == [Yy1]* ]]; then
 
   checkOS
@@ -376,7 +477,7 @@ if [[ "$DHCP" == [Yy1]* ]]; then
   fi
 
   # Configure for macvtap interface
-  ! configureDHCP && exit 20
+  configureDHCP || exit 20
 
   MSG="Booting DSM instance..."
   html "$MSG"
@@ -396,14 +497,16 @@ else
     # Configure for tap interface
     if ! configureNAT; then
 
+      closeBridge
       NETWORK="user"
-      warn "falling back to usermode networking! Performance will be bad and port forwarding will not work."
-
-      ip link set "$VM_NET_TAP" down promisc off &> null || true
-      ip link delete "$VM_NET_TAP" &> null || true
-
-      ip link set dockerbridge down &> null || true
-      ip link delete dockerbridge &> null || true
+      msg="falling back to user-mode networking!"
+      if [[ "$PODMAN" != [Yy1]* ]]; then
+        msg="an error occured, $msg"
+      else
+        msg="podman detected, $msg"
+      fi
+      warn "$msg"
+      [ -z "$USER_PORTS" ] && info "Notice: port mapping will not work without \"USER_PORTS\" now."
 
     fi
 
@@ -411,13 +514,14 @@ else
 
   if [[ "${NETWORK,,}" == "user"* ]]; then
 
-    # Configure for usermode networking (slirp)
-    ! configureUser && exit 24
+    # Configure for user-mode networking (slirp)
+    configureUser || exit 24
 
   fi
 
 fi
 
-NET_OPTS+=" -device virtio-net-pci,romfile=,netdev=hostnet0,mac=$VM_NET_MAC,id=net0"
+NET_OPTS+=" -device $ADAPTER,id=net0,netdev=hostnet0,romfile=,mac=$VM_NET_MAC"
+[[ "$MTU" != "0" ]] && [[ "$MTU" != "1500" ]] && NET_OPTS+=",host_mtu=$MTU"
 
 return 0

src/proc.sh

@@ -9,6 +9,24 @@ set -Eeuo pipefail
 : "${CPU_MODEL:=""}"
 : "${DEF_MODEL:="qemu64"}"
 
+CLOCKSOURCE="tsc"
+[[ "${ARCH,,}" == "arm64" ]] && CLOCKSOURCE="arch_sys_counter"
+CLOCK="/sys/devices/system/clocksource/clocksource0/current_clocksource"
+
+if [ ! -f "$CLOCK" ]; then
+  warn "file \"$CLOCK\" cannot not found?"
+else
+  result=$(<"$CLOCK")
+  result="${result//[![:print:]]/}"
+  case "${result,,}" in
+    "${CLOCKSOURCE,,}" ) ;;
+    "kvm-clock" ) info "Nested KVM virtualization detected.." ;;
+    "hyperv_clocksource_tsc_page" ) info "Nested Hyper-V virtualization detected.." ;;
+    "hpet" ) warn "unsupported clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'." ;;
+    *) warn "unexpected clock source detected: '$result'. Please set host clock source to '$CLOCKSOURCE'." ;;
+  esac
+fi
+
 if [[ "${ARCH,,}" != "amd64" ]]; then
   KVM="N"
   warn "your CPU architecture is ${ARCH^^} and cannot provide KVM acceleration for x64 instructions, this will cause a major loss of performance."
@@ -34,15 +52,11 @@ if [[ "$KVM" != [Nn]* ]]; then
   if [ -n "$KVM_ERR" ]; then
     KVM="N"
     if [[ "$OSTYPE" =~ ^darwin ]]; then
-      warn "you are using MacOS which has no KVM support, this will cause a major loss of performance."
+      warn "you are using macOS which has no KVM support, this will cause a major loss of performance."
     else
-      if grep -qi Microsoft /proc/version; then
-        warn "you are using Windows 10 which has no KVM support, this will cause a major loss of performance."
-      else
-        error "KVM acceleration not available $KVM_ERR, this will cause a major loss of performance."
-        error "See the FAQ on how to diagnose the cause, or continue without KVM by setting KVM=N (not recommended)."
-        [[ "$DEBUG" != [Yy1]* ]] && exit 88
-      fi
+      error "KVM acceleration not available $KVM_ERR, this will cause a major loss of performance."
+      error "See the FAQ on how to diagnose the cause, or continue without KVM by setting KVM=N (not recommended)."
+      [[ "$DEBUG" != [Yy1]* ]] && exit 88
     fi
   fi
 
@@ -51,7 +65,6 @@ fi
 if [[ "$KVM" != [Nn]* ]]; then
 
   CPU_FEATURES="kvm=on,l3-cache=on,+hypervisor"
-  CLOCK="/sys/devices/system/clocksource/clocksource0/current_clocksource"
   KVM_OPTS=",accel=kvm -enable-kvm -global kvm-pit.lost_tick_policy=discard"
 
   if ! grep -qw "sse4_2" <<< "$flags"; then
@@ -65,15 +78,6 @@ if [[ "$KVM" != [Nn]* ]]; then
     CPU_FEATURES+=",migratable=no"
   fi
 
-  if [ -f "$CLOCK" ]; then
-    CLOCK=$(<"$CLOCK")
-    if [[ "${CLOCK,,}" != "tsc" ]]; then
-      warn "unexpected clocksource: $CLOCK"
-    fi
-  else
-    warn "file \"$CLOCK\" cannot not found?"
-  fi
-
   if grep -qw "svm" <<< "$flags"; then
 
     # AMD processor
@@ -131,7 +135,7 @@ else
 fi
 
 if [ -z "$HOST_CPU" ]; then
-  HOST_CPU=$(lscpu | grep -m 1 'Model name' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
+  [[ "${CPU,,}" != "unknown" ]] && HOST_CPU="$CPU"
 fi
 
 if [ -n "$HOST_CPU" ]; then

src/progress.sh

@@ -26,7 +26,7 @@ do
     bytes=$(du -sb "$file" | cut -f1)
     if (( bytes > 1000 )); then
       if [ -z "$total" ] || [[ "$total" == "0" ]]; then
-        size=$(numfmt --to=iec --suffix=B  "$bytes" | sed -r 's/([A-Z])/ \1/')
+        size=$(numfmt --to=iec --suffix=B "$bytes" | sed -r 's/([A-Z])/ \1/')
       else
         size="$(echo "$bytes" "$total" | awk '{printf "%.1f", $1 * 100 / $2}')"
         size="$size%"

src/reset.sh

@@ -1,10 +1,6 @@
 #!/usr/bin/env bash
 set -Eeuo pipefail
 
-info () { printf "%b%s%b" "\E[1;34m❯ \E[1;36m" "${1:-}" "\E[0m\n"; }
-error () { printf "%b%s%b" "\E[1;31m❯ " "ERROR: ${1:-}" "\E[0m\n" >&2; }
-warn () { printf "%b%s%b" "\E[1;31m❯ " "Warning: ${1:-}" "\E[0m\n" >&2; }
-
 trap 'error "Status $? while: $BASH_COMMAND (line $LINENO/$BASH_LINENO)"' ERR
 
 [ ! -f "/run/entry.sh" ] && error "Script must run inside Docker container!" && exit 11
@@ -15,30 +11,30 @@ echo "❯ For support visit $SUPPORT"
 
 # Docker environment variables
 
-: "${TZ:=""}"             # System local timezone
-: "${DEBUG:="N"}"         # Disable debugging mode
-: "${COUNTRY:=""}"        # Country code for mirror
-: "${CONSOLE:="N"}"       # Disable console mode
-: "${ALLOCATE:=""}"       # Preallocate diskspace
-: "${ARGUMENTS:=""}"      # Extra QEMU parameters
-: "${CPU_CORES:="1"}"     # Amount of CPU cores
-: "${RAM_SIZE:="1G"}"     # Maximum RAM amount
-: "${RAM_CHECK:="Y"}"     # Check available RAM
-: "${DISK_SIZE:="16G"}"   # Initial data disk size
+: "${TZ:=""}"              # System local timezone
+: "${DEBUG:="N"}"          # Disable debugging mode
+: "${COUNTRY:=""}"         # Country code for mirror
+: "${CONSOLE:="N"}"        # Disable console mode
+: "${ALLOCATE:=""}"        # Preallocate diskspace
+: "${ARGUMENTS:=""}"       # Extra QEMU parameters
+: "${CPU_CORES:="1"}"      # Amount of CPU cores
+: "${RAM_SIZE:="1G"}"      # Maximum RAM amount
+: "${RAM_CHECK:="Y"}"      # Check available RAM
+: "${DISK_SIZE:="16G"}"    # Initial data disk size
+: "${STORAGE:="/storage"}" # Storage folder location
 
 # Helper variables
 
 PROCESS="${APP,,}"
 PROCESS="${PROCESS// /-}"
 
-STORAGE="/storage"
 INFO="/run/shm/msg.html"
 PAGE="/run/shm/index.html"
 TEMPLATE="/var/www/index.html"
 FOOTER1="$APP for Docker v$(</run/version)"
 FOOTER2="<a href='$SUPPORT'>$SUPPORT</a>"
 
-CPI=$(lscpu)
+CPU=$(cpu)
 SYS=$(uname -r)
 HOST=$(hostname -s)
 KERNEL=$(echo "$SYS" | cut -b 1)
@@ -46,18 +42,13 @@ MINOR=$(echo "$SYS" | cut -d '.' -f2)
 ARCH=$(dpkg --print-architecture)
 CORES=$(grep -c '^processor' /proc/cpuinfo)
 
-if ! grep -qi "socket(s)" <<< "$CPI"; then
+if ! grep -qi "socket(s)" <<< "$(lscpu)"; then
   SOCKETS=1
 else
-  SOCKETS=$(echo "$CPI" | grep -m 1 -i 'socket(s)' | awk '{print $(2)}')
+  SOCKETS=$(lscpu | grep -m 1 -i 'socket(s)' | awk '{print $(2)}')
 fi
 
-if ! grep -qi "model name" <<< "$CPI"; then
-  CPU="Unknown"
-else
-  CPU=$(echo "$CPI" | grep -m 1 -i 'model name' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
-  CPU="${CPU// with Radeon Graphics/}"
-fi
+[ -n "${CPU_CORES//[0-9 ]}" ] && error "Invalid amount of CPU_CORES: $CPU_CORES" && exit 15
 
 # Check system
 
@@ -69,6 +60,11 @@ fi
 
 # Check folder
 
+if [[ "${COMMIT:-}" == [Yy1]* ]]; then
+  STORAGE="/local"
+  mkdir -p "$STORAGE"
+fi
+
 if [ ! -d "$STORAGE" ]; then
   error "Storage folder ($STORAGE) not found!" && exit 13
 fi
@@ -85,28 +81,39 @@ fi
 RAM_SPARE=500000000
 RAM_AVAIL=$(free -b | grep -m 1 Mem: | awk '{print $7}')
 RAM_TOTAL=$(free -b | grep -m 1 Mem: | awk '{print $2}')
+
+RAM_SIZE="${RAM_SIZE// /}"
+[ -z "$RAM_SIZE" ] && error "RAM_SIZE not specified!" && exit 16
+
+if [ -z "${RAM_SIZE//[0-9. ]}" ]; then
+  [ "${RAM_SIZE%%.*}" -lt "130" ] && RAM_SIZE="${RAM_SIZE}G" || RAM_SIZE="${RAM_SIZE}M"
+fi
+
 RAM_SIZE=$(echo "${RAM_SIZE^^}" | sed 's/MB/M/g;s/GB/G/g;s/TB/T/g')
+! numfmt --from=iec "$RAM_SIZE" &>/dev/null && error "Invalid RAM_SIZE: $RAM_SIZE" && exit 16
 RAM_WANTED=$(numfmt --from=iec "$RAM_SIZE")
-AVAIL_GB=$(( RAM_AVAIL/1073741824 ))
-TOTAL_GB=$(( (RAM_TOTAL + 1073741823)/1073741824 ))
-WANTED_GB=$(( (RAM_WANTED + 1073741823)/1073741824 ))
+[ "$RAM_WANTED" -lt "136314880 " ] && error "RAM_SIZE is too low: $RAM_SIZE" && exit 16
 
 # Print system info
 SYS="${SYS/-generic/}"
+FS="${FS/UNKNOWN //}"
 FS="${FS/ext2\/ext3/ext4}"
+FS=$(echo "$FS" | sed 's/[)(]//g')
 SPACE=$(df --output=avail -B 1 "$STORAGE" | tail -n 1)
-SPACE_GB=$(( (SPACE + 1073741823)/1073741824 ))
+SPACE_GB=$(formatBytes "$SPACE" "down")
+AVAIL_MEM=$(formatBytes "$RAM_AVAIL" "down")
+TOTAL_MEM=$(formatBytes "$RAM_TOTAL" "up")
 
-echo "❯ CPU: ${CPU} | RAM: $AVAIL_GB/$TOTAL_GB GB | DISK: $SPACE_GB GB (${FS}) | HOST: ${SYS}..."
+echo "❯ CPU: ${CPU} | RAM: ${AVAIL_MEM/ GB/}/$TOTAL_MEM | DISK: $SPACE_GB (${FS}) | KERNEL: ${SYS}..."
 echo
 
-# Check memory
+# Check available memory
 
-if [[ "$RAM_CHECK" != [Nn]* ]]; then
-  if (( (RAM_WANTED + RAM_SPARE) > RAM_AVAIL )); then
-    error "Your configured RAM_SIZE of $WANTED_GB GB is too high for the $AVAIL_GB GB of memory available, please set a lower value."
-    exit 17
-  fi
+if [[ "$RAM_CHECK" != [Nn]* ]] && (( (RAM_WANTED + RAM_SPARE) > RAM_AVAIL )); then
+  AVAIL_MEM=$(formatBytes "$RAM_AVAIL")
+  msg="Your configured RAM_SIZE of ${RAM_SIZE/G/ GB} is too high for the $AVAIL_MEM of memory available, please set a lower value."
+  [[ "${FS,,}" != "zfs" ]] && error "$msg" && exit 17
+  info "$msg"
 fi
 
 # Cleanup files
@@ -117,91 +124,6 @@ rm -f /run/shm/dsm.url
 rm -rf /tmp/dsm
 rm -rf "$STORAGE/tmp"
 
-# Helper functions
-
-isAlive() {
-  local pid=$1
-
-  if kill -0 "$pid" 2>/dev/null; then
-    return 0
-  fi
-
-  return 1
-}
-
-pKill() {
-  local pid=$1
-
-  { kill -15 "$pid" || true; } 2>/dev/null
-
-  while isAlive "$pid"; do
-    sleep 0.2
-  done
-
-  return 0
-}
-
-fWait() {
-  local name=$1
-
-  while pgrep -f -l "$name" >/dev/null; do
-    sleep 0.2
-  done
-
-  return 0
-}
-
-fKill() {
-  local name=$1
-
-  { pkill -f "$name" || true; } 2>/dev/null
-  fWait "$name"
-
-  return 0
-}
-
-escape () {
-    local s
-    s=${1//&/\&amp;}
-    s=${s//</\&lt;}
-    s=${s//>/\&gt;}
-    s=${s//'"'/\&quot;}
-    printf -- %s "$s"
-    return 0
-}
-
-html()
-{
-    local title
-    local body
-    local script
-    local footer
-
-    title=$(escape "$APP")
-    title="<title>$title</title>"
-    footer=$(escape "$FOOTER1")
-
-    body=$(escape "$1")
-    if [[ "$body" == *"..." ]]; then
-      body="<p class=\"loading\">${body/.../}</p>"
-    fi
-
-    [ -n "${2:-}" ] && script="$2" || script=""
-
-    local HTML
-    HTML=$(<"$TEMPLATE")
-    HTML="${HTML/\[1\]/$title}"
-    HTML="${HTML/\[2\]/$script}"
-    HTML="${HTML/\[3\]/$body}"
-    HTML="${HTML/\[4\]/$footer}"
-    HTML="${HTML/\[5\]/$FOOTER2}"
-
-    echo "$HTML" > "$PAGE"
-    echo "$body" > "$INFO"
-
-    return 0
-}
-
 getCountry() {
   local url=$1
   local query=$2
@@ -262,6 +184,17 @@ addPackage() {
   return 0
 }
 
+# shellcheck disable=SC2143
+if [ -f /proc/net/if_inet6 ] && [ -n "$(ifconfig -a | grep inet6)" ]; then
+
+  sed -i "s/listen 5000 default_server;/listen [::]:5000 default_server ipv6only=off;/g" /etc/nginx/sites-enabled/web.conf
+
+else
+
+  sed -i "s/listen [::]:5000 default_server ipv6only=off;/listen 5000 default_server;/g" /etc/nginx/sites-enabled/web.conf
+
+fi
+
 # Start webserver
 cp -r /var/www/* /run/shm
 html "Starting $APP for Docker..."

src/utils.sh

@@ -0,0 +1,171 @@
+#!/usr/bin/env bash
+set -Eeuo pipefail
+
+# Helper functions
+
+info () { printf "%b%s%b" "\E[1;34m❯ \E[1;36m" "${1:-}" "\E[0m\n"; }
+error () { printf "%b%s%b" "\E[1;31m❯ " "ERROR: ${1:-}" "\E[0m\n" >&2; }
+warn () { printf "%b%s%b" "\E[1;31m❯ " "Warning: ${1:-}" "\E[0m\n" >&2; }
+
+formatBytes() {
+  local result
+  result=$(numfmt --to=iec --suffix=B "$1" | sed -r 's/([A-Z])/ \1/' | sed 's/ B/ bytes/g;')
+  local unit="${result//[0-9. ]}"
+  result="${result//[a-zA-Z ]/}"
+  if [[ "${2:-}" == "up" ]]; then
+    if [[ "$result" == *"."* ]]; then
+      result="${result%%.*}"
+      result=$((result+1))
+    fi
+  else
+    if [[ "${2:-}" == "down" ]]; then
+      result="${result%%.*}"
+    fi
+  fi
+  echo "$result $unit"
+  return 0
+}
+
+isAlive() {
+  local pid="$1"
+
+  if kill -0 "$pid" 2>/dev/null; then
+    return 0
+  fi
+
+  return 1
+}
+
+pKill() {
+  local pid="$1"
+
+  { kill -15 "$pid" || true; } 2>/dev/null
+
+  while isAlive "$pid"; do
+    sleep 0.2
+  done
+
+  return 0
+}
+
+fWait() {
+  local name="$1"
+
+  while pgrep -f -l "$name" >/dev/null; do
+    sleep 0.2
+  done
+
+  return 0
+}
+
+fKill() {
+  local name="$1"
+
+  { pkill -f "$name" || true; } 2>/dev/null
+  fWait "$name"
+
+  return 0
+}
+
+escape () {
+  local s
+  s=${1//&/\&}
+  s=${s//</\&lt;}
+  s=${s//>/\&gt;}
+  s=${s//'"'/\&quot;}
+  printf -- %s "$s"
+  return 0
+}
+
+html() {
+  local title
+  local body
+  local script
+  local footer
+
+  title=$(escape "$APP")
+  title="<title>$title</title>"
+  footer=$(escape "$FOOTER1")
+
+  body=$(escape "$1")
+  if [[ "$body" == *"..." ]]; then
+    body="<p class=\"loading\">${body/.../}</p>"
+  fi
+
+  [ -n "${2:-}" ] && script="$2" || script=""
+
+  local HTML
+  HTML=$(<"$TEMPLATE")
+  HTML="${HTML/\[1\]/$title}"
+  HTML="${HTML/\[2\]/$script}"
+  HTML="${HTML/\[3\]/$body}"
+  HTML="${HTML/\[4\]/$footer}"
+  HTML="${HTML/\[5\]/$FOOTER2}"
+
+  echo "$HTML" > "$PAGE"
+  echo "$body" > "$INFO"
+
+  return 0
+}
+
+cpu() {
+  local ret
+  local cpu=""
+
+  ret=$(lscpu)
+  
+  if grep -qi "model name" <<< "$ret"; then
+    cpu=$(echo "$ret" | grep -m 1 -i 'model name' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
+  fi
+  
+  if [ -z "${cpu// /}" ] && grep -qi "model:" <<< "$ret"; then
+    cpu=$(echo "$ret" | grep -m 1 -i 'model:' | cut -f 2 -d ":" | awk '{$1=$1}1' | sed 's# @.*##g' | sed s/"(R)"//g | sed 's/[^[:alnum:] ]\+/ /g' | sed 's/  */ /g')
+  fi
+  
+  cpu="${cpu// CPU/}"
+  cpu="${cpu// 4 Core/}"
+  cpu="${cpu// 6 Core/}"
+  cpu="${cpu// 8 Core/}"
+  cpu="${cpu// 10 Core/}"
+  cpu="${cpu// 12 Core/}"
+  cpu="${cpu// 16 Core/}"
+  cpu="${cpu// 32 Core/}"
+  cpu="${cpu// 64 Core/}"
+  cpu="${cpu//7th Gen /}"
+  cpu="${cpu//8th Gen /}"
+  cpu="${cpu//9th Gen /}"
+  cpu="${cpu//10th Gen /}"
+  cpu="${cpu//11th Gen /}"
+  cpu="${cpu//12th Gen /}"
+  cpu="${cpu//13th Gen /}"
+  cpu="${cpu//14th Gen /}"
+  cpu="${cpu//15th Gen /}"
+  cpu="${cpu// Processor/}"
+  cpu="${cpu// Quad core/}"
+  cpu="${cpu// Dual core/}"
+  cpu="${cpu// Octa core/}"
+  cpu="${cpu// Core TM/ Core}"
+  cpu="${cpu// with Radeon Graphics/}"
+  cpu="${cpu// with Radeon Vega Graphics/}"
+  
+  [ -z "${cpu// /}" ] && cpu="Unknown"
+
+  echo "$cpu"
+  return 0
+}
+
+hasDisk() {
+
+  [ -b "/disk" ] && return 0
+  [ -b "/disk1" ] && return 0
+  [ -b "/dev/disk1" ] && return 0
+  [ -b "${DEVICE:-}" ] && return 0
+
+  [ -z "${DISK_NAME:-}" ] && DISK_NAME="data"
+  [ -s "$STORAGE/$DISK_NAME.img" ]  && return 0
+  [ -s "$STORAGE/$DISK_NAME.qcow2" ] && return 0
+
+  return 1
+}
+
+return 0

web/conf/nginx.conf

@@ -1,5 +1,4 @@
 server {
-    listen 80;
     listen 5000 default_server;
 
     autoindex on;

web/index.html

@@ -5,8 +5,8 @@
         [1]
         <meta http-equiv="Cache-Control" content="no-cache" />
         <meta name="viewport" content="width=device-width, initial-scale=1.0" />
-        <link rel="stylesheet" type="text/css" href="/css/style.css" />
-        <link rel="icon" href="/img/favicon.svg" type="image/x-icon">
+        <link rel="stylesheet" type="text/css" href="css/style.css" />
+        <link rel="icon" href="img/favicon.svg" type="image/x-icon">
         [2]
     </head>
 
@@ -28,7 +28,7 @@
                 [5]
             </footer>
         </div>
-        <script type="text/javascript" src="/js/script.js"></script>
+        <script type="text/javascript" src="js/script.js"></script>
     </body>
 
 </html>

web/js/script.js

@@ -3,7 +3,7 @@ var interval = 1000;
 
 function getInfo() {
 
-    var url = "/msg.html";
+    var url = "msg.html";
 
     try {